Abstract
This paper summarizes the comparison of a new tin-coated copper (t-coating Cu) mesh electrode with a graphite plate electrode for potential power generation and biocompatibility in a microbial fuel cell (MFC). The study, which used domestic wastewater, demonstrated that t-coating Cu mesh electrode produced a power density (271 mW/m2) approximately three times higher than that produced by a graphite electrode (87 mW/m2). Scanning electron microscopy (SEM) results revealed that bacterial morphology on the two electrodes significantly varied. The t-coating Cu mesh electrode surface had higher bacterial diversity because the open three-dimensional macro-mesh structure allowed an excellent electro-biofilm attachment. Kinetic performances evaluated using the Nernst–Monod equation demonstrated that the t-coating Cu mesh electrode had both higher power density and good biocompatibility in a large surface area, high chemical stability, and favorable metallic conductivity.
Similar content being viewed by others
References
Li, J., Liu, C., Liao, Q., Zhu, X., & Ye, D. (2013). International Journal of Hydrogen Energy, 38, 15723–15729.
Ahn, Y., & Logan, B. E. (2010). Bioresource Technology, 101, 469–475.
Ye, D., Yang, Y., Li, J., Zhu, X., Liao, Q., Deng, B., & Chen, R. (2013). International Journal of Hydrogen Energy, 38, 15710–15715.
Hays, S., Zhang, F., & Logan, B. E. (2011). Journal of Power Sources, 196, 8293–8300.
Timmers, R. A., Strik, D. P., Hamelers, H. V., & Buisman, C. J. (2013). Biomass and Bioenergy, 51, 60–67.
Pocaznoi, D., Calmet, A., Etcheverry, L., Erable, B., & Bergel, A. (2012). Energy Environmental Science, 5, 9645–9652.
Guerrini, E., Cristiani, P., Grattieri, M., Santoro, C., Li, B., & Trasatti, S. (2014). Journal of the Electrochemical Society, 161, H62–H67.
Michaelidou, U., ter Heijne, A., Euverink, G. J. W., Hamelers, H. V., Stams, A. J., & Geelhoed, J. S. (2011). Applied and Environmental Microbiology, 77, 1069–1075.
Taskan, E., Hasar, H., & Ozkaya, B. (2013). Applied Mechanics and Materials, 404, 371–376.
Zhu, X., & Logan, B. E. (2013). Journal of Chemical Technology and Biotechnology, 89, 471–474.
Videla, H. A., & Herrera, L. K. (2009). International Biodeterioration and Biodegradation, 63, 896–900.
Chen, S., Brown, L., Levendorf, M., Cai, W., Ju, S.-Y., Edgeworth, J., Li, X., Magnuson, C. W., Velamakanni, A., & Piner, R. D. (2011). ACS Nano, 5, 1321–1327.
Singh Raman, R., Chakraborty Banerjee, P., Lobo, D. E., Gullapalli, H., Sumandasa, M., Kumar, A., Choudhary, L., Tkacz, R., Ajayan, P. M., & Majumder, M. (2012). Carbon, 50, 4040–4045.
Krishnamurthy, A., Gadhamshetty, V., Mukherjee, R., Chen, Z., Ren, W., Cheng, H., & Koratkar, N. (2013). Carbon, 56, 45–49.
Song, T., Xu, Y., Ye, Y., Chen, Y., & Shen, S. (2009). Journal of Chemical Technology and Biotechnology, 84, 356–360.
Kato Marcus, A., Torres, C. I., & Rittmann, B. E. (2007). Biotechnology and Bioengineering, 98, 1171–1182.
Leung, K. M., Wanger, G., El-Naggar, M. Y., Gorby, Y., Southam, G., Lau, W. M., & Yang, J. (2013). Nano Letters, 13, 2407–2411.
El-Naggar, M. Y., Gorby, Y. A., Xia, W., & Nealson, K. H. (2008). Biophysical Journal, 95, L10–L12.
Gorby, Y. A., Yanina, S., McLean, J. S., Rosso, K. M., Moyles, D., Dohnalkova, A., Beveridge, T. J., Chang, I. S., Kim, B. H., & Kim, K. S. (2006). Proceedings of the National Academy of Sciences, 103, 11358–11363.
El-Naggar, M. Y., Wanger, G., Leung, K. M., Yuzvinsky, T. D., Southam, G., Yang, J., Lau, W. M., Nealson, K. H., & Gorby, Y. A. (2010). Proceedings of the National Academy of Sciences, 107, 18127–18131.
Ringeisen, B. R., Ray, R., & Little, B. (2007). Journal of Power Sources, 165, 591–597.
Kim, H. J., Park, H. S., Hyun, M. S., Chang, I. S., Kim, M., & Kim, B. H. (2002). Enzyme and Microbial Technology, 30, 145–152.
Kim, H., Hyun, M., Chang, I., & Kim, B. H. (1999). Journal of Microbiology and Biotechnology, 9, 365–367.
Pham, C. A., Jung, S. J., Phung, N. T., Lee, J., Chang, I. S., Kim, B. H., Yi, H., & Chun, J. (2003). FEMS Microbiology Letters, 223, 129–134.
Park, H. S., Kim, B. H., Kim, H. S., Kim, H. J., Kim, G. T., Kim, M., Chang, I. S., Park, Y. K., & Chang, H. I. (2001). Anaerobe, 7, 297–306.
Gödeke, J., Paul, K., Lassak, J., & Thormann, K. M. (2011). The ISME Journal, 5, 613–626.
Malvankar, N. S., & Lovley, D. R. (2012). Chemical Sustainable Chemical, 5, 1039–1046.
Morita, M., Malvankar, N. S., Franks, A. E., Summers, Z. M., Giloteaux, L., Rotaru, A. E., Rotaru, C., & Lovley, D. R. (2011). MBio, 2, e00159–00111.
Fredrickson, J. K., Romine, M. F., Beliaev, A. S., Auchtung, J. M., Driscoll, M. E., Gardner, T. S., Nealson, K. H., Osterman, A. L., Pinchuk, G., & Reed, J. L. (2008). Nature Reviews Microbiology, 6, 592–603.
Mathis, B., Marshall, C., Milliken, C., Makkar, R., Creager, S., & May, H. (2008). Applied Microbiology and Biotechnology, 78, 147–155.
Jung, S., & Regan, J. M. (2007). Applied Microbiology and Biotechnology, 77, 393–402.
Call, D. F., & Logan, B. E. (2011). Biosensors and Bioelectronics, 26, 4526–4531.
Watson, V. J., & Logan, B. E. (2010). Biotechnology and Bioengineering, 105, 489–498.
Min, B., & Logan, B. E. (2004). Environmental Science and Technology, 38, 5809–5814.
Catal, T., Xu, S., Li, K., Bermek, H., & Liu, H. (2008). Biosensors and Bioelectronics, 24, 849–854.
Feng, Y., Wang, X., Logan, B. E., & Lee, H. (2008). Applied Microbiology and Biotechnology, 78, 873–880.
Acknowledgments
This paper includes a part of Ph.D thesis data of Ergin Taskan. The authors gracefully acknowledge the financial support from FUBAP, Project Number MF. 12.10.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Taskan, E., Hasar, H. Comprehensive Comparison of a New Tin-Coated Copper Mesh and a Graphite Plate Electrode as an Anode Material in Microbial Fuel Cell. Appl Biochem Biotechnol 175, 2300–2308 (2015). https://doi.org/10.1007/s12010-014-1439-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12010-014-1439-4