Abstract
In this study, a strategy to reduce enzyme dosage is evaluated by applying two post-treatments, oxygen delignification and mechanical refining. The sugar conversion for GL12 substrates was increased from 51.5% to 77.9% with post-treatments at the enzyme dosage of 10 FPU. When the amount of enzyme was reduced to 5 FPU with post-treatments, the conversion of 71.8% was obtained, which was significant higher than the conversion without any post-treatment using 10 FPU (51.5%). This clearly demonstrates the benefit of post-treatments that allows more than 50% of enzyme reduction at the same level of enzymatic conversion. Enzyme-accessible surface area and pore volume were evaluated by Simons' staining and DSC thermoporometry methods, and strong correlations were found with the sugar conversion.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.References
Bennington, C., & Pineault, I. (1999). Mass transfer in oxygen delignification systems: mill survey results, analysis and interpretation. Pulp & Paper Canada, 100, 123–131.
Brown, R. C. (2003). Biorenewable resources: engineering new products from agriculture. ed. Wiley.
Cara, C., Ruiz, E., Oliva, J., Sáez, F., & Castro, E. (2008). Conversion of olive tree biomass into fermentable sugars by dilute acid pretreatment and enzymatic saccharification. Bioresource Technology, 99, 1869–1876.
Chandra, R., Bura, R., Mabee, W., Berlin, A., Pan, X., & Saddler, J. (2007). Substrate pretreatment: the key to effective enzymatic hydrolysis of lignocellulosics? Biofuels, 67–93.
Chandra, R., Ewanick, S., Hsieh, C., & Saddler, J. (2008). The characterization of pretreated lignocellulosic substrates prior to enzymatic hydrolysis, part 1: a modified Simons' staining technique. Biotechnology Progress, 24, 1178–1185.
Chang, V. S., Nagwani, M., Kim, C. H., & Holtzapple, M. T. (2001). Oxidative lime pretreatment of high-lignin biomass. Applied Biochemistry and Biotechnology, 94, 1–28.
Dence, C. and Reeve, D. (1996). Pulp bleaching: principles and practice. ed. TAPPI Atlanta, GA.
Elander, R., Dale, B., Holtzapple, M., Ladisch, M., Lee, Y., Mitchinson, C., et al. (2009). Summary of findings from the Biomass Refining Consortium for Applied Fundamentals and Innovation (CAFI): corn stover pretreatment. Cellulose, 16, 649–659.
Esteghlalian, A., Bilodeau, M., Mansfield, S., & Saddler, J. (2001). Do enzymatic hydrolyzability and Simons' stain reflect the changes in the accessibility of lignocellulosic substrates to cellulase enzymes? Biotechnology Progress, 17, 1049–1054.
Galbe, M., & Zacchi, G. (2007). Pretreatment of lignocellulosic materials for efficient bioethanol production. BioFuels, 108, 41–65.
Gil, N., Gil, C., Amaral, M., Costa, A., & Duarte, A. (2009). Use of enzymes to improve the refining of a bleached Eucalyptus globulus kraft pulp. Biochemical Engineering Journal, 46, 89–95.
Ji, Y., Wheeler, M., & van Heiningen, A. (2007). Oxygen delignification kinetics: CSTR and batch reactor comparison. AICHE Journal, 53, 2681–2687.
Jin, Y., Jameel, H., Chang, H., & Phillips, R. (2010). Green liquor pretreatment of mixed hardwood for ethanol production in a repurposed kraft pulp mill. Journal of Wood Chemistry and Technology, 30, 86–104.
Johansson, E., & Ljunggren, S. (1994). The kinetics of lignin reactions during oxygen bleaching. IV. The reactivities of different lignin model compounds and the influence of metal ions on the rate of degradation. Journal of Wood Chemistry and Technology, 14, 507–525.
Kerekes, R. (2005). Characterizing refining action in PFI mills. Tappi J, 4.
Lee, S., Teramoto, Y., & Endo, T. (2009). Enzymatic saccharification of woody biomass micro/nanofibrillated by continuous extrusion process I—effect of additives with cellulose affinity. Bioresource Technology, 100, 275–279.
Lee, S., Teramoto, Y., & Endo, T. (2010). Enhancement of enzymatic accessibility by fibrillation of woody biomass using batch-type kneader with twin-screw elements. Bioresource Technology, 101, 769–774.
