Skip to main content

Experimental Study on Performance of Hardened Concrete Using Nano Materials

Abstract

Various challenges encountered in the construction industry has led to the production of concrete, with not just high strength, but also with enhanced durability properties. Several research works have been carried out using replacement of constituent materials and introduction of various admixtures in concrete. Alccofine is one of such promising micro fine material. This study investigates the performance of hardened concrete using nano materials. Effects of alccofine (AL) and zinc oxide (ZnO) on the durability and strength of hardened concrete were explored. Series of tests were conducted by substituting cement by weight with 10% AL and adding ZnO in proportions, 0.25%, 0.5%, 0.75% and 1%. Based on the results obtained, the strength properties of concrete reduced as cement replacement level rose beyond 10%. The durability performance of the concrete, in terms of rapid chloride permeability, water permeability test, sea water attack and chloride resistance, was within acceptable limist, even as the ZnO was increased. This study has generally proposed a sustainable solution to produce durable concrete that could have useful aaplication in the construction industry.

This is a preview of subscription content, access via your institution.

References

  1. Anshul P, Archana T (2017) Effect of zinc oxide nanoparticle on compressive strength and durability of concrete. International Journal for Research in Applied Science & Engineering Technology 5(8):683–687

    Google Scholar 

  2. Arefi MR, Rezaei-Zarchi S (2012) Synthesis of zinc oxide nanoparticles and their effect on the compressive strength and setting time of self-compacted concrete paste as cementitious composites. International Journal of Molecular Sciences 13:4340–4350, DOI: https://doi.org/10.3390/ijms13044340

    Article  Google Scholar 

  3. ASTM C1202 (2010) Test method for electrical indication of concrete’s ability to resist chloride ion penetration. ASTM International, West Conshohocken, PA, USA

    Google Scholar 

  4. Awoyera PO, Adesina A, Gobinath R (2019) Role of recycling fine materials as filler for improving performance of concrete - A review. Australian Journal of Civil Engineering 17(2):85–95, DOI: https://doi.org/10.1080/14488353.2019.1626692

    Article  Google Scholar 

  5. Awoyera PO, Akinmusuru JO, Dawson AR, Ndambuki JM, Thom NH (2018) Microstructural characteristics, porosity and strength development in ceramic-laterized concrete. Cement and Concrete Composite 86:224–237, DOI: https://doi.org/10.1016/j.cemconcomp.2017.11.017

    Article  Google Scholar 

  6. Behfarnia K, Keivan A (2013) The effects of tio2 and zno nanoparticles on physical and mechanical properties of normal concrete. Asian Journal of Civil Engineering 14(4):517–531

    Google Scholar 

  7. Chandramouli K, Srinivasa RP, Seshadri ST, Pannirselvam N, Sravana P (2010) Rapid chloride permeability test for durability studies on glass fibre reinforced concrete. ARPN Journal of Engineering and Applied Sciences 5(3):67–71

    Google Scholar 

  8. Devi M, Kannan K (2013) Evaluation of corrosion inhibition performance of zinc oxide and sodium nitrite in quarry dust concrete. Asian Journal of Chemistry 25(15):8690–8696, DOI: https://doi.org/10.14233/ajchem.2013.15237

    Article  Google Scholar 

  9. Erhan G, Mehmet G, Kasım M, Suleyman I (2014) Experimental investigation on durability performance of rubberized concrete. Advances in Concrete Construction 2(3):193–207, DOI: https://doi.org/10.12989/acc.2014.2.3.193

    Article  Google Scholar 

  10. Han B, Zhang L, Zeng S, Dong S, Yu X, Yang R, Ou J (2017) Nano-core effect in nano-engineered cementitous composites. Composites Part A 95:100–109, DOI: https://doi.org/10.1016/j.compositesa.2017.01.008

    Article  Google Scholar 

  11. Han B, Zhang L, Zeng S, Dong S, Yu X, Yang R, Ou J (2019) Nano-engineered cementitious composites: Principles and practices. Springer, Singapore, DOI: https://doi.org/10.1007/978-981-13-7078-6

