Models Reviewed for Predicting CFRP Shear Contribution of Strengthened Reinforced Concrete Box Beam
- 24 Downloads
Eight various models for calculating the FRP (fiber-reinforced polymer) contribution to shear from different codes and studies were reviewed and discussed. From all the models, it is found that the effective strain is the most important parameter which lies in all equations except JSCE model. Besides, the six models from guidelines and two from latest literature with different parameters were discussed and applied for calculating shear contribution of 181 FRP shear strengthening specimens collected from existing literature. It reveals that all ratios of calculation related to experimental results showed distributions around the bisector in all equations of models. From the values of total members, the predictions of FRP shear contribution of the beam with a T-section or rectangular section using two models (fib Bulletin 14 and Sayed et al.) were very close to the experimental values and also stood safe sides. Furthermore, one control and four strengthened reinforced concrete (RC) box beam by carbon fiber-reinforced polymer (CFRP) were tested for shear strength. Compared with the experimental results, all theoretical values predicted by the reviewed models overestimated the FRP shear contribution of strengthened members, because the effective strain was overestimated. A coefficient of 1.31, therefore, was also proposed, which divided the formula of the effective strain in the fib Bulletin 14 model according to the experimental effective strain in fiber. The model with the modified effective strain presented a rational prediction in CFRP shear contribution of strengthened RC box beams.
Keywordsbox beam reinforced concrete strengthened shear carbon-fiber-reinforced polymer (CFRP) reviewed
Unable to display preview. Download preview PDF.
The authors acknowledge Research Universiti Grant 1001/PAWAM/814215 provided by Assc. Professor N. Muhamad Bunnori Grant Scheme from Universiti Sains Malaysia (USM) and the Special Funds (CHD300102219525) for Fundamental Scientific Research Business Expenses of Central Universities.
- Adhikary, B. B. and Mutsuyoshi, H. (2004). “Behavior of concrete beams strengthened in shear with carbon-fiber sheets.” Journal of Composites for Construction, Vol. 8, No. 3, pp. 258–264, DOI: https://doi.org/10.1061/(ASCE)1090-0268(2004)8:3(258).CrossRefGoogle Scholar
- Adhikary, B. B., Mutsuyoshi, H., and Ashraf, M. (2004). “Shear strengthening of reinforced concrete beams using fiber-reinforced polymer sheets with bonded anchorage.” ACI Structural Journal, Vol. 101, No. 5, pp. 660–668.Google Scholar
- Altin, S., Anil, O., Kopraman, Y., Mertoglu, C., and Kara, M. E. (2010). “Improving shear capacity and ductility of shear-deficient RC beams using CFRP strips.” Journal of Reinforced Plastics and Composites, Vol. 29, No. 19, pp. 2975–2991, DOI: https://doi.org/10.1177/0731684410363182.CrossRefGoogle Scholar
- ACI (2008). Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. Reported by ACI 440.2R-02, American Concrete Institute, FarmingtonHills, MI, USA.Google Scholar
- Al-Sulaimani, G J., Sharif, A., Basunbul, I. A., Baluch, M. H., and Ghaleb, B. N. (1994). “Shear repair for reinforced concrete by fiberglass plate bonding.” ACI Structural Journal, Vol. 91, No. 4, pp. 458–464.Google Scholar
- Bae, S. and Belarbi, A. (2012). “Behavior of various anchorage systems used for shear strengthening of concrete structures with externally bonded FRP sheets.” Journal of Bridge Engineering, Vol. 18, No. 9, pp. 837–847, DOI: https://doi.org/10.1061/(ASCE)BE.1943-5592.0000420.CrossRefGoogle Scholar
- Beber, A. and Campos Filho, A. (2005). “CFRP composites on the shear strengthening of reinforced concrete beams.” Revista IBRACON de Estruturas, Vol. 1, No. 2, pp. 127–143.Google Scholar
- British Concrete Society (2000). Design guidance for strengthening concrete structures using fibre composite materials. Technical Report, No. 55, British Concrete Society, Berkshire, UK.Google Scholar
- Carolin, A. and Täljsten, B. (2005). “Theoretical study of strengthening for increased shear bearing capacity.” Journal of Composites for Construction, Vol. 9, No. 6, pp. 497–506, DOI: https://doi.org/10.1061/(ASCE)1090-0268(2005)9:6(497).CrossRefGoogle Scholar
- CECS (2003). Technical Specification for Strengthening Concrete Structure with Carbon Fiber Reinforced Polymer Laminate, CECS 146, China Association for Engineering Construction Standardization, China Planning Press, Beijing, China.Google Scholar
