Abstract
The miniaturization of products requires the mass production of microparts. The microforming can well meet this requirement. Due to the emergence of decreasing flow stress scale effect in the micro scale, the traditional forming process and theory may fail. Based on the crystal plasticity theory, upsetting tests of micro copper cylinders with different dimensions and grain sizes were simulated, and the decreasing flow stress scale effect was studied and discussed. Results show that with the decrease of billet dimensions, the flow stress is gradually decreased, and the decreasing flow stress scale effect is emerged; with the increase of grain size, the decreasing flow stress scale effect is more remarkable. It can also be seen that the decreasing flow stress scale effect can be well simulated with the crystal plasticity theory, and the necessary relevant information is provided for deeper understanding on this scale effect, as well as the design of processes and die structures in the microforming.
Similar content being viewed by others
References
Geiger M, Kleiner M, Eckstein R, et al. Microforming [J]. Annals of the CIRP, 2001, 50(2): 445–462.
Geiger M, Vollertsen F, Kals R. Fundamentals on the manufacturing of sheet metal microparts [J]. Annals of the CIRP, 1996, 45(1): 277–282.
Engel U, Egerer E. Basic research on cold and warm forging of microparts [J]. Key Engineering Materials, 2003, 233–236: 449–456.
Engel U, Eckstein R. Microforming from basic research to its realization [J]. Journal of Materials Processing Technology, 2002, 125–126: 35–44.
Raulea L V, Govaert L E, Baaijens F P T. Grain and specimen size effects in processing metal sheets[C]//Proceedings of the 6th ICTP. Berlin: Springer-Verlag, 1999: 939–944.
Chan W L, Fu M W, Lu J. Experimental and simulation study of deformation behavior in microcompound extrusion process [J]. Materials and Design, 2011, 32(2): 525–534.
Chan W L, Fu M W, Yang B. Study of size effect in micro-extrusion process of pure copper [J]. Materials and Design, 2011, 32(7): 3772–3782.
Chan W L, Fu M W. Experimental studies and numerical modeling of the specimen and grain size effects on the flow stress of sheet metal in microforming [J]. Materials Science and Engineering A, 2011, 528: 7674–7683.
Wang Zi-qiang, Duan Zhu-ping. Meso-plasticity mechanics [M]. Beijing: Science Publishing House, 1995 (in Chinese).
Peirce D, Asaro R J, Needleman A. Material rate dependence and localized deformation in crystalline solids [J]. Acta Metallmater, 1983, 31(12): 1951–1976.
GB/T 7314-2005, Metallic materials-compression testing [S].
Borxin P I. Physical basis of plastic deformation [M]. Huang Ke-qing (trans.). Beijing: Metallurgical Industry Press, 1989 (in Chinese).
Yang Jue-xian. Physical basis of metal plastic deformation [M]. Beijing: Metallurgical Industry Press, 1988 (in Chinese).
Jiang Z H, Lian J S, Baudelet B. A dislocation density approximation for the flow stress-grain size relation of polycrystals [J]. Acta Metallurgicaet Materialia, 1995, 43(9): 3349–3360.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: the National Natural Science Foundation of China (Nos. 50835002 and 50975174) and the Ph.D. Programs Foundation of Ministry of Education of China (Nos. 200802480053 and 20100073110044)
Rights and permissions
About this article
Cite this article
Shen, Y., Yu, Hp., Dong, Xh. et al. Simulation and discussion on the decreasing flow stress scale effect. J. Shanghai Jiaotong Univ. (Sci.) 17, 306–311 (2012). https://doi.org/10.1007/s12204-012-1274-0
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12204-012-1274-0