Abstract
In this paper, the invasive behavior of chloride ion has been investigated under the coupling action of wetting-drying cycles and flexural load on recycled aggregate concrete (RAC) beams in sodium chloride solution. The permeation properties of chloride in RAC were studied by analyzing the content, binding capacity and diffusion coefficient of chloride. The priority of interfacial transition zone (ITZ) for chloride transport in RAC was analyzed by energy dispersive spectrometer (EDS). Additionally, the distribution of chloride content in concrete was predicted. The results indicated that the micro-pore structure, initial damage and micro-cracks provide more paths for the diffusion of chloride in the RAC. The binding capacity of chloride diminished with the incorporation of recycled coarse aggregate (RCA) and the exertion of flexural load, which increased the chloride diffusion coefficient. The correctness of Fick’s second diffusion law was verified via applying it to the data processing. Furthermore, the convection and diffusion zones had the significant influence on the distribution of chloride.
Similar content being viewed by others
References
Alexandridou, C., Angelopoulos, G. N., and Coutelieris, F. A. (2018). “Mechanical and durability performance of concrete produced with recycled aggregates from Greek construction and demolition waste plants.” Journal of Cleaner Production, Vol. 176, pp. 745–757, DOI: https://doi.org/10.1016/j.jclepro.2017.12.081.
Climent, M. A., Vera, G. D., López, J. F., Viqueira, E., and Andrade, C. (2002). “A test method for measuring chloride diffusion coefficients through nonsaturated concrete: Part I. The instantaneous plane source diffusion case.” Cement and Concrete Research, Vol. 32, No. 7, pp. 1113–1123, DOI: https://doi.org/10.1016/s0008-8846(02)00750-0.
Evangelista, L. and Brito, J. D. (2017). “Flexural behaviour of reinforced concrete beams made with fine recycled concrete aggregates.” KSCE Journal of Civil Engineering, KSCE, Vol. 21, No. 1, pp. 353–363, DOI: https://doi.org/10.1007/s12205-016-0653-8.
Guo, H., Shi, C., Guan, X., Zhu, J., Ding, Y., Ling, T. C., Zhang, H., and Wang, Y. (2018). “Durability of recycled aggregate concrete — A review.” Cement and Concrete Composites, Vol. 89, pp. 251–259, DOI: https://doi.org/10.1016/j.cemconcomp.2018.03.008.
Han, S., Li, Q., Yue, G., Mo, J., and Wang, X. (2015). “Influence of quality and substitution rate of recycled coarse aggregate on coefficient of the chloride migration of recycled concrete.” Concrete, No. 12, pp. 80–83 (in Chinese), DOI: https://doi.org/10.3969/j.issn.1002-3550.2015.12.021.
Hussain, R. R. and Ishida, T. (2010). “Development of numerical model for FEM computation of oxygen transport through porous media coupled with micro-cell corrosion model of steel in concrete structures.” Computers and Structures, Vol. 88, Nos. 9–10, pp. 639–647, DOI: https://doi.org/10.1016/j.compstruc.2010.02.008.
Hwang, J. P., Shim, H. B., Lim, S., and Ann, K. Y. (2013). “Enhancing the durability properties of concrete containing recycled aggregate by the use of pozzolanic materials.” KSCE Journal of Civil Engineering, KSCE, Vol. 17, No. 1, pp. 155–163, DOI: https://doi.org/10.1007/s12205-013-1245-5.
Lai, J., Wang, X., Qiu, J., Chen, J., Hu, Z., and Wang, H. (2018) “Extreme deformation characteristics and countermeasures for a tunnel in difficult grounds in southern Shaanxi, China.” Environmental Earth Sciences, Vol. 77, pp. 1–14, DOI: https://doi.org/10.1007/s12665-018-7888-2.
Mohammed, T. U. and Hamada, H. (2003). “Relationship between free chloride and total chloride contents in concrete.” Cement and Concrete Research Vol. 33, No. 9, pp. 1487–1490, DOI: https://doi.org/10.1016/S0008-8846(03)00065-6.
Moon, D. J. and Moon, H. Y. (2002). “Effect of pore size distribution on the qualities of recycled aggregate concrete.” KSCE Journal of Civil Engineering, KSCE, Vol. 6, No. 3, pp. 289–295, DOI: https://doi.org/10.1007/bf02829151.
Ogirigbo, O. R. and Black, L. (2017). “Chloride binding and diffusion in slag blends: Influence of slag composition and temperature.” Construction and Building Materials, Vol. 149, pp. 816–825, DOI: https://doi.org/10.1016/j.conbuildmat.2017.05.184.
Peng, G., Zhang, J., Wang, J., and Liu, Q. (2013). “Influence of defects in recycled aggregate on mechanical properties and permeability of recycled aggregate concrete.” Construction Technology, Vol. 42, No. 10, pp. 51–54 (in Chinese), DOI: https://doi.org/10.7672/sgjs2013100051.
Qiu, J., Qin, Y., Feng, Z., Wang L., and Wang, K. (2019). “Safety risks and protection measures for the city wall during the construction and operation of Xi’an Metro.” J. Perform. Constr. Fac., Vol. 33, No. 5, p. 12, DOI: https://doi.org/10.1061/(ASCE)CF.1943-5509.0001374.
Rahal, K. N. and Alrefaei, Y. T. (2017). “Shear strength of longitudinally reinforced recycled aggregate concrete beams.” Engineering Structures, Vol. 145, pp. 273–282, DOI: https://doi.org/10.1016/j.engstruct.2017.05.028.