    Book  Google Scholar 

  12. IS 383 (1970) Specification for coarse and fine aggregates from natural sources for concrete. IS 383, Bureau of Indian Standards, New Delhi, India

    Google Scholar 

  13. IS 516 (1959) Method of tests for strength of concrete. IS 516, Bureau of Indian Standards, New Delhi, India

    Google Scholar 

  14. IS 3085 (1965) Method of test for permeability of cement mortar and concrete. IS 3085, Bureau of Indian Standards, New Delhi, India

    Google Scholar 

  15. IS 10262 (2009) Guidelines for concrete mix proportioning. IS 10262, Bureau of Indian Standards, New Delhi, India

    Google Scholar 

  16. IS 12269 (1987) Specification for 53 grade ordina’ry portland cement. IS 12269, Bureau of Indian Standards, New Delhi, India

    Google Scholar 

  17. Nivethitha D, Dharmar S (2016) Influence of zinc oxide nano particle on strength and durability of cement mortar. International Journal of Earth and Science Engineering 9(3):175–181

    Google Scholar 

  18. Parveen P, Dhirendra SB, Bharat BJ (2017) Experimental study on geopolymer concrete prepared using high-silica RHA incorporating alccofine. Advances in Concrete Construction 5(4):345–358, DOI: https://doi.org/10.12989/acc.2017.5.4.345

    Google Scholar 

  19. Prasanna TM, Sandya DS, Arjun B (2015) Experimental study on development of normal strength concrete and high strength concrete using alccofine. International Research Journal of Engineering and Technology 2(5):203–209

    Google Scholar 

  20. Preeti T, Rajiv C, Yadav RK (2014) Effect of salt water on compressive strength of concrete. International Journal of Engineering Research and Applications 4(4):38–42

    Google Scholar 

  21. Rajesh KS, Amiya KS, Dilip KS (2015) An experimental study on the mechanical properties of alccofine based high grade concrete. International Journal of Multidisciplinary Research and Development 2(10):218–224

    Google Scholar 

  22. Saraswathy V, Song HW (2007) Improving the durability of concrete by using inhibitors. Building and Environment 42:464–472, DOI: https://doi.org/10.1016/j.buildenv.2005.08.003

    Article  Google Scholar 

  23. Suresh SS, Revathi JJ (2016) Comparison of high performance fly ash concrete using nano silica fume on different mixes. Circuits and Systems 7:1259–267, DOI: https://doi.org/10.4236/cs.2016.78110

    Article  Google Scholar 

  24. Shetty MS (1982) Concrete technology theory and practices. SChand Publications, New Delhi, India

    Google Scholar 

  25. Thangapandi K, Anuradha R, Swart SJ, Muthuselvan G, Agnelkristan A, Heartly MT (2017) An experimental study on performance and durability of hardened concrete using alccofine and copper slag. International Journal of ChemTech Research 10(8):507–516

    Google Scholar 

  26. Vikram KS, Banarase MA (2015) Experimental study on effect of alccofine on properties of concrete - A review. International Journal of Research in Engineering, Sceience and Technologies 1(8):297–301

    Google Scholar 

  27. Yatin H P, Patel PJ, Jignesh MP, Patel HS (2013) Study on durability of high performance concrete with alccofine and fly ash. International Journal of Advanced Engineering Research and Studies 2(3):154–157

    Google Scholar 

Download references

Acknowledgements

The authors wish to gratefully acknowledge the Counto Microfine Products Pvt. Ltd, Goa and Ambuja Cements Limited Mumbai for supplying the ultra fine slag used in this study.

Author information

Affiliations

Authors

Corresponding author

Correspondence to K. Thangapandi.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Thangapandi, K., Anuradha, R., Archana, N. et al. Experimental Study on Performance of Hardened Concrete Using Nano Materials. KSCE J Civ Eng 24, 596–602 (2020). https://doi.org/10.1007/s12205-020-0871-y

Download citation

Keywords

  • Durability
  • Nano Materials
  • Corrosion
  • Damage detection/Identification
  • Alccofine