- Chaallal, O., Nollet, M.-J., and Perraton, D. (1998). “Strengthening of reinforced concrete beams with externally bonded fiber-reinforced-plastic plates: Design guidelines for shear and flexure.” Canadian Journal of Civil Engineering, Vol. 25, No. 4, pp. 692–704, DOI: https://doi.org/10.1139/l98-008.CrossRefGoogle Scholar
- Deniaud, C. and Cheng, J. R. (2001). “Shear behavior of reinforced concrete T-beams with externally bonded fiber-reinforced polymer sheets.” ACI Structural Journal, Vol. 98, No. 3, pp. 386–394.Google Scholar
- fib (2001). Externally bonded FRP reinforcement for RC structures. Technical Report fib Bulletin No. 14, Lausanne, France.Google Scholar
- Godat, A., Qu, Z., Lu, X., Labossiere, P., Ye, L., and Neale, K. W. (2010). “Size effects for reinforced concrete beams strengthened in shear with CFRP strips.” Journal of Composites for Construction, Vol. 14, No. 3, pp. 260–271, DOI: https://doi.org/10.1061/(aSCE)CC.1943-5614.0000072.CrossRefGoogle Scholar
- ISIS (2008). FRP rehabilitation of reinforced concrete structures. ISIS Design Manual 4, The Canadian Network of Centres of Excellence on Intelligent Sensing for Innovative Structures (ISIS). Winnipeg, Manitoba, Canada.Google Scholar
- JSCE (2001). Recommendations for upgrading of concrete structures with use of continuous fiber sheet, JSCE Series 41, Japan Society of Civil Engineers Concrete Engineering, Tokyo, Japan.Google Scholar
- Khalifa, A., Gold, W. J., Nanni, A., and Mi, A. A. (1998). “Contribution of externally bonded FRP to shear capacity of RC flexural members.” Journal of Composites for Construction, Vol. 2, No. 4, pp. 195–202, DOI: https://doi.org/10.1061/(ASCE)1090-0268(1998)2:4(195).CrossRefGoogle Scholar
- Ma, S., Muhamad Bunnori, N., and Choong, K. K. (2018). “Prediction of Ultimate torque of reinforced concrete box beam bonded with CFRP strips.” KSCE Journal of Civil Engineering, DOI: https://doi.org/10.1007/s12205-018-0872-2.
- Maalej, M. and Leong, K. S. (2005). “Effect of beam size and FRP thickness on interfacial shear stress concentration and failure mode of FRP-strengthened beams.” Composites Science and Technology, Vol. 65, Nos. 7–8, pp. 1148–1158, DOI: https://doi.org/10.1016/j.compscitech.2004.11.010.CrossRefGoogle Scholar
- Mofidi, A. and Chaallal, O. (2011a). “Shear strengthening of RC beams with EB FRP: Influencing factors and conceptual debonding model.” Journal of Composites for Construction, Vol. 15, No. 1, pp. 62–74, DOI: https://doi.org/10.1061/(ASCE)CC.1943-5614.0000153.CrossRefGoogle Scholar
- Mofidi, A. and Chaallal, O. (2011b). “Shear strengthening of RC Beams with externally bonded FRP composites: Effect of Strip-Width-to-Strip-Spacing ratio.” Journal of Composites for Construction, Vol. 15, No. 5, pp. 732–742, DOI: https://doi.org/10.1061/(ASCE)CC.1943-5614.0000219.CrossRefGoogle Scholar
- Moy, S. (2013). “Advance fiber-reinforced polymer (FRP) composites for civil engineering applications.” Developments in fiber-reinforced polymer (FRP) composites for civil engineering, Woohead Publishing Ltd., Cambridge, UK, pp. 177–204, DOI: https://doi.org/10.1533/9780857098955.2.177.CrossRefGoogle Scholar
- Oday, A. S., Li, Y., Houssam, M. A., A’ssim, A.-J., Ayad, T. S., and Wang, L. (2009). “Design standards comparison of reinforced concrete strengthening using FRP composite in Chinese and ACI codes.” Computational Structural Engineering Springer, pp. 1197–1205, DOI: https://doi.org/10.1007/978-90-481-2822-8_135.CrossRefGoogle Scholar
- Pellegrino, C. and Modena, C. (2002). “Fiber reinforced polymer shear strengthening of reinforced concrete beams with transverse steel reinforcement.” Journal of Composites for Construction, Vol. 6, No. 2, pp. 104–111, DOI: https://doi.org/10.1061/(ASCE)1090-0268(2002)6:2(104).CrossRefGoogle Scholar
- Pellegrino, C. and Vasic, M. (2013). “Assessment of design procedures for the use of externally bonded FRP composites in shear strengthening of reinforced concrete beams.” Composites Part B: Engineering, Vol. 45, No. 1, pp. 727–741, DOI: https://doi.org/10.1016/j.compositesb.2012.07.039.CrossRefGoogle Scholar
- Raghu, A., Myers, J. J., and Nanni, A. (2000). “An assessment of in-situ FRP shear and flexural strengthening of reinforced concrete joists.” Advanced Technology in Structural Engineering, Structures Congress 2000, pp. 1–14, DOI: https://doi.org/10.1061/40492(2000)177.
