Abstract
In the past, it was customary to use out-of-circulation coins as pendants by brazing a peg or ring on the edge of the coin in order to transform it into a devotional or decorative object; this practice was very common for specimens of the Papal States, especially for silver coins. This metallurgical investigation of a 19th century Scudo aimed to relate the internal structure of the coin to the minting technology with a special focus on the brazing drop, in order to provide information on the solidification microstructure arising from a strongly nonequilibrium process such as brazing. The results show that the Ag content in the coin ranges from 92% in the bulk up to 97% on the surface, due to enrichment, while analysis of the brazing revealed that it consists of an Ag-Cu-Zn-Pb alloy, for which the melting temperature has been estimated. Considering the distribution of minor elements, Zn segregates in the secondary (Cu-rich) β-dendrites and inside the whole eutectic structure, while Pb is only present in the Ag-based phases and seems to reduce the solubility of Zn inside the primary (Ag-rich) α-dendrites.
Similar content being viewed by others
References
I. Calliari, M. Magrini, A. Zambon, P. Guerriero, and R. Martini, X-Ray Spectrom. 28, 86–90 (1999).
N. Civici, S. Gjongecaj, F. Stamati, T. Dilo, E. Pavlidou, and E. Polychroniadis, Nucl. Instrum. Methods Phys. Res. B. 258, 414–420 (2007).
L. Beck, S. Bosonnet, S. Reveillon, D. Eliot, and F. Pilon, Nucl. Instrum. Methods Phys. Res. B. 226, 153–162 (2004).
D.A. Scott, Metallography and Microstructure of Ancient and Historic Metals (Los Angeles: The Getty Conservation Institute, 1999), p. 5.
L.H. Cope, Methods of Chemical and Metallurgical Investigation of Ancient Coinage, ed. E.T. Hall and D.M. Metcalf (London: RNS Special Publication NO 8, 1972), p. 261.
S. La Niece and P. Craddock, Metal Plating and Platination (London: Butterworth-Heinemann, 1993), pp. 201–210.
Y.A. Chang, D. Goldberg, and J.P. Neumann, J. Phys. Chem. Ref. Data 6, 669–673 (1977).
Materials Science International Team (MSIT®), Numerical Data and Functional Relationship in Science and Technology, Group IV: Physical Chemistry, Vol. 11: Ternary Alloy Systems, Subvol. C: Non-Ferrous Metal Systems, Part 3: Selected Soldering and Brazing Systems, ed. G. Effenberg and S. Ilyenko (New York: The Landolt-Börnstein Series, Springer, 2007), p. 75.
C. Crisafulli, Inspecto Nummo, ed. A. Saccocci (Esedra: Padova, 2001), p. 165.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Breda, M., Canovaro, C., Pérez, A.F.M. et al. From Coin to Medal: A Metallurgical Study of the Brazing Drop on a 19th Century Scudo . JOM 64, 1350–1355 (2012). https://doi.org/10.1007/s11837-012-0455-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11837-012-0455-5