Abstract
Crosslinking reactions involving epoxy homopolymerization of 100% biobased epoxidized sucrose esters (ESEs) were studied and the resulting coatings properties were compared against epoxidized soybean oil (ESO) and petrochemical-based soybean fatty acid ester resins. The low viscosity of ESE resins allowed for formulations to be developed with minimal volatile organic content. ESEs were found to have superior coatings properties, compared to ESO and the petrochemical-based soybean esters, attributable to a higher glass transition temperature (T g) and a higher modulus. The rigid sucrose core on ESEs provided an increase in coating performance when compared to coatings from epoxidized resins synthesized with tripentaeryithritol as a core. The degree of conversion and optimization of the curing conditions were studied using differential scanning calorimetry (DSC). Thermal analysis of cured coatings was performed using DSC, dynamic mechanical analysis, and thermogravimetric analysis. In order to further enhance the coatings properties, small amounts of bisphenol A epoxy resin were added which resulted in higher moduli and T gs.
Access this article
We’re sorry, something doesn't seem to be working properly.
Please try refreshing the page. If that doesn't work, please contact support so we can address the problem.
Similar content being viewed by others
References
Xia, Y, Larock, RC, “Vegetable Oil-Based Polymeric Materials: Synthesis, Properties, and Applications.” Green Chem., 12 (11) 1893–1909 (2010)
Petrović, ZS, “Polyurethanes from Vegetable Oils.” Polym. Rev., 48 (1) 109–155 (2008)
Pan, X, Webster, DC, “Impact of Structure and Functionality of Core Polyol in Highly Functional Biobased Epoxy Resins.” Macromol. Rapid Commun., 32 (17) 1324–1330 (2011)
Pan, X, Sengupta, P, Webster, DC, “High Biobased Content Epoxy-Anhydride Thermosets from Epoxidized Sucrose Esters of Fatty Acids.” Biomacromolecules, 12 (6) 2416–2428 (2011)
Alemdar, N, Erciyes, AT, Yagci, Y, “Styrenation of Triglyceride Oil by Nitroxide Mediated Radical Polymerization.” Prog. Org. Coat., 66 (2) 99–106 (2009)
Alemdar, N, Erciyes, AT, Yagci, Y, “Styrenation of Air-Blown Linseed Oil by Nitroxide-Mediated Radical Polymerization.” Prog. Org. Coat., 67 (1) 55–59 (2010)
Lu, J, Wool, RP, “Additive Toughening Effects on New Bio-based Thermosetting Resins from Plant Oils.” Compos. Sci. Technol., 68 (3–4) 1025–1033 (2008)
Pan, X, Nelson, TJ, Webster, DC, “Novel Biobased Dual-Cure Coating System.” Prog. Org. Coat., 73 (4) 344–354 (2012)
Pan, X, Sengupta, P, Webster, DC, “Novel Biobased Epoxy Compounds: Epoxidized Sucrose Esters of Fatty Acids.” Green Chem., 13 (4) 965–975 (2011)
Yuan, SC, “High Solids Epoxy Resin Primer Compositions.” US20060079637A1, 2006
Morio, K, Murase, H, Tsuchiya, H, Endo, T, “Thermoinitiated Cationic Polymerization of Epoxy Resins by Sulfonium Salts.” J. Appl. Polym. Sci., 32 (7) 5727–5732 (1986)
Corrigan, PJ, U.S. Patent No. 6,995,232, 2003
Montserrat, S, Cima, I, “Isothermal Curing of an Epoxy Resin by Alternating Differential Scanning Calorimetry.” Thermochim. Acta, 330 (1–2) 189–200 (1999)
Petrovic, ZS, “Polyurethanes from Vegetable Oils.” Polym. Rev., 48 109–155 (2008)
Acknowledgments
The authors would like to thank the United Soybean Board for funding under project numbers 1420 and 2420.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Nelson, T.J., Galhenage, T.P. & Webster, D.C. Catalyzed crosslinking of highly functional biobased epoxy resins. J Coat Technol Res 10, 589–600 (2013). https://doi.org/10.1007/s11998-013-9488-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11998-013-9488-0