Abstract
Anti-collision equipments system is developed to solve the collision problems of dam construction equipments, and in the system the determination of equipments’ space state is important. A uniform moving equation of equipments is established based on the analysis prediction theory and the movements states of equipments. Method of least square was employed to deal with discrete data of equipments’ space position. Fitting equation matched with the movement equation was presented to do data fitting, and a relevant algorithm was given. Applying the fitting equation, current and future space state of equipments can be accurately predicted. Finally, a case is given and results show that numerical values of data were steady and their precision was high. In Long-Tan dam construction of the equipments anti-collision system, applying this method to forecast the equipments’ space states and practical running of the system indicate that this method can improve the precision of position, obtain the better forecasting effect and increase the robustness of the system.
Similar content being viewed by others
References
Wang Min. Analysis Theory Processing Tensor’s Data about the Space Position of Targets [J]. Ship Electronic Engineering, 2004, 24(4): 1–7(Ch).
Wang Shuji, Wang Min. Using Neural Networks in Multi-Target Track [J]. Ship Electronic Engineering, 1995, 15(3): 12–16(Ch).
Wang Min, Wang Shuji, Wu Xiangjun. A New Theory to Forecast Position of a Moving Object at a Constant Velocity or Acceleration [J]. Ship Engineering, 1995, 17(3): 40–48(Ch).
Wang Min. Analysis and Statistic Theory of Forecasting the Future Position of Targets [J]. Ship Electronic Engineering, 2004, 24(6): 10–17(Ch).
Wang Min, Lin Linghui. Tactics Dealing with the Development of Processing Technology of Tensor’s Data about Target’s Space Position [J]. Ship Electronic Engineering, 2004, 24(3): 7–9(Ch).
Wang Min, He Julin. Analysis Recognizing Theory of Movement Mode [J]. Ship Electronic Engineering, 2005,25(1): 4–12(Ch).
Wang Baolu. Tower Crane Anti-Collision and Region Protection System[J]. Construction Machinery, 2001, 218(7): 44–45(Ch).
Yang Qingquan, Liu Chunlin. Tower Crane Anti-Collision & Working Area Limitation Technology [J]. Construction Machinery, 2004, 253(7): 78–80(Ch).
Shi Wangming, Yang Huafei, Wu Yushu, et al. Numerical Analysis [M]. Beijing: Beijing Institute of Technology Press, 2002(Ch).
Yan Qingjin. Numerical Analysis [M]. Beijing: Beijing University of Aeronautics & Astronautics Press, 2000(Ch).
Author information
Authors and Affiliations
Additional information
Foundation item: Supported by the National Key Technological Equipment Plan of China (ZZ02030301) and Longtan Hydropower Development Corporation Limited of China Datang Corporation
Biography: WU Qingming (1947–), male, Professor, research direction: virtual prototyping, modern design method.
Rights and permissions
About this article
Cite this article
Wu, Q., Chen, Y. & Zhang, Z. A space state forecast model for dam construction equipments based on analysis prediction theory. Wuhan Univ. J. of Nat. Sci. 12, 307–310 (2007). https://doi.org/10.1007/s11859-006-0020-6
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11859-006-0020-6