Abstract
Based on the research of mix ratio and mechanical properties of glazed hollow bead thermal insulation concrete (GIC), the quasi-static tests of six GIC frame columns and one normal concrete (NC) frame column are carried out. The stress of frame columns under earthquake is simulated by applying a constant vertical load and cyclic horizontal load, and the hysteresis behavior, skeleton curve, ductility coefficient, stiffness degradation, and energy dissipation capacity of frame columns are studied. Contrast variables include axial compression ratio, stirrup reinforcement ratio and concrete material. The results show that the seismic performance of GIC frame columns is similar to that of ordinary concrete frame columns and frame columns. The stiffness degradation rate and ductility of GIC column are higher than that of NC column with the same parameter; higher axial compression ratio can increase the initial stiffness of GIC and reduce ductility; higher reinforcement ratio can increase ductility, but can limit plastic hinge development and reduce energy dissipation capacity of GIC column. The results can provide theoretical basis for elastic-plastic analysis of GIC column under earthquake action.
Similar content being viewed by others
References
ACI 318-89 (1990). Building code requirements for structural concrete, ACI 318-89, American Concrete Institute (ACI), Farmington Hills, USA.
Amran, Y. H. M., Farzadnia, N., and Ali, A. A. A. (2015). “Properties and applications of foamed concrete; A review.” Construction & Building Materials, Elsevier, Vol. 101, No. 1, pp. 990–1005, DOI: https://doi.org/10.1016/j.conbuildmat.2015.10.112.
Flores, J. E. A. and Li, Q. M. (2012). “Structural behaviour of composite sandwich panels with plain and fibre-reinforced foamed concrete cores and corrugated steel faces.” Composite Structures, Elsevier, Vol. 94, No. 5, pp. 1555–1563, DOI: https://doi.org/10.1016/j.compstruct.2011.12.017.
GB 50010-2010 (2010). Code for design of concrete structures, GB 50010-2010 China Academy of Building Research (CABR), Beijing, China (in Chinese).
Guo, Y. C., Zhang, J. H., Chen, G. M., and Xie, Z. H. (2014). “Compressive behaviour of concrete structures incorporating recycled concrete aggregates, rubber crumb and reinforced with steel fibre, subjected to elevated temperatures.” Journal of Cleaner Production, Elsevier, Vol.72, No.1, pp. 193–203, DOI: https://doi.org/10.1016/j.jclepro.2014.02.036.
Jiao, J. T., Ye, Y H., and Bo, D. (2003). “Bearing capacity analysis of reinforced concrete L-shaped cross-section under biaxial eccentric compression.” Progress in Natural Science: Materials International, Elsevier, Vol. 13, No. 6, pp. 429–433, DOI: https://doi.org/10.1080/10020070312331343800.
Kuska and Baum, S. S. (1994). “Seismic behavior of square high-strength concrete columns.” ACI Structural Journal, American Concrete Institute, Vol. 91, No. 3, pp. 336–3451, DOI: https://doi.org/10.1007/s12205-017-1414-z.
Liu, B. Q., Xu, Y. Z., and Bai, S. L. (1996). “Low-cyclic behavior of reinforced concrete column subjected to symmetric displacement cycling.” Journal of Chongqing University, Chongqing University, Vol. 18, No. 2, pp. 34–42 (in Chinese).
Liu, Y. Z., Zhang, Y., Wang, W. J., and Li, Z. (2015). “Mechanical properties of thermal insulation concrete with a high volume of glazed hollow beads.” Magazine of Concrete Research, Ice, Vol. 67, No. 13, pp. 1–14, DOI: https://doi.org/10.1680/macr.14.00296.
Narayanan, N. and Ramamurthy, K. (2000). “Structure and properties of aerated concrete: A review.” Cement & Concrete Composites, Elsevier, Vol. 22, No. 5, pp. 321–329, DOI: https://doi.org/10.1016/S0958-9465(00)00016-0.
