Abstract
With the advent of wireless sensing technology and interest in tracking resources, researchers have developed advanced tracking algorithms by using one or more sensor systems for improved accuracy and reliability of tracking. The objective of this research lies in another aspect−deployment−of tracking that has received only little attention until now. The research explores a method for sensor deployment particularly designed for the building in which the sensors are used. To tailor our solution to a specific building, we integrate a building information model with an electromagnetic energy analysis. By using such a model, the system extracts the properties of building materials, which are used as parameters of sensor deployment optimization. Then, we find a method of optimizing the deployment of a Received Signal Strength Indication (RSSI)-based tracking sensors for reducing wireless energy dissipation during the operation of the tracking system. For the numerical validation of the proposed method, the High-Frequency Structural Simulator (HFSS) runs an electromagnetic simulation to generate comparison data of electromagnetic energy flow from optimized sensor deployment and random sensor deployment. The results indicate that the proposed method could produce results that are correlated to the HFSS results. In addition, the method shows clear evidence of a reduction in signal power loss. Finally, optimized sensor deployment through the proposed framework can use signals of electromagnetic energy more effectively and potentially improve the efficiency of the RSSI-based tracking system.
Similar content being viewed by others
References
Cai, H., Andoh, A. R., Su, X., and Li, S. (2014). “A boundary condition based algorithm for locating construction site objects using RFID and GPS.” Advanced Engineering Informatics, Elsevier Ltd, vol. 28, no. 4, pp. 455–468. DOI: 10.1016/j.aei.2014.07.002.
Carbonari, A., Giretti, A., and Naticchia, B. (2011). “A proactive system for real-time safety management in construction sites.” Automation in Construction, Elsevier B.V., vol. 20, no. 6, pp. 686–698. DOI: 10.1016/j.autcon.2011.04.019.
Chintalapudi, K., Padmanabha Iyer, A., and Padmanabhan, V. N. (2010). “Indoor localization without the pain.” Proc. 16th Annual Int. Conf. on Mobile Computing and Networking, The Association for Computing Machinery (ACM), Chicago, Illinois, USA, pp. 173–184.
Cho, C., Park, J., and Kim, K. (2018). “Energy loss in cement-based material for efficient sensor deployment at a site.” Canadian Journal of Civil Engineering, DOI: 10.1139/cjce-2017-0406.
Costin, A. M. and Teizer, J. (2015). “Fusing passive RFID and BIM for increased accuracy in indoor localization.” Visualization in Engineering, Springer Nature, vol. 3, no. 1, pp. 1–20. DOI: 10.1186/s40327-015-0030-6.
Domingo-Perez, F., Lazaro-Galilea, J. L., Wieser, A., Martin-Gorostiza, E., Salido-Monzu, D., and Llana, A. D. L. (2016). “Sensor placement determination for range-difference positioning using evolutionary multi-objective optimization.” Expert Systems with Applications, Elsevier Ltd, vol. 47, pp. 95–105. DOI: 10.1016/j.eswa.2015.11.008.
Escorcia, V., Dávila, M. A., Golparvar-Fard, M., and Niebles, J. C. (2012). “Automated vision-based recognition of construction worker actions for building interior construction operations using RGBD Cameras.” Proc. Construction Research Congress 2012, ASCE, West Lafayette, Indiana, United States, pp. 879–888.
Friis, H. T. (1946). “A note on a simple transmission formula.” Proc. of the IRE, IEEE, New York, USA, United States, vol. 34, no. 5, pp. 254–256.
Golparvar-Fard, M., Bohn, J., Teizer, J., Savarese, S., and Peña-Mora, F. (2011). “Evaluation of image-based modeling and laser scanning accuracy for emerging automated performance monitoring techniques.” Automation in Construction, Elsevier B.V., vol. 20, no. 8, pp. 1143–1155. DOI: 10.1016/j.autcon.2011.04.016.
Kim, H., Lee, H.-S., Park, M., Chung, B., and Hwang, S. (2016). “Automated hazardous area identification using laborers’ actual and optimal routes.” Automation in Construction, Elsevier B.V., vol. 65, pp. 21–32. DOI: 10.1016/j.autcon.2016.01.006.
