Abstract
In the Nakdong River delta, the depositional environment is slightly different in every locality. An attempt was made to conduct a geotechnical characterization of clay in the floodplain of the delta area, where a series of field and laboratory tests was executed at five sites. The results indicate that variations in the slope of cone resistance change with depth are utilized to stratify the deposits and to extend a paleoenvironmental profile that has been investigated at a neighboring site. Some of the index properties and the compression index appear to correlate with the depositional environment, so that they have a well-defined trend with depth irrespective of location and empirical formulas may be developed between them. However, on the top 10 m layer deposited during regression, several properties are different in the tested sites. The ratio of the field vane strength to the effective overburden stress shows a poor correlation with water content, indicating no relationship with the plasticity index. The in-situ void index Iv0 shows that clays of the Tidal Flat (TF) and Inner Shelf (IS) units are more structured than other normally consolidated clays, whereas that of the Shallow Marine (SM) unit, which is overconsolidated, is not. The sensitivity (St), ranging from 5 to 9 at a location, vary in a manner similar to a well-defined trend of the properties. Based on the Iv0, recompression, and Cc-e0-St relation, the clay is moderately or highly structured but weakly bonded, where Cc is compression index and e0 is initial void ratio.
Similar content being viewed by others
References
Bjerrum, L. (1972). “Embankments on soft ground; SOA report.” ASCE Special Conf. Performance of Earth and Earth-Supported Structures, Purdue Univ., Lafayette, In., Vol. 2, pp. 1–54.
Burland, J. G. (1990). “On compressibility and shear strength of natural clays.” Geotechnique, Vol. 40, No. 3, pp. 329–378.
Chung, S. G. (1999). “Engineering properties and consolidation characteristics of Kimhae estuarine clayey soil.” Thick Deltaic Deposits, ATC-7 Workshop, Special Publication at the 11th ARC on SMGE, Seoul, pp. 93–108.
Chung, S. G. (2005). Keynote lecture: “Sampling techniques and their effects in characterizing of Pusan clay.” Proceedings, Current Geotechnical Issues of Thick Clay Deposits, Joint Symposium of ISSMGE ATC7 and KGS TC, Sept 21–22, Busan, pp. 3–36; also Proceedings of International Conf on Civil and Environmental Engineering, ICCEE-2005, Higashi-Hiroshima, Japan, Oct 26–27, Japan, pp. 29–59.
Chung, S. G., Beck, S. H., Ryu, C. K., and Kim, S. W. (2003). Keynote lecture: “Geotechnical characterization of Pusan clays.” Korea-Japan Joint Workshop on Characterization of Thick Clay Deposits, Reclamation and Port Construction, ATC-7, April 8–10, Busan, pp. 3–44.
Chung, S. G., Chung, J. G., Jang, W. Y., and Lee, J. M. (2010). “Correlations between CPT and FVT results for Busan clay.” Marine Georesources & Geotechnology, Vol. 28, No. 1, pp. 49–63.
Chung S. G. and Giao, P. H. (2001). “Examination of Pusan clays at a reference testing site.” Lowland Technology International, IALT, Vol. 3, No. 2, pp. 1–14.
Chung S. G., Giao, P. H., Kim, G. J., and Leroueil, S. (2002b). “Geotechnical characteristics of Pusan clays.” Canadian Geotechnical Journal, Vol. 39, No. 5, pp. 1050–1060.
Chung, S. G., Giao, P. H., Kwag, J. M., and Tanaka, H. (2002d). “Comparative study on Korean and Japanese samplers in investigation of Pusan soft clays.” Intl. Workshop on Foundation Design Codes and Soil Investigation in view of International Harmonization and Performance Based Design, IWS Kamakura 2002, pp. 183–189.
Chung S. G., Giao, P. H., Nagaraj, T. S., and Kwag, J. M. (2002a). “Characterization of estuarine marine clays for coastal reclamation in Pusan, Korea.” Marine Georesources and Geotechnology, Vol. 20, No. 4, pp. 237–254.
Chung, S. G., Giao, P. H., and Tanaka, H. (2002c). “Geotechnical characteristics and engineering problems of Pusan clays.” International Workshop on Characterisation and Engineering Properties of Natural Soils, Vol. 1, Dec. 2–4, Singapore, Balkema, pp. 505–541.
Chung, S. G., Jang, W. Y., Ninjgarav, E., and Ryu, C. K. (2006a). “Compressibility characteristics associated with depositional environment of Pusan clay in the Nakdong River estuary.” Journal of Korean Geotechnical Society, Vol. 22, No. 12, pp. 57–65 (in Korean).
Chung, S. G., Kim, S. K., Kang, Y. J., Im, J. C., and Prasad, K. N. (2006b). “Failure of a breakwater founded on a thick normally consolidated clay.” Geotechnique, Vol. 56, No. 6, pp. 393–409.
Chung, S. G., Kim, G. J., Ryu, C. K., and Kim, M. S. (2007). “Undrained shear strength from field vane test on Busan clay.” Marine Georesources and Geotechnology, Vol. 25, No. 3, pp. 167–179.
Chung, S. G., Kwag, J. M., Giao, P. H., Back, S. H., and Prasad, K. N. (2004a). “A study on soil disturbance of Pusan clays with reference to drilling, sampling and extruding.” Geotechnique, Vol. 54, No. 1, pp. 61–65.
Chung, S. G., Kwag, J. M., Jang, W. Y., and Kim, D. G. (2002e). “Compressibility characteristics of estuarine clays in the Nakdong River plain.” Journal of Korean Geotechnical Society, Vol. 18, No. 4, pp. 295–307 (in Korean).
