Skip to main content
SpringerLink
Log in

Two-Stage Modeling of Tensile Strength for a Carbon-Nanotube-Based System Applicable in the Biomedical Field

  • Two-Dimensional (2D) Materials, Devices, and Sensors
  • Published:
JOM Aims and scope Submit manuscript

Abstract

This work presents a two-stage simulation for tensile strength of polymer systems reinforced with carbon nanotubes (CNT), investigating mechanical percolation onset and networking of the interphase zone. In the first stage, the tensile strength of expanded nets comprising CNT and connecting interphase was calculated using Kelly–Tyson theory. In the second step, the strength of systems containing expanded nets and polymer mediums was predicted by an expanded Takayanagi model. Numerous tentative data and analysis of factors were used to confirm the established methodology. The tentative data appropriately approved the model’s outputs, and the roles of all factors in the strength of samples were acceptable. A dense and robust interphase is necessary to create a strong system, while a thin interphase reduces the strength of samples. Slim (radius of 4 nm) and long (length of 20 μm) CNTs improve the nanocomposite strength by 650%, but thick CNTs (radius more than 14 nm) cannot strengthen the polymer mediums.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6

Similar content being viewed by others

References

  1. K. Behdinan, R. Moradi-Dastjerdi, B. Safaei, Z. Qin, F. Chu, and D. Hui, Nanotechnol. Rev. 9, 41. (2020).

    Google Scholar 

  2. M. Toozandehjani, K.A. Matori, F. Ostovan, K.R. Jamaludin, A. Amrin, and E. Shafiei, JOM 1, 2339. (2020).

    Google Scholar 

  3. M. Soltanloo, M. Kazazi, S.E.H. Yeganeh, M.D. Chermahini, and B. Mazinani, JOM 1, 2235. (2020).

    Google Scholar 

  4. J. Zou, X. Sun, R. Li, and Q. He, JOM J. Miner. Met. Mater. Soc. TMS 72, 3003. (2020).

    Google Scholar 

  5. A.A.P. Khan, G.C. Bazan, B.G. Alhogbi, H.M. Marwani, A. Khan, M. Alam, M.M. Rahman, and A.M. Asiri, J. Mater. Res. Technol. 9, 9667. (2020).

    Google Scholar 

  6. R. Palanisamy, D. Karuppiah, S. Rengapillai, G. Ramasamy, M. Abdollahifar, F.-M. Wang, and S. Marimuthu, JOM 72, 2260. (2020).

    Google Scholar 

  7. G.P. Sanborn, L.A. Singh, S.P. Turano, S. Selvamurugan, M.L. Walker, and W.J. Ready, JOM 72, 544. (2020).

    Google Scholar 

  8. F. Kazemi, Z. Mohammadpour, S.M. Naghib, Y. Zare, and K.Y. Rhee, J. Mater. Res. Technol. 15, 1777. (2021).

    Google Scholar 

  9. Q. Jiang, S.S. Tallury, Y. Qiu, and M.A. Pasquinelli, Nanotechnol. Rev. 9, 136. (2020).

    Google Scholar 

  10. R. Cui, K. Jiang, M. Yuan, J. Cao, L. Li, Z. Tang, and Y. Qin, J. Mater. Res. Technol. 9, 10130. (2020).

    Google Scholar 

  11. S.J. Heo, K.H. Kim, B. Han, H.G. Chae, and S.G. Lee, Sci. Rep. 10, 1. (2020).

    Google Scholar 

  12. H. Jung, H.K. Choi, Y. Oh, H. Hong, and J. Yu, Sci. Rep. 10, 1. (2020).

    Google Scholar 

  13. A. Rostami and M.I. Moosavi, J. Appl. Polym. Sci. 137, 48520. (2020).

    Google Scholar 

  14. A. Farzaneh, A. Rostami, and H. Nazockdast, Polym. Compos. 42, 4804. (2021).

    Google Scholar 

  15. H. Yang, P. Peng, Q. Sun, Q. Zhang, N. Ren, F. Han, and D. She, J. Mater. Res. Technol. 9, 8884. (2020).

    Google Scholar 

  16. Y.-F. Zhang, F.-P. Du, L. Chen, K.-W. Yeung, Y. Dong, W.-C. Law, G.C.-P. Tsui, and C.-Y. Tang, Nanotechnol. Rev. 9, 478. (2020).

    Google Scholar 

  17. P. Homa, K. Wenelska, and E. Mijowska, Sci. Rep. 10, 1. (2020).

    Google Scholar 

  18. J. Li, P.C. Ma, W.S. Chow, C.K. To, B.Z. Tang, and J.K. Kim, Adv. Funct. Mater. 17, 3207. (2007).

    Google Scholar 

  19. C. McClory, T. McNally, M. Baxendale, P. Pötschke, W. Blau, and M. Ruether, Eur. Polym. J. 46, 854. (2010).

    Google Scholar 

  20. M. Martin-Gallego, M. Bernal, M. Hernandez, R. Verdejo, and M. Lopez-Manchado, Eur. Polym. J. 49, 1347. (2013).

    Google Scholar 

  21. M. Liu, I.A. Kinloch, R.J. Young, and D.G. Papageorgiou, Compos. Part B Eng. 178, 107506. (2019).

    Google Scholar 

  22. Y. Zare and K.Y. Rhee, J. Mater. Res. Technol. 15, 5343. (2021).

    Google Scholar 

  23. Y. Zare and K.Y. Rhee, J. Mater. Res. Technol. 9, 12473. (2020).

    Google Scholar 

  24. B.S. Fralick, E.P. Gatzke, and S.C. Baxter, Probab. Eng. Mech. 30, 1. (2012).

    Google Scholar 

  25. M.K. Hassanzadeh-Aghdam, M.J. Mahmoodi, and R. Ansari, Compos. Part B Eng. 168, 274. (2019).

    Google Scholar 

  26. M. Hassanzadeh-Aghdam, M. Mahmoodi, R. Ansari, and A. Darvizeh, J. Intel. Mater. Syst. Struct. https://doi.org/10.1177/1045389X18812704 (2018).

