Abstract
To promote flow-induced orientation and reserve the formation of the shish-kebab structure, a modified injection-moulding technology named water-assisted injection moulding (WAIM), was applied to provide twice the shear flow and a rapid cooling rate on high-molecular weight high-density polyethylene (HDPE) melt in a mould cavity. Large-scale distribution of highly oriented shish-kebab was successfully achieved in a WAIM sample with a high-molecular weight. More importantly, the high-orientation degree of lamellae (larger than 0.4) in the thickness direction for a high-molecular weight WAIM sample is >60%, which is much more than a conventional injection-moulded sample (15%). This work provides a new insight to achieve injection-moulded products with enhanced oriented structures.
References
Liu Z, Liu X, Zheng G, Dai K, Liu C, Shen C et al 2017 Polym. Test. 58 227
Liu X, Dai K, Hao X, Zheng G, Liu C, Schubert D et al 2013 Ind. Eng. Chem. Res. 52 11996
Pan Y, Guo X, Zheng G, Liu C, Chen Q, Shen C et al 2018 Macromol. Mater. Eng. 303 1800083
Cao W, Wang K, Zhang Q, Du R and Fu Q 2006 Polymer 47 6857
Geng L, Li L, Mi H, Chen B, Sharma P, Ma H et al 2017 ACS Appl. Mater. Interfaces 9 21071
Pan Y, Liu X, Shi S, Liu C, Dai K, Yin R et al 2016 Macromol. Mater. Eng. 301 1468
Li L, Li W, Geng L, Chen B, Mi H, Hoong K et al 2018 Chem. Eng. J. 348 546
Jiang J, Liu X, Lian M, Pan Y, Chen Q, Liu H et al 2018 Polym. Test. 67 183
Kuang T, Li K, Chen B and Peng X 2017 Composites, Part B 123 112
Liu X, Lian M, Pan Y, Wang X, Zheng G, Liu C et al 2018 Macromol. Mater. Eng. 303 1700465
Wang X, Pan Y, Qin Y, Voigt M, Liu X, Zheng G et al 2018 Polym. Test. 69 478
Liu X, Pan Y, Zheng G, Liu H, Chen Q, Dong M et al 2018 Macromol. Mater. Eng. 303 1800035
Liu X, Pan Y, Peng C, Hao X, Zheng G, Liu C et al 2016 Mater. Lett. 172 19
Liu X, Zheng G, Jia Z, Li S, Liu C, Zhang Y et al 2012 J. Appl. Polym. Sci. 125 2297
Zheng G, Jia Z, Liu X, Liu B, Zhang X, Dai K et al 2012 Polym. Eng. Sci. 52 725
Liu X, Zheng G, Dai K, Jia Z, Li S, Liu C et al 2011 J. Mater. Sci. 46 7830
Picken S, Aerts J, Visser R and Northolt M 1990 Macromolecules 23 3849
Zhu P and Edward G 2004 Macromolecules 37 2658
Liu X, Pan Y, Zheng G and Liu C 2016 RSC Adv. 6 68969
Liu Z, Liu X, Zheng G, Dai K, Liu C and Shen C 2015 J. Mater. Sci. 50 599
Lu Z, Pan Y, Liu X, Zheng G, Schubert D W and Liu C 2018 Mater. Lett. 221 62
Liang S, Yang H, Wang K, Zhang Q and Fu Q 2008 Polymer 56 50
Shao Y, Yang Z, Deng B, Yin B and Yang H 2018 Polymer 140 188
Luo F, Liu X, Shao C, Zhang J, Shen C and Guo Z 2018 Mater. Des. 144 25
Dou R, Shao Y, Li S, Yin B and Yang M 2016 Polymer 83 34
Liu X, Krückel J, Zheng G and Schubrt D 2014 Compos. Sci. Technol. 100 99
Qu M, Nilsson F, Qin Y, Yang G, Pan Y, Liu X et al 2017 Compos. Sci. Technol. 150 24
Liu X, Pan Y, Zheng G and Schubrt D 2016 Compos. Sci. Technol. 128 1
Liu X, Krückel J, Zheng G and Schubrt D 2013 ACS Appl. Mater. Interfaces 5 8857
Pan Y, Liu X, Kaschta J, Hao X, Liu C and Schubert D 2017 Polymer 113 34
Xu H, Zhong G, Fu Q, Lei J, Jiang W, Hsiao B et al 2012 ACS Appl. Mater. Interfaces 4 6774
Acknowledgements
This work was supported by the Opening Project of Jiangxi Province Key Laboratory of Polymer Micro/Nano Manufacturing and Devices as well as by the HASTIT of Henan Province, China.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yuan, H., Pan, Y. & Liu, X. Large-scale formation of shish-kebab in water-assisted injection-moulded high-density polyethylene with a high-molecular weight. Bull Mater Sci 42, 40 (2019). https://doi.org/10.1007/s12034-018-1729-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s12034-018-1729-5