Abstract
A cybernetics model of manufacturing execution system (MES CM) was proposed and studied from the viewpoint of cybernetics. Combining with the features of manufacturing system, the MES CM was modeled by “generalized modeling” method that is discussed in large-scale system theory. The mathematical model of MES CM was constructed by the generalized operator model, and the main characteristics of MES CM were analyzed.
Similar content being viewed by others
References
Bill S. MES five years later: Prelude to phase III [R]. American: AMR Report 13725, 1995.
MESA International. MES explained: A high level vision [M]. Pittsburgh: MESA International White Paper Number 6, 1997.
Bill S. Do we need a new model for plant systems [R]. American: AMR Report 13550, 1998.
Chen Y. MES and its typical structures [EB/OL]. http://www.e-works.net.cn/ewk2004/ewkArticles/462/Article15008, 2004.
MESA International. The benefits of MES: A report from the field [M]. Pittsburgh: MESA International White Paper Number 1, 1997.
MESA International. MES functionalities & MRP tomes data flow possibilities [M]. Pittsburgh: MESA International White Paper Number 2, 1997.
MESA International. Controls definition & MES to controls data flow possibilities [M]. Pittsburgh: MESA International White Paper Number 3, 1997.
LI Tie-ke. A review of the manufacturing execution system models [J]. Metallurgical Industry Automation, 2003, 4(1): 13–17.
MESA International. Collaborative manufacturing explained [M]. Pittsburgh: MESA International White Paper, 2004.
MESA International. MESA’s next generation collaborative MES mode [M]. Pittsburgh: MESA International White Paper Number 8, 2004.
Yan T X. Large scale system cybernetics [M]. Beijing: National Defence Industry Press, 1994.
RAO Yun-ching, LI Pei-gen, LI Shu-xia, et al. A review of the development of manufacturing execution systems (MES) [J]. Mechanical Science and Technology, 2002, 21(6): 1011–1016.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wu, Y., Xu, Xd. & Li, Cx. Modeling research on manufacturing execution system based on large-scale system cybernetics. J. Shanghai Jiaotong Univ. (Sci.) 13, 744–747 (2008). https://doi.org/10.1007/s12204-008-0744-x
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12204-008-0744-x