Othuman, M. A. and Wang, Y. C. (2011). “Elevated-temperature thermal properties of lightweight foamed concrete.” Construction & Building Materials, Elsevier, Vol. 25, No. 2, pp. 705–716, DOI: https://doi.org/10.1016/j.conbuildmat.2010.07.016.
Rabbat, B. G., Daniel, J. I., Weinmann, T. L., and Hanson, N. W. (1982). “Seismic behavior of lightweight concrete columns” Final Report Construction Technology Labs., SKOKIE, IL.
Sayadi, A. A., Tapia, J. V., Neitzert, T. R., and Clifton, G. C. (2016). “Effects of expanded polystyrene (EPS) particles on fire resistance, thermal conductivity and compressive strength of foamed concrete.” Construction & Building Materials, Elsevier, Vol. 112, No. 1, pp. 716–724, DOI: https://doi.org/10.1016/j.conbuildmat.2016.02.218.
Shim, C., Koem, C., Song, H. H., and Park, S. (2017). “Seismic performance of repaired severely damaged precast columns with high-fiber reinforced cementitious composites.” KSCE Journal of Civil Engineering, KSCE, Vol. 4, No.1, pp. 1–11, DOI: https://doi.org/10.1007/s12205-017-1414-z.
Tang, Y. C., Li, L. J., Feng, W. X., Liu, F., and Liao, B. (2017). “Seismic performance of recycled aggregate concrete-filled steel tube columns.” Journal of Constructional Steel Research, Elsevier, Vol. 133, No. 1, pp. 112–124, DOI: https://doi.org/10.1016/j.jcsr.2017.02.006.
Wang, W. J., Zhao, L., Liu, Y. Z., and Li, Z. (2014). “Mechanical properties and stress-strain relationship in axial compression for concrete with added glazed hollow beads and construction waste.” Construction and Building Materials, Elsevier, Vol. 71, No. 1, pp. 425–434, DOI: https://doi.org/10.1016/j.conbuildmat.2014.05.005.
Wang, W. J., Zhao, L., Liu, Y. Z., and Li, Z. (2015). “Mix design for recycled aggregate thermal insulation concrete with mineral admixtures.” Magazine of Concrete Research, Ice, Vol. 66, No. 10, pp. 492–504, DOI: https://doi.org/10.1680/macr.13.00335.
Wei, C. M., Xu, L. H., Huang, L., Xu, H. R., and Deng, F. Q. (2014). “Experimental study on restoring force models for steel-polypropylene hybrid fiber reinforced concrete columns.” China Civil Engineering Journal, China Civil Engineering Society, Vol. 47, No. 1, pp. 227–234. (in Chinese).
Wu, T., Wei, H., and Liu, X. (2018). “Shear strength of interior beam-column joints with lightweight aggregate concrete.” Magazine of Concrete Research, Ice, Vol. 70, No. 3, pp. 109–128, DOI: https://doi.org/10.1680/jmacr.17.00083.
Xiao, Y., Wu, Y T., Shang, S. P., and Henry, W. Y. (2002). “Experimental and analytical studies on full-scale high-strength concrete columns.” Journal of Southeast University (National Science Edition), Southeast University, Vol. 32, No. 5, pp. 746–749. (in Chinese).
Xu, Z., Chen, Z., Osman, B. H., and Yang, S. (2018). “Seismic performance of high-strength lightweight foamed concrete-filled cold-formed steel shear walls.” Journal of Constructional Steel Research, Elsevier, Vol. 143, No. 1, pp. 148–161, DOI: https://doi.org/10.1016/j.jcsr.2017.12.027.
Acknowledgements
This work was supported by the National Natural Science Foundation of China (grant number 51708385, 51808375, 51678384); the “1331 project” Key Innovation Teams of Shanxi Province; and the Postdoctoral Research Foundation of China (grant number 2018M631775, 2018M633051, 2018M630946).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhang, Y., Ma, G., Du, S. et al. Hysteretic Behavior and Restoring Force Model of Reinforced Glazed Hollow Bead Insulation Concrete (GIC) Columns. KSCE J Civ Eng 23, 3049–3065 (2019). https://doi.org/10.1007/s12205-019-2089-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-019-2089-4