Kozlov, M. and Turner, R. (2010). “A comparison of ansoft HFSS and CST microwave studio simulation software for multi-channel coil design and SAR estimation at 7T MRI.” PIERS Online, vol. 6, no. 4, pp. 395–399. DOI: 10.2529/PIERS090902092851.
Li, N. and Becerik-Gerber, B. (2011). “Performance-based evaluation of RFID-based indoor location sensing solutions for the built environment.” Advanced Engineering Informatics, Elsevier Ltd, vol. 25, no. 3, pp. 535–546. DOI: 10.1016/j.aei.2011.02.004.
Li, N., Becerik-Gerber, B., Krishnamachari, B., and Soibelman, L. (2014a). “A BIM centered indoor localization algorithm to support building fire emergency response operations.” Automation in Construction, Elsevier B.V., vol. 42, pp. 78–89. DOI: 10.1016/j.autcon.2014.02.019.
Li, N., Becerik-Gerber, B., and Soibelman, L. (2014b). “Iterative maximum likelihood estimation algorithm: Leveraging building information and sensing infrastructure for localization during emergencies.” Journal of Computing in Civil Engineering, ASCE, vol. 29, no. 6, pp. 4014094, DOI: 10.1061/(ASCE)CP.1943-5487.0000430.
Li, H., Chan, G., Wong, J. K. W., and Skitmore, M. (2016a). “Real-time locating systems applications in construction.” Automation in Construction, Elsevier B.V., vol. 63, pp. 37–47. DOI: 10.1016/j.autcon.2015.12.001.
Li, H., Yang, X., Wang, F., Rose, T., Chan, G., and Dong, S. (2016b). “Stochastic state sequence model to predict construction site safety states through Real-Time Location Systems.” Safety Science, Elsevier, vol. 84, pp. 78–87. DOI: 10.1016/j.ssci.2015.11.025.
Marks, E. and Teizer, J. (2012). “Safety first: real-time proactive equipment operator and ground worker warning and alert system in steel manufacturing.” Iron and Steel Technology, AIST, vol. 9, no. 10, pp. 56–69.
Mirotznik, M. S. and Prather, D. (1997). “How to choose electromagnetic software.” IEEE Spectrum, vol. 34, no. 12, pp. 53–58. DOI: 10.1109/6.642969.
Montaser, A. and Moselhi, O. (2014). “RFID indoor location identification for construction projects.” Automation in Construction, Elsevier B.V., vol. 39, pp. 167–179. DOI: 10.1016/j.autcon.2013.06.012.
Moreno-Salinas, D., Pascoal, A. M., and Aranda, J. (2013). “Optimal sensor placement for multiple target positioning with range-only measurements in two-dimensional scenarios.” Sensors, vol. 13, no. 8, pp. 10674–10710, DOI: 10.3390/s130810674.
Nguyen, N. H. and Dogancay, K. (2015). “Optimal sensor placement for Doppler shift target localization.” 2015 IEEE Radar Conference (RadarCon), IEEE, Arlington, VA, USA, pp. 1677–1682.
Park, J., Chen, J., and Cho, Y. K. (2017a). “Self-corrective knowledgebased hybrid tracking system using BIM and multimodal sensors.” Advanced Engineering Informatics, Elsevier B.V., vol. 32, pp. 126–138. DOI: 10.1016/j.aei.2017.02.001.
Park, J. and Cho, Y. K. (2017). “Development and evaluation of a probabilistic local search algorithm for complex dynamic indoor construction sites.” Journal of Computing in Civil Engineering, ASCE, vol. 31, no. 4, pp. 04017015, DOI: 10.1061/(ASCE)CP.1943-5487.0000658.
Park, J., Cho, Y. K., and Martinez, D. (2016). “A BIM and UWB integrated mobile robot navigation system for indoor position tracking applications.” Journal of Construction Engineering and Project Management, vol. 6, no. 2, pp. 30–39. DOI: 10.6106/JCEPM.2016.6.2.030.
Park, C.-S. and Kim, H.-J. (2013). “A framework for construction safety management and visualization system.” Automation in Construction, Elsevier B. V., vol. 33, pp. 95–103. DOI: 10.1016/j.autcon.2012.09.012.
