Abstract
This paper aims at investigating the mechanical properties and short term durability performance of Self-Compacting Concrete (SCC)–filled High Density Polyethylene (HDPE) tubes with and without steel fibers. A total of 45 cylinder specimens were prepared and subjected to aggressive substances such as sulfate or acid contents. At the end of each exposure, the specimens were instrumented and tested under axial compression. Test variables included the environmental exposure conditions, tube thickness, inside diameter, tube height and steel fiber presence. The load-strain behavior was inspected to evaluate the effect of each exposure. The results indicated that peak load reduction in HDPE-confined specimens is only about 0.3-1% whereas this reduction is around 45-50% for unconfined specimens. In addition, increasing tube thickness by 30% results in up to 50% higher fracture energy. Results also indicate that steel fiber addition has little contribution (0.3-1%) in load capacity whereas the energy absorption capacity is increased up to 20%.
Similar content being viewed by others
References
Abdulla, N. A. (2017). “Concrete filled PVC tube: A review.” Construction and Building Materials, Vol. 156, pp. 321–329, DOI: 10.1016/j.conbuildmat.2017.08.156.
Afroughsabet, V. and Ozbakkaloglu, T. (2015). “Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers.” Construction and Building Materials, Vol. 94, pp. 73–82, DOI: 10.1016/j.conbuildmat.2015.06.051.
Afroughsabet, V., Biolzi, L., and Ozbakkaloglu, T. (2017). “Influence of double hooked-end steel fibers and slag on mechanical and durability properties of high performance recycled aggregate concrete.” Composite Structures Vol. 181, pp. 273–284, DOI: 10.1016/j.compstruct.2017.08.086.
Albitar, M., Ozbakkaloglu, T., and Louk Fanggi, B. A. (2014). “Behavior of FRP-HSC-steel double-skin tubular columns under cyclic axial compression.” Journal of Composites for Construction, Vol. 19, No. 2, pp. 04014041, DOI: 10.1061/(ASCE)CC.1943-5614.0000510.
Deluce, J. R. (2011). Cracking behaviour of steel fibre reinforced concrete containing conventional steel reinforcement, MSc Thesis, University of Toronto, Canada.
EFNARC, S. (2002). Guidelines for self-compacting concrete, EFNARC, UK (https://doi.org/www.efnarc.org), pp. 1–32.
El Chabib, H., Nehdi, M., and El Naggar, M.-H. (2005). “Behavior of SCC confined in short GFRP tubes.” Cement and Concrete Composites Vol. 27, No. 1, pp. 55–64, DOI: 10.1016/j.cemconcomp.2004.02.045.
Fakharifar, M. and Chen, G. (2016). “Compressive behavior of FRP-confined concrete-filled PVC tubular columns.” Composite Structures, Vol. 141, pp. 91–109, DOI: 10.1016/j.compstruct.2016.01.004.
Fam, A. Z. and Rizkalla, S. H. (2001). “Confinement model for axially loaded concrete confined by circular fiber-reinforced polymer tubes.” Structural Journal, Vol. 98, No. 4, pp. 451–461.
Gao, C., Huang, L., Yan, L., Kasal, B., and Li, W. (2016). “Behavior of glass and carbon FRP tube encased recycled aggregate concrete with recycled clay brick aggregate.” Composite Structures Vol. 155, pp. 245–254, DOI: 10.1016/j.compstruct.2016.08.021.
Gupta, P. K. and Verma, V. K. (2016). “Study of concrete-filled unplasticized poly-vinyl chloride tubes in marine environment.” Journal of Engineering for the Maritime Environment, Vol. 230, No. 2, pp. 229–240, DOI: 10.1177/1475090214560448.
Huang, L., Chen, L., Yan, L., Kasal, B., Jiang, Y., and Liu, C. (2017). “Behavior of polyester FRP tube encased recycled aggregate concrete with recycled clay brick aggregate: Size and slenderness ratio effects.” Construction and Building Materials, Vol. 154, pp. 123–136, DOI: 10.1016/j.conbuildmat.2017.07.197.
Jamaluddin, N., Azeez, A., Rahman, N. A., Attiyah, A., Ibrahim, M. W., Mohamad, N., and Adnan, S. (2017). “Experimental investigation of concrete filled PVC tube columns confined by plain PVC socket.” MATEC Web of Conferences, DOI: 10.1051/matecconf/201710302006.
Jiang, S.-F., Ma, S.-L., and Wu, Z.-Q. (2014). “Experimental study and theoretical analysis on slender concrete-filled CFRP–PVC tubular columns.” Construction and Building Materials, Vol. 53, pp. 475–487, DOI: 10.1016/j.conbuildmat.2013.11.089.
