Abstract
Vacuum frying has gained a significant strategic importance for future fried food manufacturing since, due to the low-temperature processing, significant benefits such as the improvement of fried product safety and quality can be obtained. So far, all studies have focused on agricultural products, such as potatoes, which are already structured by nature, but none of them has included fabricated products. This imposes a challenge since minimum conditions must be ensured to form structure during processing. The objective of this work was to understand the role of water boiling point (T bp) and processing temperature (T oil) in structure formation, oil absorption, and most important quality attributes of starch-based products during vacuum frying. Fabricated products were made of a reconstituted blend of gluten (12 % d.b.) and wheat starch (88 % d.b.) in order to accurately control ingredients proportion. Samples were fried varying the T bp from 38 to 71 °C while keeping a thermal driving force of 70 °C (i.e., T oil − T bp = 70 °C). Another set of samples was fried varying the thermal driving force from 37 to 70 °C while maintaining a T bp of 71 °C. Results showed that a higher T bp favored the capacity of the matrix to form structure due to starch gelatinization in the presence of water and temperature, reducing the oil content of the fried products. This was confirmed by scanning electron microphotographs. Results were consistent with textural measurements that showed a higher breaking force as the processing pressure increased (i.e., T bp), which was inversely related to oil absorption (R 2 = 0.92). In accordance, this study allows understanding the effect of vacuum level in structure development and oil absorption in vacuum-fried products when different food building blocks (gluten and wheat starch) are combined.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
AOAC, Assoc. Official Analytical Chemists. (1995). Official methods of analysis (16th ed.). Washington, DC: Association of Official Analytical Chemists.
Bouchon, P. (2009). Understanding oil absorption during deep-fat frying. In Taylor (Ed.), Advances in food and nutrition research. London, UK: Academic Press Elsevier Science.
Bouchon, P., & Pyle, D. (2004). Studying oil absorption in restructured potato chips. Journal of Food Science, 69, 115–122.
Da Silva, P., & Moreira, R. (2008). Vacuum frying of high-quality fruit and vegetable-based snacks. Lebensmittel Wissenchraft Technologie, 41, 1758–1767.
Dueik, V., & Bouchon, P. (2011). Vacuum frying as a route to produce novel snacks with desired quality attributes according to new health trends. Journal of Food Science, 76, E188–E195.
Dueik, V., Robert, P., & Bouchon, P. (2010). Vacuum frying reduces oil uptake and improves the quality parameters of carrot crisps. Food Chemistry, 119, 1143–1149.
Eliasson, A., & Gudmundsson, M. (1996). Starch: physicochemical and functional aspects. In Eliasson (Ed.), Carbohydrates in food. New York: Marcel Dekker.
Fukuoka, M., Ohta, K., & Watanabe, H. (2002). Determination of the terminal extent of starch gelatinization in a limited water system by DSC. Journal of Food Engineering, 53, 39–42.
Gamble, M., & Rice, P. (1987). Effect of pre-fry drying on oil uptake and distribution in potato crisp manufacture. Journal of Food Science and Technology, 22, 535–548.
Garayo, J., & Moreira, R. (2002). Vacuum frying potato chips. Journal of Food Engineering, 55, 181–191.
Gazmuri, A., & Bouchon, P. (2009). Analysis of wheat gluten and starch matrixes during deep-fat frying. Food Chemistry, 115, 999–1005.
Gebhardt, B. (1996). Oils and fats in snack foods. In Hui (Ed.), Bailey’s Industrial Oil and Fat Products (5th ed., Vol. 3). New York: Wiley.
Granda, C., Moreira, R., & Tichy, S. (2004). Reduction of acrylamide formation in potato chips by low-temperature vacuum frying. Journal of Food Science, 69, 405–411.
Jenkins, P., & Donald, A. (1998). Gelatinisation of starch: a combined SAXS/WAXS/DSC and SANS study. Carbohydrate Research, 308, 133–147.
Kawas, M., & Moreira, R. (2001). Effect of degree of starch gelatinization on quality attributes of fried tortilla chips. Journal of Food Science, 66, 300–306.
Kocchar, S. (1999). Safety and reliability during frying operations—effects of detrimental components and fryer design features. In Boskou & Elmadfa (Eds.), Frying of food. Lancaster, Pa: Technomic Publishing.
Krokida, M., Oreopoulou, V., Maroulis, Z., & Marinos-Kouris, D. (2001). Effect of pre-treatment on viscoelastic behavior of potato strips. Journal of Food Engineering, 50, 11–17.
Lamberg, I., Hallstrom, B., & Olsson, H. (1990). Fat uptake in a potato drying/frying process. Lebensmittel Wissenchraft Technologie, 23, 295–300.
Mariscal, M., & Bouchon, P. (2008). Comparison between atmospheric and vacuum frying of apple slices. Food Chemistry, 107, 1561–1569.
Marquez, G., & Anon, M. (1986). Influence of reducing sugars and amino acids in the colour development of fried potatoes. Journal of Food Science, 51, 157–160.
Moreira, R., Castell-Perez, M., & Barrufet, M. (1999). Deep-fat frying: fundamental and applications. Gaithersburg: Aspen publication, Inc.
Nonaka, M., Sayre, R., & Weaver, M. (1977). Oil content of French fries as affected by blanch temperatures, fry temperatures and melting point of frying oils. American Potato Journal, 54, 151–159.
Rizvi, A., & Tong, C. (1997). Fractional conversion for determining texture degradation kinetics of vegetables. Journal of Food Science, 62, 1–7.
Rossell, B. (2001). Factors affecting the quality of frying oils and fats: improving quality. Frying: improving quality. England: Woodhead Publishing Limited.
Shyu, S., & Hwang, L. (2001). Effects of processing conditions on the quality of vacuum fried apple chips. Food Research International, 34, 133–142.
Shyu, S., Hau, L., & Hwang, L. (1998). Effect of vacuum frying on the oxidative stability of oils. Journal of the American Oils Chemical Society, 75, 1393–1398.
Varela, G. (1988). Current facts about the frying of food. In Varela, Bender, & Morton (Eds.), Frying of food: principles, changes, new approaches. Chichester: Ellis Horwood.
Yam, K., & Papadakis, S. (2004). A simple digital imaging method for measuring and analyzing colour of food surfaces. Journal of Food Engineering, 61, 137–142.
Acknowledgment
The authors appreciate the financial support from FONDECYT project number 1100851 and the Faculty of Engineering at Pontificia Universidad Católica de Chile during the postdoctoral fellowship program of Dr. Sobukola.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sobukola, O.P., Dueik, V. & Bouchon, P. Understanding the Effect of Vacuum Level in Structure Development and Oil Absorption in Vacuum-Fried Wheat Starch and Gluten-Based Snacks. Food Bioprocess Technol 6, 2010–2017 (2013). https://doi.org/10.1007/s11947-012-0899-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11947-012-0899-1