Design of compensation pixel circuit with In-Zn-O thin film transistor for active-matrix organic light-emitting diode 3D display
- 53 Downloads
This paper presents a new compensation pixel circuit suitable for active-matrix organic light-emitting diode (AMOLED) stereoscopic three dimensional (3D) displays with shutter glasses. The simultaneous emission method was used to solve the crosstalk problem, in which the periods of initialization and threshold voltage detection occur for each pixel of whole panel simultaneously. Furthermore, there was no need of the periods of initialization and threshold voltage detection from the second frame beginning by employing threshold voltage one-time detection method. The non-uniformity of the proposed pixel circuit was considerably low with an average value of 8.6% measured from 20 discrete proposed pixel circuits integrated by In-Zn-O thin film transistors (IZO TFTs). It was shown that the OLED current almost remains constant for the number of frames up to 70 even the threshold voltage detection period only exists in the first frame.
Keywordsactive-matrix organic light-emitting diode (AMOLED) compensation pixel circuit three dimensional (3D) display simultaneous emission
Unable to display preview. Download preview PDF.
This work was supported in part by the National Key Basic Research and Development Program of China (973 Program, No. 2015CB655004) founded by Ministry of Science and Technology, in part by the National Natural Science Foundation of China (Grant Nos. 61574062, 61574061 and 61204089), in part by Science and Technology Program of Guangdong Province (Nos. 2015B090914003, 2015B090915001, 2014B090916002 and 2014B090915004).
- 1.Dawson R M A, Shen Z, Furst D A, Connor S, Hsu J, Kane M G, Stewart R G, Ipri A, King C N, Green P J, Flegal R T, Pearson S, Barrow W A, Dickey E, Ping K, Robinson S, Tang C W, Van Slyke S, Chen F, Shi J, Lu M H, Sturm J C. The impact of the transient response of organic light emitting diodes on the design of active matrix OLED displays. International Electron Devices Meeting, IEDM, Technical Digest, 1998, 168(3): 875–878Google Scholar