Abstract
Intumescent coatings employ the heat barrier effect of an expanded char in the fire protection of the underlying substrates. The effectiveness of an intumescent system is dependent on the strength and ability of the char to remain intact upon exposure to fire. Many approaches have been employed to measure the strength of the intumescent char, but there still remains the need for an established standard procedure. In the present study, the compressive strengths of reinforced and unreinforced intumescent chars are evaluated using the compression test for cellular materials (ASTM 1162 00). This standard procedure enabled easy evaluation of compressive strength by employing the principle of deformation force as a function of the axial displacement of char under an active load by using the common universal tensile testing machine. The force–deformation graph revealed an exponentially increasing curve with two distinct regions, an initial region of low force to high deformation representing the collapse of the cellular pores and a high-force–low-deformation region attributed to the bulk mass effect of the compressed char. The results showed that the force needed to compress a bauxite residue-reinforced char to 10% deformation increased by 59%, while the compression strength increased by 13.08% over the control char.
Similar content being viewed by others
References
Puri, RG, Khanna, AS, "Intumescent Coatings: A Review on Recent Progress," J. Coat. Technol. Res., 14 (1) 1–20 (2016).
Mariappan, T, ”Recent Developments of Intumescent Fire Protection Coatings for Structural Steel: A Review,” J. Fire Sci., 34 120–163 (2016).
Kandola, BK, Luangtriratana, P, Duquesne, S, Bourbigot, S, "The Effects of Thermophysical Properties and Environmental Conditions on Fire Performance of Intumescent Coatings on Glass Fibre-Reinforced Epoxy Composites," Materials, 8 5216–5237 (2015).
Gardelle, B, Duquesne, S, Vandereecken, P, Bourbigot, S, “Characterization of the Carbonization Process of Expandable Graphite/Silicone Formulations in a Simulated Fire,” Poly. Degrad. Stab., 98 (5) 1052–1063 (2013).
Marosi, Gy, Marton, A, Szep, A, Csontos, I, Keszei, S, Zimonyi, E, Toth, A, Almeras, X, Le Bras, M, “Fire Retardancy Effect of Migration in Polypropylene Nanocomposites Induced by Modified Interlayer,” Poly. Degrad. Stab., 82 (2) 379–385 (2003).
Jimenez, M, Duquesne, S, Bourbigot, S, "Multiscale Experimental Approach for Developing High-Performance Intumescent Coatings," Ind. Eng. Chem. Res., 45 4500–4508 (2006).
Muller, M, Bourbigot, S, Duquesne, S, Klein, RA, Giannini, G, Lindsay, CI, “Measurement and Investigation of Intumescent Char Strength: Application to Polyurethane,” J. Fire Sci., 31(4) 293–308 (2013).
Pimenta, JT, Goncalves, C, Hiliou, L, Coelho, JFJ, Magalhaes, FD, “Effect of Binder on Performance of Intumescent Coatings,” J. Coat. Technol. Res., 13 227–238 (2015).
Ullah, S, Ahmad, F, Megat-Yuso, P, Binti Azmi, NH, "A Study of Bonding Mechanism of Expandable Graphite Based Intumescent Coating on Steel Substrate," J. Appl. Sci., 11 1630–1635 (2011).
Amir, N, Ahmad, F, Megat-Yusoff, P, "Study on the Fibre Reinforced Epoxy-Based Intumescent Coating Formulations and Their Char Characteristics," J. Appl. Sci., 11 1678–1687 (2011).
Green, JD, Allen, W, Taylor, AP, "Intumescent Coating Compositions." Ed: Google Patents, 2007.
Kreh, RP, "Intumescent Mesh Coating." Ed: Google Patents, 2016.
Yuan, Y, Ma, C, Shi, Y, Song, L, Hu, Y, Hu, W, “Highly-Efficient Reinforcement and Flame Retardancy of Rigid Polyurethane Foam with Phosphorus-Containing Additive and Nitrogen-Containing Compound,” Mater. Chem. Phys., 211 42–53 (2018).
Xue, Y, Zhang, S, Yang, W, "Influence of Expanded Vermiculite on Fire Protection of Intumescent Fireproof Coatings for Steel Structures," J. Coat. Technol. Res., 12 357–364 (2015).
