Texier, A, Azema, A, “Open Air Metal—Outdoor Metallic Sculpture from the 19th to the Early 20th Century: Identification, Conservation, Restoration.” Int. Conf. 2014 SF-IIC/ICOMOS, p 288, Paris (2015)
Pilz, M, Römich, H, “Sol–Gel Derived Coating for Outdoor Bronze Conservation.” J. Sol-Gel Sci. Technol., 8 1071–1075 (1997). https://doi.org/10.1007/BF02436986
Google Scholar
Brunoro, G, Frignani, A, Colledan, A, Chiavari, C, “Organic Films for Protection of Copper and Bronze Against Acid Rain Corrosion.” Corros. Sci., 45 2219–2231 (2003). https://doi.org/10.1016/S0010-938X(03)00065-9
Article
Google Scholar
Kosec, T, Legat, A, Milošev, I, “The Comparison of Organic Protective Layers on Bronze and Copper.” Prog. Org. Coat., 69 199–206 (2010). https://doi.org/10.1016/J.PORGCOAT.2010.04.010
Article
Google Scholar
Chiavari, C, Balbo, A, Bernardi, E, Martini, C, Bignozzi, MC, Abbottoni, M, Monticelli, C, “Protective Silane Treatment for Patinated Bronze Exposed to Simulated Natural Environments.” Mater. Chem. Phys., 141 502–511 (2013). https://doi.org/10.1016/J.MATCHEMPHYS.2013.05.050
Article
Google Scholar
Floch, V, Doleyres, Y, Amand, S, Aufray, M, Pébère, N, Verchère, D, “Adherence Measurements and Corrosion Resistance in Primer/Hot-Dip Galvanized Steel Systems.” J. Adhes., 89 339–357 (2013). https://doi.org/10.1080/00218464.2013.757510
Article
Google Scholar
Olivier, MG, Romano, AP, Vandermiers, C, Mathieu, X, Poelman, M, “Influence of the Stress Generated During an Ageing Cycle on the Barrier Properties of Cataphoretic Coatings.” Prog. Org. Coat., 63 323–329 (2008). https://doi.org/10.1016/j.porgcoat.2008.01.018
Article
Google Scholar
Le Manchet, S, Landoulsi, J, Richard, C, Verchère, D, “Study of a Chromium-Free Treatment on Hot-Dip Galvanized Steel: Electrochemical Behaviour and Performance in a Saline Medium.” Surf. Coat. Technol., 205 475–482 (2010). https://doi.org/10.1016/j.surfcoat.2010.07.009
Article
Google Scholar
Miszczyk, A, Darowicki, K, “Multispectral Impedance Quality Testing of Coil-Coating System Using Principal Component Analysis.” Prog. Org. Coat., 69 330–334 (2010). https://doi.org/10.1016/j.porgcoat.2010.07.003
Article
Google Scholar
Bajat, JB, Popić, JP, Mišković-Stanković, VB, “The Influence of Aluminium Surface Pretreatment on the Corrosion Stability and Adhesion of Powder Polyester Coating.” Prog. Org. Coat., 69 316–321 (2010). https://doi.org/10.1016/j.porgcoat.2010.07.004
Article
Google Scholar
Ramezanzadeh, B, Attar, MM, “An Evaluation of the Corrosion Resistance and Adhesion Properties of an Epoxy-Nanocomposite on a Hot-Dip Galvanized Steel (HDG) Treated by Different Kinds of Conversion Coatings.” Surf. Coat. Technol., 205 4649–4657 (2011). https://doi.org/10.1016/j.surfcoat.2011.04.001
Article
Google Scholar
Akid, R, Gobara, M, Wang, H, “Corrosion Protection Performance of Novel Hybrid Polyaniline/Sol-Gel Coatings on an Aluminium 2024 Alloy in Neutral, Alkaline and Acidic Solutions.” Electrochim. Acta, 56 2483–2492 (2011). https://doi.org/10.1016/j.electacta.2010.12.032
Article
Google Scholar
Bull, SJ, Berasetegui, EG, “Chapter 7: An Overview of the Potential of Quantitative Coating Adhesion Measurement by Scratch Testing.” Tribol. Int., 39 99–114 (2006). https://doi.org/10.1016/j.triboint.2005.04.013
Article
Google Scholar
Mittal, KL, “Adhesion Measurement of Thin Films.” Electrocompon. Sci. Technol., 3 21–42 (1976). https://doi.org/10.1155/APEC.3.21
Article
Google Scholar
Brown, SD, “Adherence Failure and Measurement: Some Troubling Questions.” In: Mittal, KL (ed.) Adhesion Measurement of Films and Coatings, pp. 15–39. VSP, Utrecht (1995)
Google Scholar