Lim, J. C. and Ozbakkaloglu, T. (2013). “Confinement model for FRP-confined high-strength concrete.” Journal of Composites for Construction, Vol. 18, No. 4, p. 04013058, DOI: 10.1061/(ASCE) CC.1943-5614.0000376.
Lim, J. C. and Ozbakkaloglu, T. (2014). “Influence of silica fume on stress–strain behavior of FRP-confined HSC.” Construction and Building Materials, Vol. 63, pp. 11–24, DOI: 10.1016/j.conbuildmat.2014.03.044.
Mander, J. B., Priestley, M. J., and Park, R. (1988). “Theoretical stressstrain model for confined concrete.” Journal of Structural Engineering, Vol. 114, No. 8, pp. 1804–1826, DOI: 10.1061/(ASCE)0733-9445(1988)114:8(1804).
Nanni, A. and Bradford, N. M. (1995). “FRP jacketed concrete under uniaxial compression.” Construction and Building Materials, Vol. 9, No. 2, pp. 115–124, DOI: 10.1016/0950-0618(95)00004-Y.
Nanni, A., Norris, M., and Bradford, N. (1993). “Lateral confinement of concrete using FRP reinforcement.” Special Publication, Vol. 138, pp. 193–210.
Newman, E. and Stark, T. (2009). “Ten-year PVC geomembrane durability.” Geosynthetics International, Vol. 16, No. 2, pp. 97–108, DOI: 10.1680/gein.2009.16.2.97.
Ozbakkaloglu, T. and Akin, E. (2011). “Behavior of FRP-confined normal-and high-strength concrete under cyclic axial compression.” Journal of Composites for Construction, Vol. 16, No. 4, pp. 451–463, DOI: 10.1061/(ASCE)CC.1943-5614.0000273.
Ozbakkaloglu, T. (2012a). “Axial compressive behavior of square and rectangular high-strength concrete-filled FRP tubes.” Journal of Composites for Construction, Vol. 17, No. 1, pp. 151–161, DOI: 10.1061/(ASCE)CC.1943-5614.0000321.
Ozbakkaloglu, T. (2012b). “Concrete-filled FRP tubes: Manufacture and testing of new forms designed for improved performance.” Journal of Composites for Construction, Vol. 17, No. 2, pp. 280–291, DOI: 10.1061/(ASCE)CC.1943-5614.0000334.
Ozbakkaloglu, T. (2013a). “Behavior of square and rectangular ultra high-strength concrete-filled FRP tubes under axial compression.” Composites Part B: Engineering, Vol. 54, pp. 97–111, DOI: 10.1016/j.compositesb.2013.05.007.
Ozbakkaloglu, T. (2013b). “Compressive behavior of concrete-filled FRP tube columns: Assessment of critical column parameters.” Engineering Structures, Vol. 51, pp. 188–199, DOI: 10.1016/j.engstruct.2013.01.017.
Ozbakkaloglu, T. and Fanggi, B. L. (2013). “Axial compressive behavior of FRP-concrete-steel double-skin tubular columns made of normaland high-strength concrete.” Journal of Composites for Construction, Vol. 18, No. 1, p. 04013027, DOI: 10.1061/(ASCE)CC.1943-5614.0000401.
Ozbakkaloglu, T. and Fanggi, B. A. L. (2015). “FRP–HSC–steel composite columns: Behavior under monotonic and cyclic axial compression.” Materials and Structures, Vol. 48, No. 4, pp. 1075–1093, DOI: 10.1617/s11527-013-0216-0.
Ozbakkaloglu, T. and Lim, J. C. (2013). “Axial compressive behavior of FRP-confined concrete: Experimental test database and a new design-oriented model.” Composites Part B: Engineering, Vol. 55, pp. 607–634, DOI: 10.1016/j.compositesb.2013.07.025.
Ozbakkaloglu, T., Lim, J. C., and Vincent, T. (2013). “FRP-confined concrete in circular sections: Review and assessment of stress–strain models.” Engineering Structures Vol. 49, pp. 1068–1088, DOI: 10.1016/j.engstruct.2012.06.010.
Ozbakkaloglu, T. and Xie, T. (2016). “Geopolymer concrete-filled FRP tubes: Behavior of circular and square columns under axial compression.” Composites Part B: Engineering, Vol. 96, pp. 215–230, DOI: 10.1016/j.compositesb.2016.04.013.
ASTM (1997). Standard test method for compressive strength of cylindrical concrete specimens, C39-86, ASTM, USA, pp. 20–24.
Teng, J. and Lam, L. (2004). “Behavior and modeling of fiber reinforced polymer-confined concrete.” Journal of Structural Engineering, Vol. 130, No. 11, pp. 1713–1723, DOI: 10.1061/(ASCE)0733-9445(2004)130:11(1713).