Chung, S. G. and Kwon, H. J. (2010). “An oil-operated fixed-piston sampler and its applicability.” J. Geotechnical and Geoenvironmental Engineering, ASCE (in review).
Chung, S. G., Prasad, K. N., Nagaraj, T. S., Chung, J. G. and Jo, K. Y. (2004b). “Assessment of compressibility behaviour of naturally cemented soft clays.” Marine Georesources and Geotechnology, Vol. 22, Nos. 1–2/January–June, Taylor & Francis, pp. 1–20.
Chung, S. G., Ryu, C. K., Jo, K. Y., and Huh, D. Y. (2005). “Geological and geotechnical characteristics of marine clays at the Busan new port.” Marine Georesources and Geotechnology, Vol. 23, No. 3, pp. 235–251.
Hight, D. M., Paul, M. A., Barras, B. F., Powell, J. J. M., Nash, D. F. T., Smith, P. R., Jardin, R. J., and Edwards, D. H. (2002). “The characterization of the Bothkennar clay.” International Workshop on Characterisation and Engineering Properties of Natural Soils, Vol. 1, Dec. 2–4, Singapore, Balkema, pp. 543–597.
Horng, V., Tanaka, H., and Obara, T. (2010). “Effects of sampling tube geometry on soft clayey sample quality evaluated by nondestructive methods.” Soils and Foundations, Vol. 50, No. 1, pp. 93–107.
JGS 1221-1995 (1998). Standard of Japanese geotechnical society for soil sampling — Standards and explanations (English version), Japanese Geotechnical Society, Tokyo.
Kim, H. M. (1988). “Assessment of tectonic and depositional environments of Naktong Delta, Korea.” Journal of Korean Earth Science Society, Vol. 9, No. 1, pp. 45–69 (in Korean).
KS F 2103 (2008). Testing method for pH of soils, Korean Standards Association.
KS F 2104 (2008). Testing method of organic matter in soils by ignition loss, Korean Standards Association.
KS F 2317 (2006). Method for thin-walled tube sampling of soils, Korean Standards Association.
Kwag, J. M., Chung, S. G., Baek, S. H., Lee, Y. N., and Cho, K. Y. (2003). “Sample disturbance due to sampling techniques and comparison of consolidation parameters between testing methods on Pusan clays.” Journal of Korean Geotechnical Society, Vol. 19, No. 4, pp. 43–53 (in Korean).
Kwon, H. J. (1973). “Physicography of the Nakdong River delta.” Journal of Geography, Vol. 8, No. 1, pp. 8–23 (in Korean).
Lee, S. G. (1999). Engineering properties and mineralogy of clay sediments in the Noksan industrial complex area of the estuary of the Nakdong River, MSc Thesis, Pusan National University, p. 92 (in Korean).
Leroueil, S., Magnan, J.-P., and Tavenas, F. (1990). Embankments on soft clays, Tran. by D. M. Wood. Ellis Horwood, London.
Leroueil, S., Tavenas, F., and Le Bihan, J. P. (1983). “Proprietes caracteristiques des argiles de lest du.” Canadian Geotechnical Journal, Vol. 20, No. 4, pp. 681–705.
Leroueil, S., Tavaenas, F., Brucy, F., La Rochelle, P., and Roy, M. (1979). “Behaviour of destructured natural clays.” J. Geotechnical Engineering, ASCE, Vol. 105, No. GT6, pp. 759–778.
Nagaraj, T. S. and Murthy, B. R. S. (1986). “A critical reappraisal of compression index equation.” Geotechnique, Vol. 36, No. 1, pp. 27–32.
Ninjgarav, E., Chung, S. G., Jang, W. Y., and Ryu, C. K. (2007). “Pore size distribution of Pusan clay measured by Mercury Intrusion Porosimetry.” KSCE Journal of Civil Engineering, Vol. 11, No. 3, pp. 133–139.
Osterberg, J. O. (1973). “An improved hydraulic piston sampler.” Proc. 8th Int. Conf Soil Mech. and Found. Eng., Moscow, Vol. 1.2, pp. 317–321.
Plant, G. W., Covil, C. S., and Hughes, R. A. (1998). Site preparation for the new Hong Kong International Airport, Thomas Telford, UK.
Powell, J. J. M. and Quarterman, R. S. T. (1995). “Engineering geological mapping of soft clay using the piezocone.” Proc. Intl. Symp. on Cone Penetration Testing, CPT’ 95, Sweden, 2, Swedish Geotechnical Society, pp. 263–268.
Ryu, C. K. (2002). Engineering geological characteristics of the Holocene marine clayey sediments in the estuary of Nakdong River, PhD Thesis, Pusan National University, p. 230.
Ryu, C. K., Kang, S., and Chung, S. G. (2005). “Late Quaternary paleoenvironmental changes in the western Nakdong River delta.” J. Korean Earth Science Society, Vol. 26, No. 5, pp. 443–458.
Tanaka, H., Mishima, O., Tanaka, M., Park, S. Z., Jeong, G. H., and Locat, J. (2001). “Characterization of Yangsan clay, Pusan, Korea.” Soils and Foundations, Vol. 41, No. 2, pp. 89–104.
Tanaka, H., Ritoh, F., and Omukai, N. (2002). “Quality of samples retrieved from great depth and its influence on consolidation properties.” Canadian Geotechnical Journal, Vol. 39, No. 6, pp. 1288–1301.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chung, S.G., Ryu, C.K., Min, S.C. et al. Geotechnical characterisation of Busan clay. KSCE J Civ Eng 16, 341–350 (2012). https://doi.org/10.1007/s12205-012-1433-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-012-1433-8