- Sas, G., Täljsten, B., Barros, J., Lima, J., and Carolin, A. (2009). “Are available models reliable for predicting the FRP contribution to the shear resistance of RC beams?.” Journal of Composites for Construction, Vol. 13, No. 6, pp. 514–534, DOI: https://doi.org/10.1061/(ASCE)CC.1943-5614.0000045.CrossRefGoogle Scholar
- Sayed, A. M., Wang, X., and Wu, Z. (2013). “Modeling of shear capacity of RC beams strengthened with FRP sheets based on FE simulation.” Journal of Composites for Construction, Vol. 17, No. 5, pp. 687–701, DOI: https://doi.org/10.1061/(ASCE)CC.1943-5614.0000382.CrossRefGoogle Scholar
- Sayed, A., Wang, X., and Wu, Z. (2013). “Modeling of shear capacity of RC beams strengthened with FRP Sheets based on FE simulation.” Journal of Composites for Construction, Vol. 17, No. 5, pp. 687–701, DOI: https://doi.org/10.1061/(ASCE)CC.1943-5614.0000382.CrossRefGoogle Scholar
- Sayed, A. M., Wang, X., and Wu, Z. (2014). “Finite element modeling of the shear capacity of RC beams strengthened with FRP sheets by considering different failure modes.” Construction and Building Materials, Vol. 59, pp. 169–179, DOI: https://doi.org/10.1016/j.conbuildmat.2014.02.044.CrossRefGoogle Scholar
- Triantafillou, T. C. (1998). “Shear strengthening of reinforced concrete beams using epoxy-bonded FRP composites.” ACI Structural Journal, Vol. 95, No. 2, pp. 107–115.Google Scholar
- Triantafillou, T. C. and Antonopoulos, C. P. (2000). “Design of concrete flexural members strengthened in shear with FRP.” Journal of Composites for Construction, Vol. 4, No. 4, pp. 198–205, DOI: https://doi.org/10.1061/(ASCE)1090-0268(2000)4:4(198).CrossRefGoogle Scholar
- Ye, L., Lu, X., and Chen, J. (2005). “Design proposals for the debonding strengths of FRP strengthened RC beams in the Chinese design code.” Proc. International Symposium on Bond Behavior of FRP in Structures, Hong Kong, China, pp. 45–54.Google Scholar
- Zhang, Z. and Hsu, C.-T. T. (2005). “Shear strengthening of reinforced concrete beams using carbon-fiber-reinforced polymer laminates.” Journal of composites for construction, Vol. 9, No. 2, pp. 158–169, DOI: https://doi.org/10.1061/(ASCE)1090-0268(2005)9:2(158).CrossRefGoogle Scholar
- Zhang, Z., Hsu, C.-T. T., and Moren, J. (2004). “Shear strengthening of reinforced concrete deep beams using carbon fiber reinforced polymer laminates.” Journal of Composites for Construction, Vol. 8, No. 5, pp. 403–414, DOI: https://doi.org/10.1061/(ASCE)1090-0268(2004)8:5(403).CrossRefGoogle Scholar