I. 20502 Standard, Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics)—Determination of Adhesion of Ceramic Coatings by Scratch Testing, 2005
Noh, SM, Lee, JW, Nam, JH, Park, JM, Jung, HW, “Analysis of Scratch Characteristics of Automotive Clearcoats Containing Silane Modified Blocked Isocyanates via Carwash and Nano-scratch Tests.” Prog. Org. Coat., 74 192–203 (2012). https://doi.org/10.1016/j.porgcoat.2011.12.009
Article
Google Scholar
Malzbender, J, den Toonder, JMJ, Balkenende, AR, de With, G, “Measuring Mechanical Properties of Coatings: A Methodology Applied to Nano-particle-Filled Sol–Gel Coatings on Glass.” Mater. Sci. Eng. R Rep., (2002). https://doi.org/10.1016/s0927-796x(01)00040-7
Google Scholar
I. 1518-1 Standard, Paints and Varnishes—Determination of Scratch Resistance—Part 1: Constant-Loading Method (2011)
I. 1518-2 Standard, 2011 Paints and Varnishes—Determination of Scratch Resistance—Part 2: Variable-Loading Method (2011)
Vaughn, GD, Frushour, BG, Dale, WC, “Scratch Indentation, A Simple Adhesion Test Method for Thin Films on Polymeric Supports.” J. Adhes. Sci. Technol., 8 635–650 (1994). https://doi.org/10.1163/156856194X00393
Article
Google Scholar
Matthews, KHA, Coatings Tribology, Volume 56: Properties, Mechanisms, Techniques and Applications in Surface Engineering, 2nd ed. Elsevier Science, Amsterdam (2009)
Google Scholar
Roche, AA, Dole, P, Bouzziri, M, “Measurement of the Practical Adhesion of Paint Coatings to Metallic Sheets by the Pull-Off and Three-Point Flexure Tests.” J. Adhes. Sci. Technol., 8 587–609 (1994). https://doi.org/10.1163/156856194X00366
Article
Google Scholar
Genty, S, Sauvage, J-B, Tingaut, P, Aufray, M, “Experimental and Statistical Study of Three Adherence Tests for an Epoxy-Amine/Aluminum Alloy System: Pull-Off, Single Lap Joint and Three-Point Bending tests.” Int. J. Adhes. Adhes., 79 50–58 (2017). https://doi.org/10.1016/j.ijadhadh.2017.09.004
Article
Google Scholar
Roche, AA, Behme, AK, Solomon, JS, “A Three-Point Flexure Test Configuration for Improved Sensitivity to Metal/Adhesive Interfacial Phenomena.” Int. J. Adhes., 2 249–254 (1982). https://doi.org/10.1016/0143-7496(82)90032-X
Article
Google Scholar
Zucchi, F, Grassi, V, Frignani, A, Trabanelli, G, “Inhibition of Copper Corrosion by Silane Coatings.” Corros. Sci., 46 2856–2865 (2004). https://doi.org/10.1016/j.corsci.2004.03.019
Article
Google Scholar
Monticelli, C, Grassi, V, Martini, C, Chiavari, C, Mavilia, G, Zanotto, F, Masi, G, Bernardi, E, “Protectiveness of Different Silane Coatings on Patinated Ancient and Modern Bronzes: Part 1.” In: EUROCORR 2017 20th ICC Process Saf. Congr. 2017, Eur. Fed. Corros. Event No. 417, Prague (Czech Republic), 2017: p. Paper n. 82171
Masi, G, Martini, C, Bernardi, E, Bignozzi, MC, Monticelli, C, Balbo, A, Zanotto, F, Aufray, M, Josse, C, Esvan, J, Robbiola, L, “Protectiveness of Different Silane Coatings on Patinated Ancient and Modern Bronzes: Part 2.”, In: EUROCORR 2017 20th ICC Process Saf. Congr. 2017, Eur. Fed. Corros. Event No. 417, Prague (Czech Republic), 2017 Paper n. 95722
Bescher, E, Mackenzie, JD, “Sol–Gel Coatings for the Protection of Brass and Bronze.” J. Sol-Gel Sci. Technol., 26 1223–1226 (2003)
Article
Google Scholar
Ebnesajjad, S, “Applied Plastics Engineering Handbook.” In: Kutz, M (ed.) Applied Plastics Engineering Handbook. Elsevier Inc., Amsterdam (2011) https://doi.org/10.1016/c2010-0-67336-6
Google Scholar
Picard, L, Phalip, P, Fleury, E, Ganachaud, F, “Chemical Adhesion of Silicone Elastomers on Primed Metal Surfaces: A Comprehensive Survey of Open and Patent Literatures.” Prog. Org. Coat., 80 120–141 (2015). https://doi.org/10.1016/j.porgcoat.2014.11.022
