Abstract
Polyamide 6 (PA6) nanofibers were prepared via electrospinning. The electrospun PA6 nanofibers were functionalized using electroless deposition technique. Oxygen low temperature plasma treatment was applied to substitute the conventional roughening process using concentrated sulfuric acid-potassium dichromate. The deposition of copper (Cu) on the PA6 nanofibers was characterized using scanning electron microscopy (SEM), atomic force microscopy (AFM), and energy dispersive X-ray spectroscopy (EDX). The observations revealed the uniform coating of the PA6 nanofibers with thin films of Cu. It was also found that the surface conductivity of the PA6 nanofibers was significantly improved by the Cu deposition. The combination of electrospinning and electroless deposition will provide a new approach to producing the functional nanofibers for various applications.
References
Doshi J, Reneker, DH, “Electrospinning process and applications of electrospun fibers.”. Journal of Electrostatics, 35:151–160 (1995)
Reneker DH, Chun, I, “Nanometre diameter fibers of polymer produced by electrospinning.”. Nanotechnology, 7:216–223 (1996)
Wei QF, Huang, FL, Hou, DY, Wang, YY, “Surface functionalisation of polymer nanofibres by sputter coating of titanium dioxide.”. Appl. Surf. Sci., 252:7874–7877 (2006)
Pinto NJ, Carrión, P, Quiñones, JX, “Electroless deposition of nickel on electrospun fibers of 2-acrylamido-2-methyl-1-propanesulfonic acid doped polyaniline.”. Materials Science and Engineering A, 366:1–5 (2004)
Arai S, Endo, M, Hashizume, S, Shimojima, Y, “Nickel-coated carbon nanofibers prepared by electroless deposition.”. Electrochemistry Communications, 6:1029–1031 (2004)
Choi SS, Lee, YS, Joo, CW, Lee, SG, Park, JK, Han, KS, “Electrospun PVDF nanofiber web as polymer electrolyte or separator.”. Electrochimica Acta, 50:339–343 (2004)
Gan X, Wu, Y, Liu, L, Shen, B, Hu, W, “Electroless copper plating on PET fabrics using hypophosphite as reducing agent.”. Surface and Coatings Technology, 201:7018–7023 (2007)
Wei QF, Gao, WD, Hou, DY, Wang, XQ, “Surface modification of polymer nanofibres by plasma treatment“. Appl. Surf. Sci., 245:16–20 (2005)
Seidel C, Kopf, H, Gotsmann, B, Vieth, T, Fuchs, H, Reihs, K, “Ar plasma treated and Al metallised polycarbonate: a XPS, mass spectroscopy and SFM study.”. Appl. Surf. Sci., 150:19–33 (1999)
Acknowledgments
The research was supported by the specialized Research Fund for the Doctoral Program of higher education (No. 20060295005) and the Program for New Century Excellent Talents in University (NCET-06-0485).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Tao, D., Wei, Q., Cai, Y. et al. Functionalization of polyamide 6 nanofibers by electroless deposition of copper. J Coat Technol Res 5, 399–403 (2008). https://doi.org/10.1007/s11998-008-9118-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11998-008-9118-4