Determining Shelf Life of Ready-to-Eat Macaroni and Cheese in High Barrier and Oxygen Scavenger Packaging Sterilized via Microwave-Assisted Thermal Sterilization
Ready-to-eat macaroni and cheese filled in novel oxygen scavenger and metal oxide–coated high-barrier polymer packages were processed in pilot scale 915-MHz microwave-assisted thermal sterilization system (MATS). Also, aluminum foil packages were processed in Allpax retort system to compare packaging performance. Physicochemical and sensory attributes of macaroni and cheese packaged in different oxygen and water vapor transmission rates were evaluated and stored for 6 months at 37.8 °C. Findings showed oxygen transmission rate (OTR) increase by 2–7 times and water vapor transmission rate (WVTR) increase by 2.5–24 times after MATS processing. OTR of polymeric packaging had no significant effect on vitamin A and vitamin E, shear force, and food color. Comparable results between polymeric and aluminum foil packaging were observed throughout the shelf life. This indicates that oxygen scavenger and high-barrier packaging with OTRs ~ 0.03–0.34 cc/m2 day and WVTRs ~ 0.62–7.19 g/m2 day can be used for ready-to-eat meals with extended shelf life for soldiers and astronauts.
KeywordsOxygen scavenger packaging Oxygen transmission rate Water vapor transmission rate Vitamin A Vitamin E Shelf life
The authors would like to thank Dr. Zhongwei Tang for his technical help. In addition, the authors would like to thank Kuraray America, Inc. (Houston, TX, USA), Toppan Printing Co, LTD. (Japan) and Mitsubishi Chemical Corporation (Japan) for providing the packaging materials.
This work was supported by the USDA National Institute of Food and Agriculture Research grants #2016-67017-24597 and #2016-68003-24840, and Hatch project #1016366.
Compliance with Ethical Standards
Conflict of Interest
The authors declare that they have no conflict of interest.
- Dhawan, S., Varney, C., Barbosa-Cánovas, G. V., Tang, J., Selim, F., & Sablani, S. S. (2014). The impact of microwave-assisted thermal sterilization on the morphology, free volume, and gas barrier properties of multilayer polymeric films. Journal of Applied Polymer Science, 131(12), 40376, 1–8.Google Scholar
- Frankel, E. N. (2012). Lipid oxidation. 2nd Edition: Cambridge, UK: Woodhead Publishing Limited.Google Scholar
- Holdsworth, S. D., Simpson, R., & Barbosa-Cánovas, G. V. (2008). Thermal processing of packaged foods (Vol. 284). New York: Springer.Google Scholar
- Pascall, M. A., & Han, J. H. (2018). Packaging for nonthermal processing of food. 2nd Edition: Hoboken, NJ: Wiley-Blackwell.Google Scholar
- Robertson, G. L. (2005). Food packaging: principles and practice. 2nd Edition: Boca Raton, FL: CRC Press.Google Scholar
- Sonar, C., Paccola, C., Al-Ghamdi, S., Rasco, B., Tang, J., & Sablani, S. S. (2019). Stability of color, β-carotene, and ascorbic acid in thermally pasteurized carrot puree to the storage temperature and gas barrier properties of selected packaging films. Journal of Food Process Engineering, 42(4), e13074, 1–2Google Scholar
- Wilson, N., & Shah, N. (2007). Microencapsulation of vitamins. ASEAN Food Journal, 14(1), 1.Google Scholar
- Zhang, H., Bhunia, K., Kuang, P., Tang, J., Rasco, B., Mattinson, D. S., & Sablani, S. S. (2016a). Effects of oxygen and water vapor transmission rates of polymeric pouches on oxidative changes of microwave-sterilized mashed potato. Food and Bioprocess Technology, 9(2), 341–351.CrossRefGoogle Scholar
- Zhang, H., Bhunia, K., Munoz, N., Li, L., Dolgovskij, M., Rasco, B., Tang, J., & Sablani, S. S. (2017). Linking morphology changes to barrier properties of polymeric packaging for microwave-assisted thermal sterilized food. Journal of Applied Polymer Science, 134(44), 45481, 1–10.Google Scholar
- Zhang, H., Patel, J., Bhunia, K., Al-Ghamdi, S., Sonar, C., Ross, C., et al. (2019). Color, vitamin C, β-carotene and sensory quality retention in microwave-assisted thermally sterilized sweet potato puree: effects of polymeric package gas barrier during storage. Food Packaging and Shelf Life, (21), 100324, 1–9.Google Scholar