Abstract
The aim of this paper is to develop a simulation model of large deformation problems following a semi-analytical method, incorporating the complications of geometric and material non-linearity in the formulation. The solution algorithm is based on the method of energy principle in structural mechanics, as applicable for conservative systems. A one-dimensional solid circular bar problem has been solved in post-elastic range assuming linear elastic, linear strain hardening material behaviour. Type of loading includes uniform uniaxial loading and gravity loading due to body force, whereas the geometry of the bar is considered to be non-uniformly taper. Results are validated successfully with benchmark solution and some new results have also been reported. The location of initiation of elasto-plastic front and its growth are found to be functions of geometry of the bar and loading conditions. Some indicative results have been presented for static and dynamic problems and the solution methodology developed for one-dimension has been extended to the elasto-plastic analysis of two-dimensional strain field problems of a rotating disk.
Similar content being viewed by others
References
Abdalla H F, Megahed M M, Younan M Y A 2006 A simplified technique for shakedown limit load determination. Nuclear Eng. and Design 237: 1231–1240
Chaudhuri S R 2008 Change in instantaneous eigen properties due to yielding of a structure. J. Sound Vib. 312: 754–768
Eraslan A N 2002 Inelastic deformations of rotating variable thickness solid disks by Tresca and Von Mises criteria. Int. J. Comput. Eng. Sci. 3: 89–101
Gadala M S, Wang J 1998 ALE formulation and its application in solid mechanics. Computer Methods in Appl. Mech. and Eng. 167(1): 33–55
Gang C, Yinghua L, Bingye X 2003 Plastic limit load analysis of defective pipelines. Acta Mechanica Solida Sinica 16(2): 102–109
Gerstmayr J, Irschik H 2003 Vibrations of the elasto-plastic pendulum. Int. J. Non-Linear Mech. 38:111–122
Heller B, Kleiner M 2006 Semi-analytical process modelling and simulation of air bending. The Journal of Strain Analysis for Engineering Design 41(1): 57–80
Hill R 1950 The mathematical theory of plasticity (Oxford: Oxford university Press)
Holland D V, Virgin L N, Plaut R H 2008 Large deflections and vibration of a tapered cantilever pulled at its tip by a cable. J. Sound Vib. 310: 433–441
Kim Y J, Oh C K, Myung M S, Park J M 2006 Fully plastic analyses for notched bars and plates using finite element limit analysis. Eng. Fract. Mech. 73: 1849–1864
Mattes H S C, Chimissot F E G 1997 Necking of elasto-plastic rods under tension. Int. J. Non-Linear Mech. 32(6): 1077–1086
Owen D R J, Hinton E 1980 Finite elements in plasticity: Theory and practice (UK: Pineridge Press Limited)
Reddy J N 1984 Energy and variational methods in applied mechanics (USA: John Wiley & Sons)
Reddy J N 2005 An introduction to non-linear finite element analysis (Oxford: Oxford University Press)
Saha K N, Misra D, Ghosal S, Pohit G 2005 Nonlinear free vibration analysis of square plates with various boundary conditions. J. Sound Vib. 287: 1031–1044
Shames I H, Dym C L 1995 Energy and finite element methods in structural mechanics (India: New Age International Publishers Limited, First Edition)
Yankelevsky D Z 1999 Elastic-plastic behaviour of a shallow two bar truss. Int. J. Mech. Sci. 41: 663–675
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Das, D., Sahoo, P. & Saha, K. Elasto-plastic strain analysis by a semi-analytical method. Sadhana 33, 403–432 (2008). https://doi.org/10.1007/s12046-008-0027-0
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12046-008-0027-0