Real, S., Bogas, J. A., and Ferrer, B. (2017). “Service life of reinforced structural lightweight aggregate concrete under chloride-induced corrosion.” Materials and Structures, Vol. 50, No. 2, pp. 101, DOI: 101.10.1617/s11527-016-0971-9.
Srubar III, W. V. (2015). “Stochastic service-life modeling of chloride-induced corrosion in recycled-aggregate concrete.” Cement and Concrete Composites, No. 55, pp. 103–111, DOI: https://doi.org/10.1016/j.cemconcomp.2014.09.003.
Tan, H. and Yang, Y. (2016). “Influence of the interfacial transition zone on anti chloride ion permeability of recycled concrete.” Highway Engineering, Vol. 41, No. 1, pp. 70–74, (in Chinese), DOI: https://doi.org/10.3969/j.issn.1674-0610.2016.01.015.
Thomas, C., Sosa, I., Setién, J., Polanco, J. A., and Cimentada, A. I. (2014). “Evaluation of the fatigue behavior of recycled aggregate concrete.” Journal of Cleaner Production, Vol. 65, pp. 397–405, DOI: https://doi.org/10.1016/j.jclepro.2013.09.036.
Vera, G. D., Climent, M. A., Viqueira, E., Antón, C., and Andrade, C. (2007). “A test method for measuring chloride diffusion coefficients through partially saturated concrete. Part II: The instantaneous plane source diffusion case with chloride binding consideration.” Cement and Concrete Research, Vol. 37, No. 5, pp. 714–724, DOI: https://doi.org/10.1016/j.cemconres.2007.01.008.
Wang, Y., Shui, Z., Yu, R., and Huang, Y. (2018). “Chloride ingress and binding of coral waste filler-coral waste sand marine mortar incorporating metakaolin.” Construction and Building Materials, Vol. 190, pp. 1069–1080, DOI: https://doi.org/10.1016/j.conbuildmat.2018.09.189.
Wang, W., Wu, J., Wang, Z., Wu, G., and Yue, A. (2016). “Chloride diffusion coefficient of recycled aggregate concrete under compressive loading.” Materials and Structures, Vol. 49, No. 11, pp. 4729–4736, DOI: https://doi.org/10.1617/s11527-016-0820-x.
Wu, Y. C. and Xiao, J. (2018). “The effect of microscopic cracks on chloride diffusivity of recycled aggregate concrete.” Construction and Building Materials, Vol. 170, pp. 326–346, DOI: https://doi.org/10.1016/j.conbuildmat.2018.03.045.
Xiao, J., Li, W., Fan, Y., and Huang, X. (2012). “An overview of study on recycled aggregate concrete in China (1996–2011).” Construction and Building Materials, Vol. 31, pp. 364–383, DOI: https://doi.org/10.1016/j.conbuildmat.2011.12.074.
Xiao, J., Ying, J., and Shen, L. (2012). “FEM simulation of chloride diffusion in modeled recycled aggregate concrete.” Construction and Building Materials, Vol. 29, pp. 12–23, DOI: https://doi.org/10.1016/j.conbuildmat.2011.08.073.
Xiao, J., Ying, J., Tam, V. W. Y., and Gilbert, I. R. (2014). “Test and prediction of chloride diffusion in recycled aggregate concrete.” Science China-Technological Sciences, Vol. 57, No. 12, pp. 2357–2370, DOI: https://doi.org/10.1007/s11431-014-5700-4.
Yehia, S., Helal, K., Abusharkh, A., Zaher, A., and Istaitiyeh, H. (2015). “Strength and durability evaluation of recycled aggregate concrete.” International Journal of Concrete Structures and Materials, Vol. 9, No. 2, pp. 219–239, DOI: https://doi.org/10.1007/s40069-015-0100-0.
Ying, J., Xiao, J., and Meng, Q. (2016). “On probability distribution of chloride diffusion coefficient for recycled aggregate concrete.” International Journal of Concrete Structures and Materials, Vol. 10, No. 1, pp. 1–13, DOI: https://doi.org/10.1007/s40069-015-0123-6.
Ying, J., Xiao, J., Shen, L., and Bradford, M. A. (2013). “Five-phase composite sphere model for chloride diffusivity prediction of recycled aggregate concrete.” Magazine of Concrete Research, Vol. 9, No. 65, pp. 573–588, DOI: https://doi.org/10.1680/macr.12.00180.
Zhang, H. and Zhao, Y. (2015). “Integrated interface parameters of recycled aggregate concrete.” Construction and Building Materials, Vol. 101, pp. 861–877, DOI: https://doi.org/10.1016/j.conbuildmat.2015.10.084.
Acknowledgements
This study was financially supported by the National Natural Science Foundation of China (Grant No. 51878546), Innovative Talent Promotion Plan of Shaanxi Province (2018KJXX-056) and Key Research and Development Projects of Shaanxi Province (2018ZDCXL-SF-03-03-02). Their supports are gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Bai, G., Zhu, C., Liu, C. et al. Chloride Ion Invasive Behavior of Recycled Aggregate Concrete under Coupling Flexural Loading and Wetting-Drying Cycles. KSCE J Civ Eng 23, 4454–4462 (2019). https://doi.org/10.1007/s12205-019-0295-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-019-0295-8