Abstract
The purpose of this study is to evaluate the flexural behavior of RC (Reinforced Concrete) beams strengthened with prestressed CFRP (Carbon Fiber Reinforced Polymers) plates and suggest the prediction method for the strength of RC flexure member strengthened with prestressed CFRP plate by bond-slip parameter determination procedure for retrofit design. The uniaxial tensile test of CFRP plate specimen and the pull-test of CFRP plate bonded to concrete are carried out to investigate the strengthening effect of CFRP plate on RC members in detail. The behavior model of CFRP plate and the bond-slip model to be implemented in finite element analysis are proposed based on a parametric study and test results. The proposed method of flexural strength prediction for RC beams strengthened with prestressed CFRP plates are verified through comparing and analyzing with experimental results of this study. Through verifications, it is determined that the proposed strength prediction method can effectively be applied in flexural retrofit design of RC beams using prestressed CFRP plates.
Similar content being viewed by others
References
ACI 440-02 (2002). Guide for the design and construction of externally bonded FRP system for strengthening concrete structures, Reported by ACI-440.
Bank, L. C. (2006). Composites for construction: Structural design with FRP materials, John Wiley & Sons.
Chen, J. F. and Teng, J. G. (2001). “Anchorage strength models for FRP and steel plates bonded to concrete.” Journal of Structural Engineering, Vol. 127, No. 1, pp. 784–791.
Garden, H. N. and Hollaway, L. C. (1998). “An experimental study of the influence of plate end anchorage of carbon fibre composites plates used to strengthen reinforced concrete beams.” Composite Structures, Vol. 42, No. 2, pp. 175–188.
Keller T. (2003). Use of fibre reinforced polymers in bridge construction, International Association for Bridge and Structural Engineering.
Kim, K. S. (1997). Behavior analysis of flexural member strengthened with CFRP plate, Master’s Thesis, School of Civil and Environmental Engineering, Yonsei University.
Nakaba K., Toshiyuki K., Tomoki F., and Hiroyuki Y. (2001). “Bond behavior between fiber-reinforced polymer laminates and concrete.” ACI Structural Journal, Vol. 98, pp. 359–367.
Pellegrino, C. and Modena, C. (2007). “Flexural behavior of RC and PC beams strengthened with external pretensioned FRP laminates.” Proceedings of Fracture Mechanics of Concrete and Concrete Structures, Design, Assessment and Retrofitting of RC Structures, pp.1235–1240.
Pan, J. and Leung, C. K. Y. (2007). “Effect of concrete composition on FRP/concrete bond capacity.” Journal of Composites for Construction, Vol. 11, No. 6, pp. 611–618.
Park, J, S., Park, Y, H., Yoo, Y, J., and Jeong, W, T. (2005). “Strengthening capacity of RC beams tension-strengthened with carbon plate.” Proceedings of Korea Concrete Society, Vol. 17, No. 1, pp. 279–282.
Quantrill, R. J. and Hollaway, L. C. (1998). “The Flexural rehabilitation of reinforced concrete beams by the use of prestressed advanced composite plates.” Composite Science and Technology, Vol. 58, No. 8, pp. 1259–1275.
Quantrill, R. J., Hollaway, L. C., and Thorne, A. M. (1996). “Prediction of the maximum plate and stresses of FRP strengthened beams.” Part III. Magazine of Concrete Research, Vol. 48, No. 177, pp. 343–351.
Savioa, M., Farracuti, B., and Mazzotti, D. (2003). “Non-Linear Bond-Slip Law for FRP-Concrete Interface.” Proceedings of 6th International Symposium on FRP Reinforcement for Concrete Structures, Singapore, World Scientific Publications, pp. 163–172.
Shin, Y. S. and Lee, C. D. (2003). “Flexural behavior of reinforced concrete beams strengthened with carbon fiber-reinforced polymer laminates at different levels of sustaining load.” ACI Structural Journal, Vol. 100, No. 2, pp. 231–239.
Sim, J. S. and Bae, I. (1999). “Analytical study on the interface debonding of RC beam strengthened with carbon fiber sheet.” Proceedings of Korean Concrete Society, Vol. 11, No. 2, pp. 177–186.
Svecova, D. and Razaqpur, A. G. (2000). “Flexural behavior of concrete beams reinforced with Carbon Fiber-Reinforced Polymer (CFRP) prestressed prisms.” ACI Structural Journal, Vol. 97, No. 5, pp. 731–738.
Ueda, T., Dai, J. G., and Sato, Y. (2003). “A nonlinear bond stress-slip relationship for FRP sheet-concrete interface.” Proceedings of International Symposium on Latest Achievement of Technology and Research on Retrofitting Concrete Structures, pp. 113–120.
Woo, S. K. and Lee, Yun. (2010). “Experimental study on interfacial behavior of CFRP-bonded concrete.” KSCE Journal of Civil Engineering, Vol. 14, No. 3, pp. 385–393.
Yoo, Y. C., Choi, K. S., Park, Y. H., and Kim, K. H. (2005). “Flexural behaviors of RC beams strengthened with externally prestressed carbon fiber plate.” Proceedings of Korea Concrete Society, Vol. 17, No. 1, pp. 255–258.
Yuan, H., Wu, Z., and Yoshizawa, H. (2001). “Theoretical solutions on interfacial stress transfer of externally bonded steel/composite plates.” Journal of Structural Mechanics and Earthquake Engineering, JSCE, Vol. 18, No. 1, pp. 27–39.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Woo, SK., Kim, JH.J., Byun, KJ. et al. Bond-slip parameter determination procedure of RC flexure member strengthened with prestressed CFRP plates. KSCE J Civ Eng 17, 179–191 (2013). https://doi.org/10.1007/s12205-013-1592-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-013-1592-2