Abstract
Stainless steel is used as a new generation of long-span metal roof systems with continuous welding technology, which exhibits many unknown behaviors during temperature action. This study focuses on the temperature effect of a continuous welded stainless steel roof (CWSSR) system and analyzes the stress distribution of plate rib (PR), plate surface (PS), and support (SU), and the horizontal and vertical displacement. Furthermore, the thermal action of the CWSSR system is comprehensively analyzed considering different loading rates, constant temperature time, and the cycle number. Research results show that the stress concentration and thermal expansion of the CWSSR system are obvious, and fatigue damage occurs under long-term temperature action. The responses of the CWSSR system are greatly influenced by the loading rate and the cycle number but are less influenced by the constant temperature time. Loading rate and the cycle number mainly affect the plate surface stress and vertical displacement. The plate surface stress and vertical displacement peak increased by 34.6% and 29.6% with the loading rate, and changed by 32.4% and 42.5% with the cycle number. Cyclic loading reduces support tensile capacity by 4.4%. The research results can provide reference for the design and application of temperature field resistance of the CWSSR system.
Similar content being viewed by others
References
AISI-S905 (2013) Test standard for determining the strength and deformation characteristics of cold-formed steel connection. AISI-S905, American Iron and Steel Institute, Washington DC, USA
ANSI/FM 4474 (2004) Test standard for evaluating the simulated wind uplift resistance of roof assemblies using static positive and negative differential pressures. ANSI/FM 4474, American National Standards Institute, Washington DC, USA
ASTM E1592-05 (2017) Standard test method for structural performance of sheet metal roof and siding systems by uniform static air pressure difference. ASTM E1592-05, ASTM International, West Conshohocken, PA, USA
Awaad MS, Shallal MA (2017) Experimental study of steel-concrete bridge girder subjected to environmental condition. Journal of Physics: Conference Series 1895, DOI: https://doi.org/10.1088/1742-6596/1895/1/012067
Bradford MA, Luu TK, Heidarpour A (2008) Generic nonlinear modeling of a steel beam in a frame sub-assembly at elevated temperatures. Journal of Constructional Steel Research 64:732–736, DOI: https://doi.org/10.1016/j.jcsr.2007.12.015
CSA-A123.21-14 (2015) Standard test method for the dynamic wind uplift resistance of membrane-roofing systems. CSA-A123.21-14, Standards Council of Canada, Ottawa, ON, Canada
CWCT (2005) Standard test methods for building envelopes. In: Section 18: Standard thermal cycling regime. Center for Window and Cladding Technology, Bath, UK
Fan Z, Liu XM, Fan XW, Hu TB, Wu XM, Yu YQ (2007) Design and research on the large-span steel structure of the National Stadium. Journal of Building Structures 28:1–16, DOI: https://doi.org/10.14006/j.jzjgxb.2007.02.001 (in Chinese)
He J, Xin HH, Wang YJ, José AFOC (2021) Effect of temperature loading on the performance of a PC bridge in Oklahoma: Reliability analysis. Structures 34:51–60, DOI: https://doi.org/10.1016/J.ISTRUC.2021.06.099
Holmes JD (2015) Wind loading of structures. CRC Press, Oakville, ON, Canada, 70–83
Kot P, Ali AS, Shaw A, Alias AM (2016) The application of electromagnetic waves in monitoring water infiltration on the concrete flat roof: The case of Malaysia. Construction and Building Materials 30:435–445, DOI: https://doi.org/10.1016/j.conbuildmat.2016.06.092
Li JY, Tong LW, Wu JM, Pan YM (2019) Numerical investigation of wind pressure coefficients for photovoltaic arrays mounted on building roofs. KSCE Journal of Civil Engineering 23(8):3606–3615, DOI: https://doi.org/10.1007/s12205-019-2320-3
Liu HB, Chen ZH, Zhou T (2012) Theoretical and experimental study on the temperature distribution of H-shaped steel members under solar radiation. Applied Thermal Engineering 37:329–335, DOI: https://doi.org/10.1016/j.applthermaleng.2011.11.045
Luan W, Li YQ (2019) Experimental investigation on wind uplift capacity of single-span Z-purlins supporting standing seam roof systems. Thin-Walled Structures 144:106324, DOI: https://doi.org/10.1016/j.tws.2019.106324
Ma NJ, Gu LX, Peng CL (2021) An adjustment technique for tensions in the cables of concrete cable-stayed bridges considering the effect of cable-girder temperature difference. KSCE Journal of Civil Engineering 25(5):1806–1815, DOI: https://doi.org/10.1007/S12205-021-1145-Z
Min QL, Li N, Zhang YJ, Lu QR, Liu XD (2021) A novel wind resistance sliding support with large sliding displacement and high tensile strength for metal roof system. Engineering Structures 243:112670, DOI: https://doi.org/10.1016/J.ENGSTRUCT.2021.112670
Morrison MJ, Kopp GA (2010) Analysis of wind-induced clip loads on standing seam metal roof. Journal of Structural Engineering 136:334–337
Myuran K, Mahendran M (2017) New test and design methods for steel roof battens subject to fatigue pull-through failures. Thin-Walled Structures 119:558–571, DOI: https://doi.org/10.1016/j.tws.2017.07.007
Ou T, Wang DY, Xin ZY, Tan, Zhang YS (2020) Full-scale tests on the mechanical behavior of a continuously welded stainless steel roof under wind excitation. Thin-Walled Structures 150, DOI: https://doi.org/10.1016/j.tws.2020.106680
Sivapathasundaram M, Mahendran M (2016) Development of fragility curves for localized pull-through failures of thin steel roof battens. Engineering Structures 124:64–84, DOI: https://doi.org/10.1016/j.engstruct.2016.05.055
Wang Y, Lin C, Shi Y (2010) Experimental study on the temperature of steel structure members unsder open-air sunshine. Journal of Building Structures 31:140–147, DOI: https://doi.org/10.14006/j.jzjgxb.2010.s1.026 (in Chinese)
Wang MM, Ou T, Xin ZY, Wang DY, Zhang YS (2021a) Mechanical behavior and fatigue failure analysis of standing seam aluminum alloy roof system under temperature effect. Journal of Building Engineering 44, DOI: https://doi.org/10.1016/J.JOBE.2021.103001
Wang MM, Ou T, Xin ZY, Wang DY, Zhang YS, Cui L (2021b) Experimental study on static temperature field effect on standing seam metal roof system. Structures 31:1–13, DOI: https://doi.org/10.1016/j.istruc.2021.01.078
Acknowledgments
National Natural Science Foundation of China (51878191, 51778162) and Innovation Research Project (2020GDJC-D11).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, M., Ou, T., Xin, Z. et al. Experimental Study on Mechanical Properties of Continuous Welding Stainless Steel Roof System under Temperature Effect. KSCE J Civ Eng 26, 837–847 (2022). https://doi.org/10.1007/s12205-021-0633-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-021-0633-5