Abstract
The main of study is to investigate the effect of moisture variation and micro-structure on the growth mold at surface of building materials. The two different water-cement ratio of mortars (w/c = 0.4, 0.6), brick and tiles were used in this study. The mercury Intrusion Porosity-Meter (MIP) was used to determine the pore distribution of building materials. The moisture variation of materials was recorded in constant climate chamber (25oC, relative humidity 80%), general indoor environment (28°C, relative humidity 55%) and water damage simulation environment. The results indicated that the pore size and distribution will affect the surface water ratio and moisture content of materials. The surface water ratio of specimen was affected by different environment seriously. The surface water ratio was an important factor in mold growth.
Similar content being viewed by others
References
Adan, O. C. G. (1994). On the fungal defacement of interior finishes, PhD Thesis, University of Eindhoven, Wageningen, The Netherlands.
Flannigan, B. and Miller, J. D. (1994). Health implications of fungi in indoor environments-an overview, In:R. Samson, B. Flannigan, M. E. Flannigan, A. P. Verhoeff, O. C. G. Adan and E. S. Hoekstra (Eds.), Health Implications of Fungi in Indoor Environments, Air quality monographs, Elsevier Science B. V., Amsterdam, The Netherlands, Vol. 2, pp. 2–28.
Flannigan, B. and Morey, P. R. (1996). Control of moisture problems affecting biological indoor air quality, ISIAQ-Guideline. Task Force I. International Society of Indoor Air Quality and Climate, Ottawa.
Hukka, A. and Viitanen, H. (1999). “A mathematical model of mold growth on wooden material.” Wood Science and Technology, Vol. 33, No. 6, pp. 475–485.
Kaariainen, H. and Kalliokoski, P. (2000). “Fungal growth and survival in building materials under fluctuating moisture and temperature conditions.” Int. Biodeter. Biodeg., Vol. 46, No. 1, pp. 117–127.
Li, C.-S. and Hsu, L.-Y. (1997). “Airborne fungus allergen in association with residential characteristics in atopic and control children in a subtropical region.” Arch. Environ. Health., Vol. 52, No. 1, pp. 72–79.
Nielsen, K. F., Holm, G., Uttrup, L. P., and Nielsen, P. A. (2004). “Mould growth on building materials under low water activities: Influence of humidity and temperature on fungal growth and secondary metabolism.” Int. Biodeter. Biodeg., Vol. 54, No. 4, pp. 325–336.
Pasanen, A.-L., Pasanen, P., Jantunen, M., and Nevalainen, A. (1991). “Laboratory studies on the relationship between fungal growth and atmospheric temperature and humidity.” Environ. Int., Vol. 17, No. 4, pp. 22–228.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cheng, A., Hsin, Y. & Lin, WT. Effects of mold growth on building materials by different environments in Taiwan. KSCE J Civ Eng 18, 1083–1090 (2014). https://doi.org/10.1007/s12205-014-0086-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-014-0086-1