Abstract
In this study, 3-glycidoxypropiltrimethoxysilane was used as an adhesion promoter to enhance the adhesion strength of epoxy coating on an aluminum (Al) substrate. Silane layer drying temperature was investigated as a factor that has an influence on the adhesion of polymeric coating on metal substrate and also on its performance in wet and corrosive environments. FTIR tests were carried out to study Al/silane interactions. Drying the silane layer at high temperatures formed a condensed siloxane layer that improved the bonding strength as well as the performance of the protective coating in corrosive environments. The highest dry and wet pull-off strengths were obtained at drying temperatures of 100 and 125°C, respectively.
References
Chen, H, Wang, J, Huo, Q, “Self-Assembled Monolayer of 3-Aminopropyltrimethoxysilane for Improved Adhesion Between Aluminum Alloy Substrate and Polyurethane Coating.” Thin Solid Films, 515 7181–7189 (2007)
Bajat, JB, Milošev, I, Jovanović, Ž, Mišković-Stanković, VB, “Studies on Adhesion Characteristics and Corrosion Behaviour of Vinyltriethoxysilane/Epoxy Coating Protective System on Aluminium.” Appl. Surf. Sci., 256 3508–3517 (2010)
Liu, XF, Wu, QY, Wang, HG, “Effect of Surface Modifications and Environment on the Interfacial Adhesion of Polymer/Aluminum Alloy.” Mater. Sci. Eng. A, 483–484 683–687 (2008)
Naderi Zand, B, Mahdavian, M, “Corrosion and Adhesion Study of Polyurethane Coating on Silane Pretreated Aluminum.” Surf. Coat. Technol., 203 1677–1681 (2009)
Jovanović, Ž, Bajat, JB, Jančić-Heinemann, RM, Dimitrijević, M, Mišković-Stanković, VB, “Methacryloxypropyltrimethoxysilane Films on Aluminium: Electrochemical Characteristics, Adhesion and Morphology.” Prog. Org. Coat., 66 393–399 (2009)
Zhu, D, Van Ooji, WJ, “Corrosion Protection of AA 2024-T3 by Bis-[3-(triethoxysilyl)propyl]tetrasulfide in Sodium Chloride Solution: Part 2: Mechanism for Corrosion Protection.” Corros. Sci., 45 2177–2197 (2003)
Palanivel, V, Huang, Y, Van Ooij, WJ, “Effects of Addition of Corrosion Inhibitors to Silane Films on the Performance of AA2024-T3 in a 0.5 M NaCl Solution.” Prog. Org. Coat., 53 153–168 (2005)
Zhu, D, Van Ooji, WJ, “Enhanced Corrosion Resistance of AA 2024-T3 and Hot-Dip Galvanized Steel Using a Mixture of Bis-[triethoxysilylpropyl]tetrasulfide and Bis-[trimethoxysilylpropyl]amine.” Electrochim. Acta, 49 1113–1125 (2004)
Chico, B, de la Fuente, D, Pérez, ML, Morcillo, M, “Corrosion Resistance of Steel Treated With Different Silane/Paint Systems.” J. Coat. Technol. Res., 9(1) 3–13 (2012)
Ch, Wu, Zhang, J, “Corrosion Protection of Mg Alloys by Cathodic Electrodeposition Coating Pretreated With Silane.” J. Coat. Technol. Res., 7(6) 727–735 (2010)
Zhu, D, Van Ooji, WJ, “Corrosion Protection of Metals by Water-Based Silane Mixtures of Bis-[trimethoxysilylpropyl]amine and Vinyltriacetoxysilane.” Prog. Org. Coat., 49 42–53 (2004)
Bajat, JB, Popić, JP, Mišković-Stanković, VB, “The Influence of Aluminium Surface Pretreatment on the Corrosion Stability and Adhesion of Powder Polyester Coating.” Prog. Org. Coat., 69 316–321 (2010)
Mohagheghi, S, Hatefi, A, Kianvash, A, “The Effect of Phosphoric Acid Anodizing Variations on Al/Epoxy Adhesion Strength.” Surf. Eng. (2013)
Hatefi, A, Mohagheghi, S, Kianvash, A, “Improvement of an Epoxy Coating Adhesion by Forming an Anodized Al Oxide (AAO) Thin Layer Containing Nano Pores on Al Substrate.” In: 3rd International Conference on Ultrafine Grained and Nanostructured Materials, Tehran, Iran, Nov 2011
Mohagheghi, S, Hatefi, A, Kianvash, A, “Effect of Anodizing Electrolyte Temperature on Al/Epoxy Bonding Strength.” In: 1st New and Advanced Material International Congress, Isfahan, Iran, May 2012
Abel, ML, Allington, RD, Digby, RP, Porritt, N, Shaw, SJ, Watts, JF, “Understanding the Relationship Between Silane Application Conditions, Bond Durability and Locus of Failure.” Int. J. Adhes. Adhes., 26 2–15 (2006)
Gandhi, JS, Metroke, TL, Eastman, MA, Van Ooij, WJ, Apblett, A, “Effect of the Degree of Hydrolysis and Condensation of Bis-[triethoxysilylpropyl]tetrasulfide on the Corrosion Protection of Coated Aluminum Alloy 2024-T3.” Corrosion, 62 612–623 (2006)
Díaz-Benito, B, Velasco, F, Pantoja, M, “Mechanical Properties of Polyester Films Painted After Silanization of 6063 Aluminium Alloy With Different Pretreatment Conditions.” Prog. Org. Coat., 70 287–292 (2011)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hatefi, A., Mohagheghi, S. & Kianvash, A. The effect of silane layer drying temperature on epoxy coating adhesion on silane-pretreated aluminum substrate. J Coat Technol Res 10, 743–747 (2013). https://doi.org/10.1007/s11998-013-9492-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11998-013-9492-4