Abstract
This article provides an overview of some of the critical materials issues involved in the utilization and commercialization of aluminum-nitride ceramics in electronic applications. Critical material defects and microstructural issues that control thermal, electrical, and mechanical properties and the status of metallization technology are reviewed. Finally, a discussion of current and future potential applications of sintered AlN and how these applications tie into key material properties is provided.
Similar content being viewed by others
References
E. Ponthieu et al., J. of the Eur. Cer. Soc., 8 (1991), p. 233.
W. Rafaniello, M. Paquette, and T. Rey, Cer. Pow. Sci. III, eds. G.L. Messing, S. Hirano, and H. Hausner (Westervelt, OH: ACS, 1990), p. 865.
M.S. Paquette et al., Cer. Pow. Sci. III, eds. G.L. Messing, S. Hirano, and H. Hausner (Westervelt, OH: ACS, 1990), p. 855.
K. Komeya and J. Inoue, Trans. J. Brit. Ceram. Soc., 70 (1971), p. 107.
K. Komeya, H. Inoue, and A. Tsuge, Yogyo-Kyokai-Shi, 39 (1981), p. 330.
S. Prochazka and C.F. Bobik, Mat. Sci. Rev., 13 (1980), p. 321.
M. Billy et al., Physical Chemistry of the Solid State: Applications to Metals and Their Compounds, ed. P. Lacombe (Netherlands: Elsevier Science Publishers, 1984), p. 381.
I.C. Huseby and C.F. Bobik, U.S. patent no. 4,547,471 (1985).
N.S. Van Damme, S. Richard, and S. Winzer, J. Am. Ceram. Soc., 72 (1989), p. 1409.
A. Virkir, T.B. Jackson, and R. Cutler, J. Am. Ceram. Soc., 71 (1989), p. 588.
D.K. Kim, Proceedings of the International Symposium on AIN Ceramics, in press.
K. Watari et al., in Ref. 11.
H. Sumino et al., in Ref. 11.
G.A. Slack and T.F. McNelly, J. Cryst. Growth, 34 (1976), p. 263.
G.A. Slack et al., J. Phys. Chem. Solids, 48 (1987), p. 641.
G.A. Slack, J. Phys. Chem Solids, 34 (1973), p. 321.
B. Abeles, Phys. Rev., 131 (1963), p. 1906.
J.H. Harris, R.A. Youngman, and R.G. Teller, J. Mater. Res., 5 (1990), p. 1763.
J.H. Harris, R.C. Enck, and R.A. Youngman, Phys. Rev. B, 47 (1993), p. 5428.
A.V. Virkar, in Ref. 11.
M. Tajika, H. Matsubara, and W. Rafaniello, in Ref. 11.
F. Raether and G. Muller, in Ref. 11.
J.H. Harris and R.C. Enck, J. Mater. Res., 8 (1993), p. 2734.
R.C. Enck et al., patent application (March 1996).
A. Nakayama et al., J. Am. Ceram. Soc., 79 (1996), p. 1453.
J.H. Harris et al., in Ref. 11.
M. Kasori et al., in Ref. 11.
K. Hiruta et al., in Ref. 11.
W. Chen and G. Ravichandran, in Ref. 11.
M. Healy and R. Spivey, Electronic Packaging and Production June (1994).
S. Shinde et al., U.S. patent (approved but not yet issued).
R. Koba et al., Microwaves and RF, 156 (October 1997).
Author information
Authors and Affiliations
Additional information
Jonathan H. Harris earned his Ph.D. in solid state physics at Brown University in 1983. He is currently vice president of technology at Crystalline Materials Corporation.
Rights and permissions
About this article
Cite this article
Harris, J.H. Sintered aluminum nitride ceramics for high-power electronic applications. JOM 50, 56–60 (1998). https://doi.org/10.1007/s11837-998-0130-z
Issue Date:
DOI: https://doi.org/10.1007/s11837-998-0130-z