Abstract
For a more accurate forming calculation and numerical simulation of hydraulic turbine blade, experimental studies on the flow stress of stainless steel 0Cr13Ni5Mo were carried out upon Gleeble-1500 thermal simulator under different deformation conditions. The results then were analyzed and the effects of all influencing factors were summarized consequently. New mathematic models were conceived. Utilizing the software Matlab, regression coefficients were calculated by the least square method. The model has an eminent capability of curve-fitting performance with impact structure whose correlation coefficient is up to 0.908 0 and the cosine coefficient is 0.995 8. All mathematic models and process parameters can be used in engineering calculations or computer simulations.
Similar content being viewed by others
References
Yoon J H, Yoon E P, Lee B S. Correlation of chemistry, microstructure and ductile fracture behaviours of niobium-stabilized austenitic stainless steel at elevated temperature [J]. Scripta Materialia, 2007, 57(1): 25–28.
Bao C G, Xin J D, Gao Y M, et al. Applied limitation of carbon steel and austenitic stainless steel materials in hydroelectric Engineering [J]. Chinese Journal of Mechanical Engineering, 2004, 40(12): 86–89 (in Chinese).
Bao C G, Xin J D, Gao Y M, et al. Study on Electrochemical Corrosion Properties of Stainless Steel Material Used as Hydraulic Turbine Parts [J]. Foundry, 2002, 51(7): 425–427 (in Chinese).
Zhang L, Fontana G. Autogenous laser welding of stainless steel to free-cutting steel for the manufacture of hydraulic valves [J]. Journal of Materials Processing Technology, 1998, 74(1–3): 174–182.
Xiaojun Z, Procopiak L A J, Souza N C, et al. Phase transformation during cavitation erosion of a Co stainless steel [J]. Materials Science and Engineering A, 2003, 358(1–2): 199–204.
Johan Singh P, Guha B, Achar D R G. Fatigue life prediction for stainless steel welded plate CCT geometry based on Lawrence’s local-stress approach [J]. Engineering Failure Analysis, 2003, 10(6): 655–665.
Liu W, Zheng Y G, Liu C S, et al. Cavitation erosion behavior of Cr-Mn-N stainless steels in comparison with 0Cr13Ni5Mo stainless steel [J]. Wear, 2003, 254(7–8): 713–722.
Zheng Y G, Luo S Z, Ke W. Effect of passivity on electrochemical corrosion behavior of alloys during cavitation in aqueous solutions [J]. Wear, 2007, 262(11–12): 1308–1314.
Wang B C and Zhu J H. Influence of ultrasonic cavitation on passive film of stainless steel [EB/OL]. http://www.elsevier.com/locate/ultsonch, 27April 2007.
Qu B, Zhou H, Jiang C M, et al. Experimental investigation on performances of carbide face milling with 0Cr13Ni5Mo [J]. Tool Engineering, 2003, 37(2): 3–4 (in Chinese).
Lai X D. Latest progress of manufacture technology on large-scale hydraulic turbine blade [J]. Journal of Xihua University, 2006, 25(2): 72–76 (in Chinese).
Wang D Z, Wang Z K. Study on mould pressing technology of hydraulic turbine runner blades [J]. Dongfang Electric Review, 2006, 20(1): 42–46 (in Chinese).
Zhou J H, Guan K Z. Resistance Force of Metal Plastic Deformation [M]. Beijing: China Machine Press, 1989.
Kiliçman A, Zhour AI, Vector least-squares solutions for coupled singular matrix equations [J]. Journal of Computational and Applied Mathematics, 2007, 206(2): 1051–1069.
Zhang S Q. Approach on the fitting optimization index of curve regression [J]. China Hygienic Statistic, 2002, 19(1): 9–11 (in Chinese).
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: the National Natural Science Foundation of China (No. 56675133); the National Basic Research Program (973) of China (No. 2006CB705401)
Rights and permissions
About this article
Cite this article
Dong, Wp., Chen, J. & Li, Wj. Flow stress model of stainless steel 0Cr13Ni5Mo at elevated temperature. J. Shanghai Jiaotong Univ. (Sci.) 13, 717–720 (2008). https://doi.org/10.1007/s12204-008-0717-0
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12204-008-0717-0