Abstract
Over the past twenty years, integrated computational materials engineering (ICME) has emerged as a key engineering field with great promise. Models simulating materials-related phenomena have been developed and are being validated for industrial application. The integration of computational methods into material, process and component design has been a challenge, however, in part due to the complexities in the development of an ICME “supply-chain” that supports, sustains and delivers this emerging technology. ICME touches many disciplines, which results in a requirement for many types of computational-based technology organizations to be involved to provide tools that can be rapidly developed, validated, deployed and maintained for industrial applications. The need for, and the current state of an ICME supply-chain along with development and future requirements for the continued pace of introduction of ICME into industrial design practices will be reviewed within this article.
Similar content being viewed by others
References
Sharon C. Glotzer et. al., WTEC Panel Report on International Assessment of Research and Development in Simulation-based Engineering and Science (World Technology Evaluation Center, Inc. 4800 Roland Avenue Baltimore, Maryland 21210).
Defense Advanced Research Projects Agency-Accelerated Insertion of Materials, DARPA-AIM. http://www.darpa.mil/dso/thrusts/matdev/aim/index.html .
D.G. Backman, D.Y. Wei, D.D. Whitis, M.B. Buczek, P.M. Finnigan, and G. Gao, JOM, 58(11) (2006), pp. 36–41.
J. Allison et al., JOM, 58(11) (2006), pp. 28–35.
Integrated Computational Material Engineering-A Transformational Discipline for Improved Competitiveness and National Security (Washington, D.C.: National Academies Press, 2008).
Mary E. Kinsella and Daniel Evans, “Government and Industry Partnering: Technology Transition through Collaborative R&D; Metals Affordability Initiative: A Government-Industry Technical Program,” Defense AT&L (March–April 2007), pp. 12–15.
Center for Computational Materials Design, Penn State University and Georgia Institute of Technology; www.ccmd.psu.edu .
Center for the Accelerated Maturation of Materials, Ohio State University; www.camm.ohio-state.edu/index.html .
K. Thornton et. al., JOM, 62(10) (2009), pp. 12–17.
C. Rae, Materials Science and Technology, 25(4) (2009), pp. 479–487.
R. Reed, T. Tao, and N. Warnken, Acta Materialia, 57(19) (2009), pp. 5898–5913.
C.J. Kuehmann and G.B. Olson, Materials Science and Technology, 25(4) (2009), pp. 472–478.
D. Furrer, A. Chatterjee, G. Shen, S.L. Semiatin, J. Miller, M. Glavicic, R. Goetz, and D. Barker, Ti2007 Science and Technology, ed. M. Minomi, S. Akiyama, M. Ikeda, M. Hagiwara, and K. Maruyama (Sendai, Japan: The Japan Institute of Metals, 2007), pp. 781–788.
G. Shen, S.L. Semiatin, and R. Shivpuri, Met. Trans. A, 26A (1995), pp. 1795–1802.
N. Warnken, A. Drevermann, D. Ma, S. Fries, and I. Steinbach, Superalloys 2008, ed. Roger C. Reed et al. (Warrendale, PA: TMS, 2008), pp. 951–962.
D.U. Furrer and S.L. Semiatin, editors, Fundamentals of Modeling for Metals Processing, ASM-International Metals Handbook Volume 22A (Materials Park, OH: ASM International, 2009).
D.U. Furrer and S.L. Semiatin, editors, Metals Process Simulation, ASM-International Metals Handbook Volume 22B (Materials Park, OH: ASM International, 2010).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Furrer, D., Schirra, J. The development of the ICME supply-chain: Route to ICME implementation and sustainment. JOM 63, 42–48 (2011). https://doi.org/10.1007/s11837-011-0058-6
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11837-011-0058-6