    Article  Google Scholar 

  27. Y. Zare, J. Colloid Interface Sci. 470, 245. (2016).

    Google Scholar 

  28. Y. Zare and K.Y. Rhee, Polym. Compos. 41, 748. (2020).

    Google Scholar 

  29. R. Qiao and L.C. Brinson, Compos. Sci. Technol. 69, 491. (2009).

    Google Scholar 

  30. H. Shin, S. Yang, J. Choi, S. Chang, and M. Cho, Chem. Phys. Lett. 635, 80. (2015).

    Google Scholar 

  31. H.-X. Li, Y. Zare, and K.Y. Rhee, Mater. Chem. Phys. 207, 76–83. (2018).

    Google Scholar 

  32. Y. Zare and K.Y. Rhee, JOM 71, 3980. (2019).

    Google Scholar 

  33. A. Kelly and G. Davies, Metall. Rev. 10, 1. (1965).

    Google Scholar 

  34. Y. Zare, Mech. Mater. 85, 1. (2015).

    Google Scholar 

  35. Y. Zare, K.Y. Rhee, and S.-J. Park, Results Phys. 14, 102406. (2019).

    Google Scholar 

  36. C. Feng and L. Jiang, Compos. Part A Appl. Sci. Manuf. 47, 143. (2013).

    Google Scholar 

  37. M. Loos and I. Manas-Zloczower, Polym. Eng. Sci. 53, 882. (2013).

    Google Scholar 

  38. Y.-L. Liu, W.-H. Chen, and Y.-H. Chang, Carbohydr. Polym. 76, 232. (2009).

    Google Scholar 

  39. S. Yu, W.M. Wong, X. Hu, and Y.K. Juay, J. Appl. Polym. Sci. 113, 3477. (2009).

    Google Scholar 

  40. X. Cao, H. Dong, C.M. Li, and L.A. Lucia, J. Appl. Polym. Sci. 113, 466. (2009).

    Google Scholar 

  41. S.M. Yuen and C.C.M. Ma, J. Appl. Polym. Sci. 109, 2000. (2008).

    Google Scholar 

  42. Y. Zare and K.Y. Rhee, JOM 71, 3989. (2019).

    Google Scholar 

  43. M.A. Maghsoudlou, R.B. Isfahani, S. Saber-Samandari, and M. Sadighi, Compos. Part B Eng. 175, 107119. (2019).

    Google Scholar 

  44. I. Otaegi, N. Aranburu, M. Iturrondobeitia, J. Ibarretxe, and G. Guerrica-Echevarría, Polymers 11, 2059. (2019).

    Google Scholar 

  45. Y. Dai, Y.-W. Mai, and X. Ji, Compos. Part B Eng. 39, 1062. (2008).

    Google Scholar 

  46. Y. Rostamiyan, A. Fereidoon, A.H. Mashhadzadeh, M.R. Ashtiyani, and A. Salmankhani, Compos. Part B Eng. 69, 304. (2015).

    Google Scholar 

  47. R. Rafiee and A. Eskandariyun, Compos. Part B Eng. 173, 106842. (2019).

    Google Scholar 

  48. C. Gao, S. Zhang, F. Wang, B. Wen, C. Han, Y. Ding, and M. Yang, ACS Appl. Mater. Interfaces 6, 12252. (2014).

    Google Scholar 

  49. A. Lazzeri and V.T. Phuong, Compos. Sci. Technol. 93, 106. (2014).

    Google Scholar 

  50. Y. Chen, F. Pan, Z. Guo, B. Liu, and J. Zhang, J. Mech. Phys. Solids 84, 395. (2015).

    Google Scholar 

  51. W.D. Callister and D.G. Rethwisch, Materials Science and Engineering: An Introduction (Wiley, New York, 2007).

    Google Scholar 

Download references

Funding

No funding

Author information

Authors and Affiliations

  1. Biomaterials and Tissue Engineering Research Group, Department of Interdisciplinary Technologies, Breast Cancer Research Center, Motamed Cancer Institute, ACECR, Tehran, Iran

    Yasser Zare

  2. Department of Mechanical Engineering (BK21 Four), College of Engineering, Kyung Hee University, Yongin, Republic of Korea

    Kyong Yop Rhee

  3. Department of Chemistry, Inha University, Incheon, 22212, Republic of Korea

    Soo-Jin Park

Authors
  1. Yasser Zare
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Kyong Yop Rhee
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Soo-Jin Park
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding authors

Correspondence to Kyong Yop Rhee or Soo-Jin Park.

Ethics declarations

Conflict of interest

The authors declare that they have no conflicts of interest.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zare, Y., Rhee, K.Y. & Park, SJ. Two-Stage Modeling of Tensile Strength for a Carbon-Nanotube-Based System Applicable in the Biomedical Field. JOM 74, 3059–3068 (2022). https://doi.org/10.1007/s11837-022-05270-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11837-022-05270-8

Search

Navigation