Skip to main content

Research on improvement of system for automatic line stripe removal using dry ice blaster

Abstract

All roadways, bike lanes, parking lots, and private parking areas are designated for drivers using painted line stripes. This line striping is an important traffic element for safety and the proper flow of vehicles. These lines have to be repainted for various reasons such as expansion and line changes, which make it necessary to remove the existing line stripes in advance. However, the current line stripe removal process is both labor intensive and time consuming, if it employs a conventional grinding type machine. The necessary manual tasks involve various dangers, including traffic accidents and the explosion of the harmful gas that is used for finalizing the removal process. Accordingly, an automatic line stripe removal system was developed in order to improve this line stripe removal process. But previous studies have remained on the basic research stages, confirming the potential for this automatic line stripe removal system. Therefore, this study is aimed at improving the system and process used in the traditional line stripe removal system. Also, this study is aimed at enhancing performance and features of the previous system and developing the concept for an automated system to improve the line stripe removal efficiency.

This is a preview of subscription content, access via your institution.

References

  • Bernold, L. E., Lee, T. S., Koo, J. K., and Moon, D. S. (2010). “Automated eco-friendly line stripe removal system.” Automation in Construction, Vol. 19, No. 6, pp. 694–701.

    Article  Google Scholar 

  • Cho, Y., Kabassi, K., Pyeon, J. H., Choi, K. H., Wang, C., and Norton, T. (2013). “Effectiveness study for temporary pavement markings removal methods in roadway construction zones.” J. Constr. Eng. Manage., ASCE, Vol. 139, No. 3, pp. 257–266.

    Article  Google Scholar 

  • Cho, Y., Pyeon, J. H., and Kabassi, K. (2011). Effectiveness study on temporary pavement marking removals methods, Nebraska Department of Roads, Lincoln, NE.

    Google Scholar 

  • Haas, K. (2001). Methods for traffic stripe removal, Research Notes, Oregon Department of Transportation.

    Google Scholar 

  • Han, J. G., Kim, K. T., and Kwon, S. W. (2006). “Performance evaluation of road stripe removing equipment using high pressure water jet.” Korean Journal of Construction Engineering and Management, KICEM, Vol. 7, No. 6, pp 79–89.

    Google Scholar 

  • Koo, J. K., Moon, D. S, Bernold, L. E., and Lee, T. S. (2009). “Study on the application of dry-ice blaster for development of automatic stripe-line removal.” Journal of the Korean Society of Civil Engineers, KSCE, Vol. 29, No. 2D, pp. 245–253.

    Google Scholar 

  • Korea Institute of Machinery & Materials (2006). Development of automatic road sign erasing equipment using the high pressure waterjet, Ministry of Construction & Transportation, Korea.

    Google Scholar 

  • Korea Road & Transportation Association (2009). Special specifications about road construction, Ministry of Land, Transport and Maritime Affairs, Korea.

    Google Scholar 

  • Kwon, S. W., Han, J. G., and Kim, K. T. (2004). “Development of a control system for an automatic road sign removing equipment using high pressure water-jet.” Korean Journal of Construction Engineering and Management, KICEM, Vol. 5, No. 4, pp. 139–146.

    Google Scholar 

  • Ministry of Land, Transport and Maritime Affairs (2009). Standard specification for road construction works, Korea.

    Google Scholar 

  • Moon, D. S. (2009). Study of advanced technology for road stripe removal, MSc Thesis, Hanyang University, Korea.

    Google Scholar 

  • National Police Agency (2005). Manual for installation and maintenance of traffic road stripe, Basic Manual 2, Vol. 41, Traffic 2-2, Korea.

    Google Scholar 

  • Park, T. H., Park, J. J., and Yoon, P. (2008). “A study on traffic accident characteristics of freeway work zones.” Journal of The Korea Institute of Intelligent Transport Systems, Vol. 7, No. 1, pp. 127–136.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Tai Sik Lee.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Park, E.S., Lee, T.S. Research on improvement of system for automatic line stripe removal using dry ice blaster. KSCE J Civ Eng 19, 28–35 (2015). https://doi.org/10.1007/s12205-013-1287-8

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12205-013-1287-8

Keywords

  • line stripe
  • automatic line stripe removal system
  • dry ice blaster
  • needle scaler