Article
Google Scholar
Marabelli, M, Napolitano, G, “Nuovi sistemi protettivi applicabili su opere o manufatti in bronzo esposti all’aperto TT—New Protective Systems Applied to Outdoor Bronze Statuary or Artifacts.” Materiali e Strutture, 1–2 51–58 (1991)
Google Scholar
Weil, PD, “A review of the history and practice of patination.” In: Floyd Brown, B, N.B. of S. United States. (Eds.), Corros. Met. Artifacts a Dialog between Conservators. Archaeologists and Corrosion, pp. 77–92. Scientists, NBS Special Publication 479, Washington D.C. (1977)
Masi, G, Josse, C, Esvan, J, Chiavari, C, Bernardi, E, Martini, C, Bignozzi, MC, Monticelli, C, Zanotto, F, Balbo, A, Svara Fabjan, E, Kosec, T, Robbiola, L, “Evaluation of the Protectiveness of an Organosilane Coating on Patinated Cu–Si–Mn Bronze for Contemporary Art.” Prog. Org. Coat., 127 286–299 (2019). https://doi.org/10.1016/j.porgcoat.2018.11.027
Article
Google Scholar
Chiavari, C, Bernardi, E, Martini, C, Passarini, F, Ospitali, F, Robbiola, L, “The Atmospheric Corrosion of Quaternary Bronzes: The Action of Stagnant Rain Water.” Corros. Sci., 52 3002–3010 (2010). https://doi.org/10.1016/j.corsci.2010.05.013
Article
Google Scholar
Chiavari, C, Bernardi, E, Balbo, A, Monticelli, C, Raffo, S, Bignozzi, MC, Martini, C, “Atmospheric Corrosion of Fire-Gilded Bronze: Corrosion and Corrosion Protection During Accelerated Ageing Tests.” Corros. Sci., 100 435–447 (2015). https://doi.org/10.1016/J.CORSCI.2015.08.013
Article
Google Scholar
Sidot, E, Kahn-Harari, A, Cesari, E, Robbiola, L, “The Lattice Parameter of α-Bronzes as a Function of Solute Content: Application to Archaeological Materials.” Mater. Sci. Eng. A, 393 147–156 (2005). https://doi.org/10.1016/J.MSEA.2004.10.001
Article
Google Scholar
Ropret, P, Kosec, T, “Raman Investigation of Artificial Patinas on Recent Bronze—Part I: Climatic Chamber Exposure.” J. Raman Spectrosc., 43 1578–1586 (2012). https://doi.org/10.1002/jrs.4068
Article
Google Scholar
Masi, G, Esvan, J, Josse, C, Chiavari, C, Bernardi, E, Martini, C, Bignozzi, MC, Gartner, N, Kosec, T, Robbiola, L, “Characterisation of Typical Patinas Simulating Bronze Corrosion in Outdoor Conditions.” Mater. Chem. Phys., 200 308–321 (2017). https://doi.org/10.1016/j.matchemphys.2017.07.091
Article
Google Scholar
Deanin, RD, Orroth, SA, Eliasen, RW, Greer, TN, “Mechanism of Ultraviolet Degradation and Stabilization in Plastics.” Polym. Eng. Sci., 10 228–234 (1970). https://doi.org/10.1002/pen.760100408
Article
Google Scholar
Khramov, AN, Voevodin, NN, Balbyshev, VN, Donley, MS, “Hybrid Organo-Ceramic Corrosion Protection Coatings with Encapsulated Organic Corrosion Inhibitors.” Thin Solid Films, 447–448 549–557 (2004). https://doi.org/10.1016/j.tsf.2003.07.016
Article
Google Scholar
Khramov, AN, Voevodin, NN, Balbyshev, VN, Mantz, RA, “Sol–Gel-Derived Corrosion-Protective Coatings with Controllable Release of Incorporated Organic Corrosion Inhibitors.” Thin Solid Films, 483 191–196 (2005). https://doi.org/10.1016/j.tsf.2004.12.021
Article
Google Scholar
Monticelli, C, Grassi, V, Mavilia, G, Zanotto, F, “Entrapment of Corrosion Inhibitors in Silane Coatings to Improve Bronze Corrosion Protection.” In: EUROCORR 2017 20th ICC Process Saf. Congr. 2017, Eur. Fed. Corros. Event No. 417, Prague (Czech Republic), 2017 Paper n. 82386
Bernardi, E, Chiavari, C, Lenza, B, Martini, C, Morselli, L, Ospitali, F, Robbiola, L, “The Atmospheric Corrosion of Quaternary Bronzes: The Leaching Action of Acid Rain.” Corros. Sci., 51 159–170 (2009). https://doi.org/10.1016/J.CORSCI.2008.10.008
Article
Google Scholar