Park, J., Kim, K., and Cho, Y. K. (2016b). “Using BIM Geometric Properties for BLE-based Indoor Location Tracking.” Seoul International Conference on Applied Science and Engineering, Seoul.
Park, M.-W., Makhmalbaf, A., and Brilakis, I. (2011). “Comparative study of vision tracking methods for tracking of construction site resources.” Automation in Construction, Elsevier B. V., vol. 20, no. 7, pp. 905–915. DOI: 10.1016/j.autcon.2011.03.007.
Park, J., Marks, E., Cho, Y. K., and Suryanto, W. (2015). “Performance Test of wireless technologies for personnel and equipment proximity sensing in work zones.” Journal of Construction Engineering and Management, ASCE, vol. 142, no. 1, pp. 04015049, DOI: 10.1061/(ASCE)CO.1943-7862.0001031.
Park, J., Yang, X., Cho, Y. K., and Seo, J. (2017b). “Improving dynamic proximity sensing and processing for smart work-zone safety.” Automation in Construction, Elsevier B.V., vol. 84, pp. 111–120. DOI: 10.1016/j.autcon.2017.08.025.
Poynting, J. H. (1884). “On the transfer of energy in the electromagnetic field.” Philosophical Transactions of the Royal Society of London, Royal Society, vol. 175, pp. 343–361.
Pozar, D. M. (2009). Microwave engineering. John Wiley & Sons, New York, USA.
Pradhananga, N. and Teizer, J. (2013). “Automatic spatio-temporal analysis of construction site equipment operations using GPS data.” Automation in Construction, Elsevier B.V., vol. 29, pp. 107–122. DOI: 10.1016/j.autcon.2012.09.004.
Shahi, A., Aryan, A., West, J. S., Haas, C. T., and Haas, R. C. G. (2012). “Deterioration of UWB positioning during construction.” Automation in Construction, Elsevier B.V., vol. 24, pp. 72–80. DOI: 10.1016/j.autcon.2012.02.009.
Su, X., Li, S., Yuan, C., Cai, H., and Kamat, V. R. (2014). “Enhanced boundary condition–Based approach for construction location sensing using RFID and RTK GPS.” Journal of Construction Engineering and Management, ASCE, Vol. 140, No. 10, p. 04014048, DOI: 10.1061/(ASCE)CO.1943-7862.0000889.
Taneja, S., Akinci, B., Garrett, J. H., Soibelman, L., and Karimi, H. A. (2016a). “Effects of positioning data quality and navigation models on map-matching of indoor positioning data.” Journal of Computing in Civil Engineering, ASCE, Vol. 30, No. 1, p. 04014113, DOI: 10.1061/(ASCE)CP.1943-5487.0000439.
Taneja, S., Akinci, B., Garrett, J. H., and Soibelman, L. (2016b). “Algorithms for automated generation of navigation models from building information models to support indoor map-matching.” Automation in Construction, Elsevier B.V., vol. 61, pp. 24–41. DOI: 10.1016/j.autcon.2015.09.010.
Torrent, D. G. and Caldas, C. H. (2009). “Methodology for automating the identification and localization of construction components on industrial projects.” Journal of Computing in Civil Engineering, ASCE, vol. 23, no. 1, pp. 3–13. DOI: 10.1061/(ASCE)0887-3801(2009)23:1(3).
Wang, L. C. (2008). “Enhancing construction quality inspection and management using RFID technology.” Automation in Construction, Elsevier B.V., vol. 17, no. 4, pp. 467–479, DOI: 10.1016/j.autcon. 2007.08.005.
Wang, J. and Razavi, S. (2016). “Two 4d models effective in reducing false alarms for struck-by-equipment hazard prevention.” Journal of Computing in Civil Engineering, ASCE, Vol. 30, No. 6, p. 04016031, DOI: 10.1061/(ASCE)CP.1943-5487.0000589.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cho, C., Park, J. & Kim, K. Automated and Optimized Sensor Deployment using Building Models and Electromagnetic Simulation. KSCE J Civ Eng 22, 4739–4749 (2018). https://doi.org/10.1007/s12205-018-1150-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-018-1150-z