Abstract
Plasma-arc centrifugal treatment vitrification technology has advanced from the first experiments in 1985 to occupy a niche in the waste-treatment market. The centrifugal action, the force of the plasma gas, and the water-cooled walls work together to generate a durable, homogenous, vitrified waste form coupled with the safe confinement of th e hazardous feeds and high organic removal efficiency. This technology has recently been applied to treat wastes completely while achieving maximum volume reduction.
Similar content being viewed by others
References
R.C. Eschenbach and K.D. Boomer, “Plasma Arc Stabilization of Hazardous Mixed Wastes” (Paper presented at the ANS Winter Meeting, Los Angeles, CA, 15–19 November 1987).
M.P. Schlienger, U.S. patent 4,770,109 (September 13, 1988); U.S. patent 5,005,494 (April 9, 1991); U.S. patent 5,136,137 (August 4, 1992).
Retech Inc. Plasma Centrifugal Furnace Application Analysis Report (Cincinnati, OH: U.S. EPA, Risk Reduction Engineering Laboratory, June, 1992), p. 9.
“U.S. Code of Federal Regulations,” 40 CFR (07/01/90 Edition) Paragraph 264.343(c).
Plasma Arc Technology Evaluation, Scientific and Technical Report (Johnstown, PA: NDCEE, 1997), Table 6A.
R.C. Eschenbach, “Plasma Arc Centrifugal Treatment (PACT) of Hazardous Waste” (Paper presented at the 8th Symposium on Plasma Science for Materials, Tokyo, Japan, 15–16 June 1995).
R.C. Eschenbach, X. Feng, and R.E. Einziger, “A Direct, Single Step Plasma Arc-Vitreous Ceramic Process for Stabilizing Spent Nuclear Fuels, Sludges, and Associated Wastes” (Paper presented at the Scientific Basis for Nuclear Waste Management XX, Boston, MA, 2–6 December 1996).
Y. Tsuji et al., Proceedings of the 1994 Incineration Conference (Irvine, CA: Univ. of CA, 1994), pp. 151–153.
Y. Nakayama et al., Proceedings of the 1995 Incineration Conference (Irvine, CA: Univ. of CA, 1995), pp. 427–429.
R.C. Eschenbach and C.G. Whitworth, “Glassy Slag from Rotary Hearth Vitrification” (Paper presented at the American Ceramic Society Meeting, Cincinnati, Ohio, 30 April–4 May 1995).
Author information
Authors and Affiliations
Additional information
Editor’s Note: A hypertext-enhanced version of this article is available at www/tms.org/pubs/journals/JOM/9910/Womack-9910.html.
For more information, contact R.K. Womack, Retech Services, P.O. Box 997, Ukiah, California 97482; (707) 467-1721; fax (707) 467-1638; e-mail ronald.k.womack@lmco.com.
Rights and permissions
About this article
Cite this article
Womack, R.K. Using the centrifugal method for the plasma-arc vitrification of waste. JOM 51, 14–16 (1999). https://doi.org/10.1007/s11837-999-0180-x
Issue Date:
DOI: https://doi.org/10.1007/s11837-999-0180-x