Ahmad, F, Yusoff, PSMBM, Zia-ul-Mustafa, M, "Effect of Kaolin Clay and Alumina on Thermal Performance and Char Morphology of Intumescent Fire Retardant Coating." In MATEC Web of Conferences, 2014
Ullah, S, Ahmad, F, Shariff, A, Raza, MR, Masset, PJ, "The Role of Multi-wall Carbon Nanotubes in Char Strength of Epoxy Based Intumescent Fire Retardant Coating," J. Anal. Appl. Pyrolysis, 124 149–160 (2017).
Zia-ul-Mustafa, M, Ahmad, F, Ullah, S, Amir, N, Gillani, QF, "Thermal and Pyrolysis Analysis of Minerals Reinforced Intumescent Fire Retardant Coating," Prog. Org. Coat., 102 201–216 (2017).
Ullah, S, Ahmad, F, "Effects of Zirconium Silicate Reinforcement on Expandable Graphite Based Intumescent Fire Retardant Coating," Poly. Degrad. Stab., 103 4962 (2014).
Aziz, H, Ahmad, F, Zia-ul-Mustafa, M, "Effect of Titanium Oxide on Fire Performance of Intumescent Fire Retardant Coating," In: Advanced Materials Research, Vol. 935, pp. 224–228, Trans Tech Publications Ltd (2014).
Horrocks, AR, Anand, SC, Hill, BJ, "Fire and Heat Resistant Materials." Ed: Google Patents, 1997.
Amir, N, Roslan, MH, Ahmad, F, "Fire Resistance of Glass Wool and Rockwool Hybrid Fibre Reinforced Intumescent Coating," J. Adv. Res. Mater. Sci., 1 24–32 (2015).
Reshetnikov, IS, Yablokova, MY, Potapova, EV, Khalturinskij, NA, Chernyh, VY, Mashlyakovskii, LN, "Mechanical Stability of Intumescent Chars," J. Appl. Polym. Sci., 67 1827–1830 (1998).
Naik, AD, Duquesne, S, Bourbigot, S, "Hydrocarbon Time–Temperature Curve Under Airjet Perturbation: An In Situ Method to Probe Char Stability and Integrity in Reactive Fire Protection Coatings," J. Fire Sci., 34 385–397 (2016).
Nørgaard, KP, Dam-Johansen, K, Català, P, Kiil, S, "Investigation of Char Strength and Expansion Properties of an Intumescent Coating Exposed to Rapid Heating Rates," Prog. Org. Coat., 76 1851–1857 (2013).
Jimenez, M, Duquesne, S, Bourbigot, S, "Characterization of the Performance of an Intumescent Fire Protective Coating," Surf. Coat. Technol., 201 979–987 (2006).
Reshetnikov, IS, Garashchenko, AN, Strakhov, VL, "Experimental Investigation into Mechanical Destruction of Intumescent Chars," Polym. Adv. Technol., 11 392–397 (2000).
ASTM D1621, Standard Test Method for Compressive Properties of Rigid Cellular Plastics, American Society for Testing and Materials, New York (2010).
Bureau, MN, Champagne, MF, Gendron, R, "Impact–Compression–Morphology Relationship in Polyolefin Foams," J. Cell. Plast., 41 73–85 (2005).
da Silva, VR, Mosiewicki, MA, Yoshida, MI, da Silva, MC, Stefani, PM, Marcovich, NE, "Polyurethane Foams Based on Modified Tung Oil and Reinforced with Rice Husk Ash II: Mechanical Characterization," Polym. Test., 32 665–672 (2013).
Jimenez, M, Duquesne, S, Bourbigot, S, "High-Throughput Fire Testing for Intumescent Coatings," Ind. Eng. Chem. Res., 45 7475–7481 (2006).
Arogundade, AI, Megat-Yusoff, PSMB, Ahmad, F, Bhat, AH, “Ball Milled Bauxite Residue as a Reinforcing Filler in Phosphate-Based Intumescent System,” Metall. Mater. Eng. Assoc. Metall. Eng. Ser., AMES, 38 353–362, (2017).
Wagh, AS, “An Overview of Chemical Processes to Manufacture Red-Mud Construction Products,” Int. Semin. Bauxite Residue (Red Mud), 36 235 (2011).
Acknowledgments
The authors would like to acknowledge the support of the technologist at Mechanical Engineering Department, University Technology Petronas, for equipment usage, guidance, and help with experimentation.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Arogundade, A.I., Megat-Yussof, P.S.M. & Afolabi, L.O. Evaluation of compression strength of intumescent char using ASTM 1162 00. J Coat Technol Res 18, 935–943 (2021). https://doi.org/10.1007/s11998-020-00434-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11998-020-00434-0