Skip to main content
Log in

Optimum conditions for extracting Ca from CKD to store CO2 through indirect mineral carbonation

  • Environmental Engineering
  • Published:
KSCE Journal of Civil Engineering Aims and scope

    We’re sorry, something doesn't seem to be working properly.

    Please try refreshing the page. If that doesn't work, please contact support so we can address the problem.

Abstract

Cement Kiln Dust (CKD), a by-product of the cement industry, was used as the raw material to determine the optimum conditions of Ca extraction, which could ultimately be used for indirect mineral carbonation. CKD was a suitable raw material for mineral carbonation due to its high CaO content (42.7%) and fine particle size (23.08 μm), not requiring a pretreatment such as grinding and pH adjustment. Extractions were conducted by varying the factors such as the solvent type, reaction time, temperature, solid-liquid ratio, solvent concentration, and stirring speed, which could affect the Ca extraction. The solvents used (hydrochloric acid, acetic acid, ammonium chloride, ammonium acetate, and sodium citrate) resulted in high Ca extraction efficiencies, and the resultant Ca extract (except for hydrochloric acid) had sufficiently high pH for the carbonation reaction. The optimum conditions set for extracting Ca from the CKD were: 30 min reaction time, 25°C reaction temperature, 1:10 solid-liquid ratio, 1.74 M solvent concentration, and 250 rpm stirring speed. Under these conditions, Ca extraction efficiencies were very high and depended on the solvent used: hydrochloric acid (94.3%), acetic acid (93.7%), ammonium chloride (86.9%), ammonium acetate (85.3%), and sodium citrate (70%). Calcium carbonate was produced by reacting CO2 with Ca extracted with ammonium chloride and ammonium acetate.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

Explore related subjects

Discover the latest articles, news and stories from top researchers in related subjects.

References

  • Baldyga, J., Henczka, M., and Sokolnicka, K. (2011). “Mineral carbonation accelerated by dicarboxylic acids as a disposal process of carbon dioxide.” Chemical Engineering Research and Design, Vol. 89, No. 9, pp. 1841–1854, DOI: 10.1016/j.cherd.2011.02.034.

    Article  Google Scholar 

  • Bobicki, E. R., Liu, Q., Xu, Z., and Zeng, H. (2012). “Carbon capture and storage using alkaline industrial wastes.” Progress in Energy and Combustion Science, Vol. 38, No. 2, pp. 302–320, DOI: 10.1016/j.pecs.2011.11.002.

    Article  Google Scholar 

  • Eloneva, S., Said, A., Fogelholm, C.J., and Zevenhoven, R. (2012). “Preliminary assessment of a method utilizing carbon dioxide and steelmaking slags to produce precipitated calcium carbonate.” Applied Energy, Vol. 90, No. 1, pp. 329–334, DOI: 10.1016/j.apenergy.2011.05.045.

    Article  Google Scholar 

  • Eloneva, S., Teir, S., Revitzer, H., Salminen, J., Said, A., Fogelholm, C. J., and Zevenhoven, R. (2009). “Reduction of CO2 emissions from steel plants by using steelmaking slags for production of marketable calcium carbonate.” Steel Research International, Vol. 80, No. 6, pp. 415–421, DOI: 10.2374/SRI09SP028.

    Google Scholar 

  • Huntzinger, D. N., Gierke, J. S., Komar Kawatra, S., Eisele, T. C., and Sutter, L. L. (2009a). “Carbon dioxide sequestration in cement kiln dust through mineral carbonation.” Environmental Science & Technology, Vol. 43, No. 6, pp. 1986–1992, DOI: 10.1021/es802910z.

    Article  Google Scholar 

  • Huntzinger, D. N., Gierke, J. S., Sutter, L. L., Komar Kawatra, S., and Eisele, T. C. (2009b). “Mineral carbonation for carbon sequestration in cement kiln dust from waste piles.” Journal of Hazardous Materials, Vol. 168, No. 1, pp. 31–37, DOI: 10.1016/j.jhazmat.2009.01.122.

    Article  Google Scholar 

  • Kodama, S., Nishimoto, T., Yamamoto, N., Yogo, K., and Yamada, K. (2008). “Development of a new pH-swing CO2 mineralization process with a recyclable reaction solution.” Energy, Vol. 33, No. 5, pp. 776- 784, DOI: 10.1016/j.energy.2008.01.005.

