Abstract
The non-isothermal pyrolysis of printed wiring boards (PWBs) was investigated by simultaneous thermogravimetric and differential thermal analysis (TG-DTA) in the temperature range of 300–1200 K. Pyrolysis experiments were carried out on PWBs samples at three different heating rates of 10, 20, and 30°C/min. In this study, the kinetic parameters of PWBs pyrolysis have been estimated using model free and model fitted methods.
Similar content being viewed by others
References
William J. Hall and P.T. Williams, Resources, Conservation and Recycling, 51 (2007), pp. 691–709.
Jirang Cui and E. Forssberg, J. Hazardous Materials, B99 (2003), pp. 243–263.
Cui Quan, A. Li, and Ningbo Gao, Waste Management, 29 (2009), pp. 2353–2360.
R. Navarro, L. Torre, J.M. Kenny, A. Jiménez, Polymer Degradation and Stability, 82 (2003), pp. 279–290.
Won II Kim, S.D. Kim, Seung Bum Lee, and In Kwon Hong, J. Industrial and Engineering Chemistry, 6(5) (2000), pp. 348–355.
Chao-Rui Li and T.B. Tang, J. Material Science, 34 (1999), pp. 3467–3470.
Qingfeng Wang, W. Shi, Polymer Degradation and Stability, 91 (2006), pp. 1747–1754.
Jae-Young Lee, H.-K. Choi, Mi-Ja Shim, and Sang-Wook Kim, J. Industrial and Engineering Chemistry, 4(1) (1998), pp. 7–11.
K.S. Chen, H.C. Chen, C.H. Wu, and Youn-Min Chou, J. Environmental Engineering, 25(3) (1999), pp. 277–283.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Luyima, A., Zhang, L. & Damoah, L.N.W. Kinetic analysis of the thermal degradation of printed wiring boards. JOM 63, 33–37 (2011). https://doi.org/10.1007/s11837-011-0134-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11837-011-0134-y