Abstract
We describe the technique of spark plasma sintering and highlight its advantages, providing several examples of model materials that can be produced using this manufacturing methodology. We also discuss commercialization of the technology and the likely future of materials manufacturing, including production volume and savings.
Similar content being viewed by others
References
O. Guillon, J. Gonzalez-Julian, B. Dargatz, T. Kessel, G. Schierning, J. Rathel, and M. Hermann, Adv. Eng. Mater. 16, 830 (2014).
L. Wang, J. Zhang, and W. Jiang, Int. J. Refrac. Met. Hard Mater. 39, 103 (2013).
E.A. Olevsky, E.V. Aleksandrova, A.M. Ilyina, D.V. Dudina, A.N. Novoselov, K.Y. Pelve, and E.G. Grigoryev, Materials 6, 4375 (2013).
Z.A. Munir, D.T. Quach, and M. Ohyanagi, J. Amer. Ceram. Soc. 94, 1 (2011).
J.E. Garay, Ann. Rev. Mater. Res. 40, 445 (2010).
S. Grasso, Y. Sakka, and G. Maizza, Sci. Tech. Adv. Mater. 10, 053001 (2009).
O.A. Graeve, R. Kanakala, L. Kaufman, K. Sinha, E. Wang, B. Pearson, G. Rojas-George, and J.C. Farmer, Mater. Lett. 62, 2988 (2008).
K. Sinha, B. Pearson, S.R. Casolco, J.E. Garay, and O.A. Graeve, J. Amer. Ceram. Soc. 92, 2504 (2009).
B.M. Clark, J.P. Kelly, and O.A. Graeve, Mater. Res. Soc. Symp. Proc. 1485, 9 (2013).
R.O. Ritchie, Nature Mater. 10, 817 (2011).
O.A. Graeve, H. Singh, and A. Clifton, Ceram. Trans. 194, 209 (2006).
S.F. Wang, J. Zhang, D.W. Luo, F. Gu, D.Y. Tang, Z.L. Dong, G.E.B. Tan, W.X. Que, and T.S. Zhang, Prog. Solid State Chem. 41, 20 (2013).
J.P. Kelly and O.A. Graeve, Sintering: Mechanisms of Convention Nanodensification and Field Assisted Processes, ed. R.H.R. Castro and K. van Benthem (New York: Springer, 2013), p. 57.
O.A. Graeve and J.P. Kelly, High Temperature Materials and Mechanisms, ed. Y. Bar-Cohen (New York: CRC Press/Taylor and Francis Group, 2014), p. 163.
R. Aalund, Ceram. Ind. 159, 20 (2009).
C. Musa, R. Licheri, A.M. Locci, R. Orrù, G. Cao, M.A. Rodriquez, and L. Jaworska, J. Cleaner Prod. 17, 877 (2009).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kelly, J.P., Graeve, O.A. Spark Plasma Sintering as an Approach to Manufacture Bulk Materials: Feasibility and Cost Savings. JOM 67, 29–33 (2015). https://doi.org/10.1007/s11837-014-1202-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11837-014-1202-x