Advertisement

Analytical Solution for Horizontal Tension of Main Cable in Erection of Stiffening Girder

  • Cuijuan Li
  • Huawen Ye
  • Maolin Tang
  • Xiaomin Yuan
Structural Engineering
  • 12 Downloads

Abstract

The horizontal tension of main cable is a key parameter to guarantee the safety of tower, form gravity stiffness and keep main cable shape correct during erection of stiffening girders. Instead of complicated Finite Element Modeling and iterative algorithms, simply analytical solutions of horizontal tension of main cable were deduced for two classical erection methods of stiffening girder based on the mathematical analogue and work-energy principle. Numerical method was also adopted to verify the analytical solutions on analysis of a single span suspension bridge. The results from analytical solution are found to be in good agreement with the numerical results. The theoretical results show that the presented analytical solutions can be easily applied in the calculation of the horizontal tension of main cable in any erection stage.

Keywords

suspension bridge erecting stiffening girders main cable horizontal tension work-energy principle mathematical analogue 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Adnur, S., Gunaydin, M., Altunisik, A. C., and Serim, B. (2012). “Construction stage analysis of Humber suspension bridge.” Applied Mathematical Modelling, Vol. 36, No. 11, pp. 5492–5505, DOI: 10.1016/j.apm.2012.01.011CrossRefGoogle Scholar
  2. An, X. W., Gosling, P. D., and Zhou, X. Y. (2016). “Analytical structural reliability analysis of a suspended cable.” Structural Safety, Vol. 58, pp. 20–30, DOI: 10.1016/j.strusafe.2015.08.001.CrossRefGoogle Scholar
  3. Chai, S. B., Xiao, R. C., and Sun, B. (2012). “Deformation characteristics of main cable in suspension bridge caused by live load.” Journal of Tongji University (Natural Science), Vol. 40, No. 10, pp. 1452–1457, DOI: 10.3969/j.issn.0253-374x.2012.10.003.Google Scholar
  4. Choi, D. H., Gwon, S. G., and Na, H. S. (2014). “Simplified analysis for preliminary design of towers in suspension bridge.” Journal of Bridge Engineering, Vol. 19, No. 3, pp. 1–12, DOI: 10.1061/(ASCE) BE.1943-5592.0000551.CrossRefGoogle Scholar
  5. Gimsing, N. J. and Georgakis, C. T. (2011). Cable supported bridges: Concept and design, John Wiley &Sons, New York, NY, USA.CrossRefGoogle Scholar
  6. Irvine, H. M. (1981). Cable structures, The MIT Press, Cambridge, Massachusetts, USA.Google Scholar
  7. Jennings, A. (1983). “Gravity stiffness of classical suspension bridges.” Journal of Structural Engineering, Vol. 109, No. 1, pp. 16–36, ISSN: 0733-9445/83/0001-0016/CrossRefGoogle Scholar
  8. Krishna, P. (1978). Cable suspended roofs, McGraw-Hill Book Company, New York, NY, USA.Google Scholar
  9. Luo, X. H. (2004). “Numerical analysis method for cable system of suspension bridges.” Journal of Tongji University, Vol. 32, No. 2, pp. 441–446.Google Scholar
  10. Liu, Z. and Liu, H. J. (2009). “New arithmetic for cable deflection and gravity stiffness of suspension bridges.” Engineering Mechanics, Vol. 26, No. 6, pp. 127–132.MathSciNetGoogle Scholar
  11. O'Brien, W. T. and Francis, A. S. (1964). “Cable movement under twodimensional loads.” Structural Division ASCE, pp. 89–123.Google Scholar
  12. Peyrot, A. H. and Goulois, A. M. (1979). “Analysis of cable structures.” Computer& Structures, Vol. 10, pp. 805–813, DOI: 10.1016/0045-7949(79)90044-0.CrossRefzbMATHGoogle Scholar
  13. Ruan, X., Zhou, J. Y., and Caprani, C. C. (2016). “Safety assessment of the antisliding between the main cable and middle saddle of a threepylon suspension bridge considering traffic load modeling.” J. Bridge Eng., Vol. 21, No. 10, pp. 04016069–1-04016069-10, DOI: 10.1061/(ASCE)BE.1943-5592.00 00927.CrossRefGoogle Scholar
  14. Steinman, D. B. (1929). A practical treatise on suspension bridges, John Wiley, Chichester.Google Scholar
  15. Shen, R. L. (1996). “Calculation methods for design and erection of cable curve of suspension bridge.” China Civil Engineering Journal, Vol. 29, No. 2, pp. 3–9.Google Scholar
  16. Shen, S. Z., Xu, C. B., and Zhao, C. (2006). Design of cable structures, Architecture & Building Press, Beijing.Google Scholar
  17. Tang, M. L. (2003). Geometric nonlinear analysis of long-span suspension bridge and its software development, PhD Thesis, Southwest Jiaotong University, Chengdu, China. (in Chinese)Google Scholar
  18. Yan, G. M. (2002). Modern Suspension Bridges, China Communications Press, Beijing.Google Scholar
  19. Zeng, S. (2010). Study on the mechanical properties of suspension bridges under construction based on refined numerical simulation, PhD Thesis, Harbin Institute of Technology University, Harbin, China. (in Chinese).Google Scholar
  20. Zhang, Q. H., Cheng, Z. Y., Cui, C., and Bao, Y. (2017). “Analytical model for frictional resistance between cable and saddle of suspension bridges equipped with vertical friction plates.” Journal of Bridge Engineering, Vol. 22, No. 1, pp. 04016103–1-04016103-12, DOI: 10.1061/(ASCE) BE.1943-5592.0000986.CrossRefGoogle Scholar

Copyright information

© Korean Society of Civil Engineers 2018

Authors and Affiliations

  • Cuijuan Li
    • 1
  • Huawen Ye
    • 1
  • Maolin Tang
    • 1
  • Xiaomin Yuan
    • 1
  1. 1.Dept. of Civil EngineeringSouthwest Jiaotong UniversityChengduChina

Personalised recommendations