    Article  Google Scholar 

  • Kunzler, C., Alves, N., Pereira, E., Nienczewski, J., Ligabye, R., Einloft, S., and Dullius, J. (2011). “CO2 storage with indirect carbonation using industrial waste.” Energy Procedia, Vol. 4, pp. 1010–1017, DOI: 10.1016/j.egypro.2011.01.149.

    Article  Google Scholar 

  • Lekakh, S. N., Rawlins, C. H., Robertson, D. G. C., Richards, V. L., and Peaslee, K. D. (2008). “Kinetics of aqueous leaching and carbonization of steelmaking slag.” Metallurgical and Materials Transactions B, Vol. 39, No. 1, pp. 125–134, DOI: 10.1007/s11663-007-9112-8.

    Article  Google Scholar 

  • Montes-Hernandez, G., Perez-Lopez, R., Renard, F., Nieto, J. M., and Charlet, L. (2009). “Mineral sequestration of CO2 by aqueous carbonation of coal combustion fly-ash.” Journal of Hazardous Materials, Vol. 161, Nos. 2–3, pp. 1347–1354, DOI: 10.1016/j.jhazmat.2008.04.104.

    Article  Google Scholar 

  • Olajire, A. A. (2013). “A review of mineral carbonation technology in sequestration of CO2.” Journal of Petroleum Science and Engineering, Vol. 109, pp. 364–392, DOI: 10.1016/j.petrol.2013.03.013.

    Article  Google Scholar 

  • Said, A., Mattila, H. P., Jarvinen, M., and Zevenhoven, R. (2013). “Production of Precipitated Calcium Carbonate (PCC) from steelmaking slag for fixation of CO2.” Applied Energy, Vol. 112, pp. 765–771, DOI: 10.1016/j.apenergy.2012.12.042.

    Article  Google Scholar 

  • Sun, Y., Parikh, V., and Zhang, L. (2012). “Sequestration of carbon dioxide by indirect mineralization using Victorian brown coal fly ash.” Journal of Hazardous Materials, Vols. 209-210, pp. 458–466, DOI: 10.1016/j.jhazmat.2012.01.053.

    Article  Google Scholar 

  • Sun, Y., Yao, M. S., Zhang, J. P., and Yang, G. (2011). “Indirect CO2 mineral sequestration by steelmaking slag with NH4Cl as leaching solution.” Chemical Engineering Journal, Vol. 173, No. 2, pp. 437–445, DOI: 10.1016/j.cej.2011.08.002.

    Article  Google Scholar 

  • Teir, S., Eloneva, S., Fogelholm, C. J., and Zevenhoven, R. (2007). “Dissolution of steelmaking slags in acetic acid for precipitated calcium carbonate production.” Energy, Vol. 32, No. 4, pp. 528–539, DOI: 10.1016/j.energy.2006.06.023.

    Article  Google Scholar 

  • Teramura, S., Isu, N., and Inagaki, K. (2000). “New building material from waste concrete by carbonation.” Journal of Materials in Civil Engineering, Vol. 12, No. 4, pp. 288–293, DOI: 10.1061/(ASCE) 0899-1561(2000)12:4(288).

    Article  Google Scholar 

  • Uibu, M., Kuusik, R., Andreas, L., and Kirsimae, K. (2011). “The CO2-binding by Ca-Mg-silicates in direct aqueous carbonation of oil shale ash and steel slag.” Energy Procedia, Vol. 4, pp. 925–932, DOI: 10.1016/j.egypro.2011.01.138.

    Article  Google Scholar 

  • Velts, O., Uibu, M., Kallas, J., and Kuusik, R. (2011). “Waste oil shale as a novel of calcium for precipitated calcium carbonate: Carbonation mechanism, modeling, and product characterization.” Journal of Hazardous Materials, Vol. 195, pp. 139–146, DOI: 10.1016/j.jhazmat.2011.08.019.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Myoung-Jin Kim.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Kim, MJ., Pak, S.Y., Kim, D. et al. Optimum conditions for extracting Ca from CKD to store CO2 through indirect mineral carbonation. KSCE J Civ Eng 21, 629–635 (2017). https://doi.org/10.1007/s12205-016-0913-7

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12205-016-0913-7

Keywords

Navigation