Abstract
This paper presents a numerical analysis of a material test program investigating the crack opening properties of fibre reinforced concrete (FRC) round determinate panels (RDP). The objective of this research is to set up a modified RDP test method to improve the current ASTM C1550 test method for FRC and fibre reinforced shotcrete (FRS) composite. By this test method, a kind of light small-diameter panels are applied and more crack information can be obtained by a new rotation angle measuring technique. It is shown that this modified test method can be used to effectively evaluate the crack opening resistance of FRC. The finite element analysis was then performed to clarify the crack propagations and failure mode of FRC RDP panels. It helps establish a reasonable theoretical method to predict the structural response of RDP, combining with this modified testing technique.
Similar content being viewed by others
References
Japanese Society of Civil Engineers. JSCE-G552, Test Method for Bending Strength and Bending Toughness of Steel Fiber Reinforced Concrete[S]. Tokyo: JSCE, 1983.
Japanese Society of Civil Engineers. JSCE-SF4, Method of Test for Flexural Strength and Flexural Toughness of SFRS[S]. Tokyo: JSCE, 1984.
European Federation of National Associations of Specialist Contractors and Material Suppliers for the Construction Industry. European Specification for Sprayed Concrete[S]. Aldershot: EFNARC, 1996.
American Society for Testing and Materials. ASTM C-1018, Standard Test Method for Flexural Toughness and First-Crack Strength of Fibre-Reinforced Concrete (Using Beam with Third-Point Loading)[S]. West Conshohocken, ASTM, 1997.
Bernard E S, Pircher M. Influence of Geometry on performance of Round Determinate Panels made with Fibre Reinforced Concrete[R]. Nepean, School of Civil Engineering and Environment, University of Western Sydney, 2000: 21–38.
Bernard E S. Behaviour of Round Steel Fibre Reinforced Concrete Panels under Point Loads[J]. Materials and Structures, 2000, 33(3): 181–188.
American Society for Testing and Materials. ASTM C-1550, Standard Test Method for Flexural Toughness of Fibre Reinforced Concrete (Using Centrally-Loaded Round Panel)[S]. West Conshohocken: ASTM, 2003.
Bernard E S. Shotcrete: More Engineering Developments[C]// Proceedings of the Second International Conference on Engineering Developments in Shotcrete. Queensland: A. A. Balkema Publishers, 2004: 59–66.
Xu H, Mindess S, Banthia N. The Impact Response of Normal and very High Strength FRC Round Panels[C]// International Workshop on High Performance Fibre Reinforced Cementitious Composites in Structural Applications. Bagneux: RILEM Publications SARL, 2006: 561–569.
Mindess S, Banthia N, Xu H. Fiber Reinforced Round Panels Subjected to Impact Loading[C]//RILEM proceedings pro048: Advances in Concrete through Science and Engineering. Evanston: RILEM Publications SARL, 2004.
Xu H, Gu Q, Mindess S. Deformation of Round Determinate Panels Containing Fibres[C]//Proceedings of the Shotcrete for Underground Support X Conference. Whistler: ASCE, 2006: 138–149.
LS-DYNA Keyword User’s Manual (Version 970) [M]. Livermore: Livermore Software Technology Corporation, 2003.
Huang Chengkui. Fibre Reinforced Concrete Structure[M]. Beijing: China Machine Press, 2004(Ch).
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: Supported by the National Natural Science Foundation of China (50708084) and Wuhan Chenguang Science and Technology Project for Young Experts (20035002016-30)
Rights and permissions
About this article
Cite this article
Gu, Q., Xu, H. & Mindess, S. An improved test method and numerical analysis for crack opening resistance of FRC round determinate panels. Wuhan Univ. J. Nat. Sci. 14, 47–52 (2009). https://doi.org/10.1007/s11859-009-0111-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11859-009-0111-2