Lindström, T. (1989). Fundamentals of papermaking. London: Mechanical Engineering Publisher.
Mansfield, S., Mooney, C., & Saddler, J. (1999). Substrate and enzyme characteristics that limit cellulose hydrolysis. Biotechnology Progress, 15, 804–816.
Mooney, C., Mansfield, S., Touhy, M., & Saddler, J. (1998). The effect of initial pore volume and lignin content on the enzymatic hydrolysis of softwoods. Bioresource Technology, 64, 113–119.
NREL. (2008). Determination of structural carbohydrates and lignin in biomass, Laboratory Analytical Procedure (LAP). ed. US Department of Energy, National Renewable Energy Laboratory, Golden, CO.
Pan, X., Gilkes, N., Kadla, J., Pye, K., Saka, S., Gregg, D., et al. (2006). Bioconversion of hybrid poplar to ethanol and co-products using an organosolv fractionation process: optimization of process yields. Biotechnology and Bioengineering, 94, 851–861.
Pan, X., Zhang, X., Gregg, D., & Saddler, J. (2004). Enhanced enzymatic hydrolysis of steam-exploded Douglas fir wood by alkali-oxygen post-treatment. Applied Biochemistry and Biotechnology, 115, 1103–1114.
Park, S., Venditti, R., Jameel, H., & Pawlak, J. (2006). Changes in pore size distribution during the drying of cellulose fibers as measured by differential scanning calorimetry. Carbohydrate Polymers, 66, 97–103.
Silverstein, R. A. (2004). A comparison of chemical pretreatment methods for converting cotton stalks to ethanol. USA: Master of Science, North Carolina State University.
Sjöström, E. (1993). Wood chemistry: fundamentals and applications. ed. Academic Pr.
Stephanopoulos, G. (2007). Challenges in engineering microbes for biofuels production. Science, 315, 801.
Stone, J., Scallan, A., Donefer, E., & Ahlgren, E. (1969). Digestibility as a simple function of a molecule of similar size to a cellulase enzyme. Advances in Chemistry Series, 95, 219–241.
Sun, Y., & Cheng, J. (2002). Hydrolysis of lignocellulosic materials for ethanol production: a review. Bioresource Technology, 83, 1–11.
TAPPI, T. (2004) 248 sp-00, Laboratory beating of pulp (PFI mill method). TAPPI test methods.
Wang, G., Pan, X., Zhu, J., Gleisner, R., & Rockwood, D. (2009). Sulfite pretreatment to overcome recalcitrance of lignocellulose (SPORL) for robust enzymatic saccharification of hardwoods. Biotechnology Progress, 25, 1086–1093.
Wu, S., Chang, H., Jameel, H., & Philips, R. (2010). Novel green liquor pretreatment of loblolly pine chips to facilitate enzymatic hydrolysis into fermentable sugars for ethanol production. Journal of Wood Chemistry and Technology, 30, 205–218.
Wyman, C. E., Dale, B. E., Elander, R. T., Holtzapple, M., Ladisch, M. R., & Lee, Y. Y. (2005). Coordinated development of leading biomass pretreatment technologies. Bioresource Technology, 96, 1959–1966.
Yu, X., & Atalla, R. (1998). A staining technique for evaluating the pore structure variations of microcrystalline cellulose powders. Powder Technology, 98, 135–138.
Zhang, J., Song, H., Lin, L., Zhuang, J., Pang, C., & Liu, S. (2010). Microfibrillated cellulose from bamboo pulp and its properties. Biomass and Bioenergy.
Zhu, J., Wang, G., Pan, X., & Gleisner, R. (2009). Specific surface to evaluate the efficiencies of milling and pretreatment of wood for enzymatic saccharification. Chemical Engineering Science, 64, 474–485.
Acknowledgments
This work was supported by the National Research Foundation of Korea Grant funded by the Korean Government [NRF-2009-352-F00021] and Wood-to-Ethanol Research Consortium at North Carolina State University.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Koo, BW., Treasure, T.H., Jameel, H. et al. Reduction of Enzyme Dosage by Oxygen Delignification and Mechanical Refining for Enzymatic Hydrolysis of Green Liquor-Pretreated Hardwood. Appl Biochem Biotechnol 165, 832–844 (2011). https://doi.org/10.1007/s12010-011-9301-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12010-011-9301-4