Abstract
Pigmented (TiO2), amino resin crosslinked coatings, designed for applications in can coatings’ internal lacquers, were formulated, characterized, applied, and cured. Three grades of a pigmentary form of TiO2 were characterized in terms of their particle size, their particle morphology, their zeta potential, and their moisture retention behavior. Epoxy coatings that were crosslinked using one of several, different amino crosslinkers were prepared. The effect of the presence of the TiO2 pigments on the hydrolysis of the cured coatings was monitored via the controlled retorting of the coatings. The different grades of TiO2 pigment were selected, to establish whether or not they could be used interchangeably with respect to hydrolysis and to melamine release. Also, the effects of the aging of the fluid coatings on the amount of melamine released from the coatings (after curing and retorting) were monitored. Storage under laboratory conditions for 2, 20, and 40 weeks was used for this purpose. The TiO2 pigment contributed significantly to the hydrolysis behavior of the epoxy coatings in that their presence substantially reduced the amount of melamine released and the extent of crosslinker hydrolysis. Typical results show that excluding the TiO2 pigment particles from the formulation results in there being 50% more hydrolysis of the crosslinker to melamine. With respect to the melamine release and crosslinker hydrolysis, the different grades of the pigment gave similar results.
References
Magami, SM, Guthrie, JT, “Amino Resin Cross-linked Can Coatings.” Surf. Coat. Int., 95 (2) 64–73 (2012)
Oldring, PKT, Nehring, U, Packaging Materials 7. Metal Packaging for Foodstuffs. ILSI Europe, Belgium (2007)
Arellano, M, Michel-Hacisi, I, Feke, DL, Monas-Zloczower, IM, “Compatibilization of Titanium Dioxide Powders with Non-polar Media: Adsorption of Anionic Surfactants and Its Influence on Dispersion Stability.” J. Coat. Technol., 68 (857) 103–112 (1996)
Braun, JH, “Titanium Dioxide—A Review.” J. Coat. Technol., 69 (868) 59–72 (1997)
Al-Turaif, HA, “Effect of Nano TiO2 Particle Size on Mechanical Properties of Cured Epoxy Resin.” Prog. Org. Coat., 69 (3) 241–246 (2010)
Rout, MTK, Sengupta, DK, “Electrokinetics of TiO2 in the Interpretation of Its Dispersion Characteristics.” Surf. Coat. Int., 83 (12) 592–596 (2000)
Reck, E, Richards, M, “Titanium Dioxide-Manufacture, Environment and Life Cycle Analysis, the Trioxide Experience.” Surf. Coat. Int., 80 (12) 568–572 (1997)
Ahmad, S, Ashraf, SM, Kumar, GS, Hasnat, A, Sharmin, E, “Studies on Epoxy-Butylated Melamine Formaldehyde-Based Anticorrosive Coatings from a Sustainable Resource.” Prog. Org. Coat., 56 (2–3) 207–213 (2006)
Schaefer, A, Mass, S, Simat, TJ, Steinhart, H, “Migration from Can Coatings: Part 1. A Size-Exclusion Chromatographic Method for the Simultaneous Determination of Overall Migration and Migrating Substances Below 1000 Da.” Food Addit. Contam., 21 (3) 287–301 (2004)
Magami, SM, “The Science and Technology of Can Coatings.” Surf. Coat. Int., 95 (3) 139–142 (2012)
Bradley, EL, Castle, L, Day, J, Leak, J, “Migration of Melamine from Can Coatings Cross-Linked with Melamine-Based Resins, into Food Simulants and Foods.” Food Addit. Contam., 28 (2) 243–250 (2011)
Sheen, S, Yang, S, Jun, K, Choi, M, “One-Step Flame Method for the Synthesis of Coated Composite Nanoparticles.” J. Nanopart. Res., 11 (7) 1767–1775 (2009)
European Commission, Institute for Health and Consumer Protection, “Nanomaterials in Food Packaging: Keeping Food Fresh for Longer, Less Waste.” http://ihcp.jrc.ec.europa.eu/our_activities/nanotechnology/Nano_Food/nanomaterials-in-food/?searchterm=None. Accessed August 05, 2013
Brown, WH, Organic Chemistry, 7th ed. Cengage Learning Publishers, London (2013)
Jonesa, FN, Chua, G, Samaraweera, U, “Recent Studies of Self-condensation and Co-condensation of Melamine-Formaldehyde Resins; Cure at Low Temperatures.” Prog. Org. Coat., 24 (1–4) 189–208 (1994)
European Union, “Commission Regulation (EU) No 1282/2011 of 28 November 2011 Amending and Correcting Commission Regulation (EU) No 10/2011 on Plastic Materials and Articles Intended to Come into Contact with Food.” Off. J. Eur. Union, L328 22–29 (2011)
Hosseinpour, D, Guthrie, JT, Berg, JC, Stolarski, VL, “The Interfacial Interaction Contribution to the Mechanical Properties of Automotive Topcoats.” Prog. Org. Coat., 54 (3) 182–187 (2005)
Hosseinpour, D, Guthrie, JT, Berg, JC, Stolarski, VL, “Effect of the Pigment–Polymer Interactions on the Mechanical Performance of Automotive Topcoat Layers.” J. Appl. Polym. Sci., 101 268–2261 (2006)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Magami, S.M., Oldring, P.K.T., Castle, L. et al. The effect of TiO2, pigmentation on the hydrolysis of amino resin crosslinked epoxy can coatings. J Coat Technol Res 11, 1013–1022 (2014). https://doi.org/10.1007/s11998-014-9610-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11998-014-9610-y