Vincent, T. and Ozbakkaloglu, T. (2013). “Influence of concrete strength and confinement method on axial compressive behavior of FRP confined high-and ultra high-strength concrete.” Composites Part B: Engineering, Vol. 50, pp. 413–428, DOI: 10.1016/j.compositesb.2013.02.017.
Vincent, T. and Ozbakkaloglu, T. (2015). “Compressive behavior of prestressed high-strength concrete-filled aramid FRP tube columns: Experimental observations.” Journal of Composites for Construction, Vol. 19, No. 6, p. 04015003, DOI: 10.1061/(ASCE)CC.1943-5614.0000556.
Wang, J.-Y. and Yang, Q.-B. (2012). “Investigation on compressive behaviors of thermoplastic pipe confined concrete.” Construction and Building Materials, Vol. 35, pp. 578–585, DOI: 10.1016/j.conbuildmat.2012.04.017.
Xiao, J., Huang, Y., Yang, J., and Zhang, C. (2012). “Mechanical properties of confined recycled aggregate concrete under axial compression.” Construction and Building Materials, Vol. 26, No. 1, pp. 591–603, DOI: 10.1016/j.conbuildmat.2011.06.062.
Xie, T. and Ozbakkaloglu, T. (2015). “Behavior of steel fiber-reinforced high-strength concrete-filled FRP tube columns under axial compression.” Engineering Structures, Vol. 90, pp. 158–171, DOI: 10.1016/j.engstruct.2015.02.020.
Xie, T. and Ozbakkaloglu, T. (2016). “Behavior of recycled aggregate concrete-filled basalt and carbon FRP tubes.” Construction and Building Materials, Vol. 105, pp. 132–143, DOI: 10.1016/j.conbuildmat.2015.12.068.
Yan, L. and Chouw, N. (2013). “Experimental study of flax FRP tube encased coir fibre reinforced concrete composite column.” Construction and Building Materials, Vol. 40, pp. 1118–1127, DOI: 10.1016/j.conbuildmat.2012.11.116.
Yan, L. and Chouw, N. (2014a). “Dynamic and static properties of flax fibre reinforced polymer tube confined coir fibre reinforced concrete.” Journal of Composite Materials Vol. 48, No. 13, pp. 1595–1610, DOI: 10.1177/0021998313488154.
Yan, L. and Chouw, N. (2014b). “Natural FRP tube confined fibre reinforced concrete under pure axial compression: A comparison with glass/carbon FRP.” Thin-Walled Structures, Vol. 82, pp. 159–169, DOI: 10.1016/j.tws.2014.04.013.
Yu, T., Fang, X., and Teng, J.-G. (2013). “FRP-confined self-compacting concrete under axial compression.” Journal of Materials in Civil Engineering Vol. 26, No. 11, p. 04014082, DOI: 10.1061/(ASCE)MT.1943-5533.0000993.
Yin, P., Huang, L., Yan, L., and Zhu, D. (2016). “Compressive behavior of concrete confined by CFRP and transverse spiral reinforcement. Part A: Experimental study.” Materials and Structures, Vol. 49, No. 3, pp. 1001–1011, DOI: 10.1617/s11527-015-0554-1.
Zaghi, A. E., Saiidi, M. S., and Mirmiran, A. (2012). “Shake table response and analysis of a concrete-filled FRP tube bridge column.” Composite Structures, Vol. 94, No. 5, pp. 1564–1574, DOI: 10.1016/j.compstruct.2011.12.018.
Zhao, J., Yu, T., and Teng, J. (2014). “Stress-strain behavior of FRPconfined recycled aggregate concrete.” Journal of Composites for Construction, Vol. 19, No. 3, p. 04014054, DOI: 10.1061/(ASCE)CC.1943-5614.0000513.
Zohrevand, P. and Mirmiran, A. (2011). “Behavior of ultrahigh-performance concrete confined by fiber-reinforced polymers.” Journal of Materials in Civil Engineering Vol. 23, No. 12, pp. 1727–1734, DOI: 10.1061/(ASCE)MT.1943-5533.0000324.
Zohrevand, P. and Mirmiran, A. (2012). “Cyclic behavior of hybrid columns made of ultra high performance concrete and fiber reinforced polymers.” Journal of Composites for Construction, Vol. 16, No. 1, pp. 91–99, DOI: 10.1061/(ASCE)CC.1943-5614.0000234.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kurtoglu, A.E., Hussein, A.K., Gulsan, M.E. et al. Mechanical Investigation and Durability of HDPE-confined SCC Columns Exposed to Severe Environment. KSCE J Civ Eng 22, 5046–5057 (2018). https://doi.org/10.1007/s12205-017-1533-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-017-1533-6