Abstract
Structural control systems have gained popularity for the ability to reduce the structural vibration response of civil structures subjected to different types of dynamic loads. Passive, semi-active, active and hybrid control systems have been widely utilized in various types of structures. This article presents one of the most economical and yet the most effective approaches used in structural vibration control. Herein, a comprehensive state-of-the-art review of the development and application of metallic dampers is discussed. The dampers are classified into five categories: steel, aluminum, lead, copper and shaped-memory alloy dampers. In addition, the details of various computational methods used in the analysis of metallic dampers are briefly explained. This article reveals that the use of metallic dampers is being advanced broadly owing to their low manufacturing costs, stable hysteresis behavior, resistance to ambient temperature, reliability and high energy dissipation capability. It is also concluded that mild steel is the most popular material among metallic dampers.
Similar content being viewed by others
References
Ghaedi K, Ibrahim Z (2017) Earthquake prediction. In: Zouaghi T (ed) Earthquakes—tectonics, hazard risk mitigation. InTech, London, pp 205–227. https://doi.org/10.5772/65511
Spencer BF Jr, Nagarajaiah S (2003) State of the art of structural control. J Struct Eng 129:845–856
Saaed TE, Nikolakopoulos G, Jonasson J-E, Hedlund H (2013) A state-of-the-art review of structural control systems. J Vib Control 21:919–937. https://doi.org/10.1177/1077546313478294
Housner GW, Bergman LA, Caughey TK, Chassiakos AG, Claus RO, Masri SF, Skelton RE, Soong TT, Member S, Spencer BF, Yao JTP (1997) Structural control: past, present, and future. J. Eng. Mech. 123:897–971
Soong TT, Spencer BF (2002) Supplemental energy dissipation: state-of-the-art and state-of-the- practice. Eng Struct 24:243–259. https://doi.org/10.1016/S0141-0296(01)00092-X
Symans MD, Charney FA, Whittaker AS, Constantinou MC, Kircher CA, Johnson MW, McNamara RJ (2008) Energy dissipation systems for seismic applications: current practice and recent developments. J Struct Eng 134:3–21. https://doi.org/10.1061/(asce)0733-9445(2008)134:1(3)
Li H, Huo L (2010) Advances in structural control in civil engineering in China. Math Probl Eng. https://doi.org/10.1155/2010/936081
Fisco NR, Adeli H (2011) Smart structures: part I—active and semi-active control. Sci Iran 18:275–284. https://doi.org/10.1016/j.scient.2011.05.034
Fisco NR, Adeli H (2011) Smart structures: part II—hybrid control systems and control strategies. Sci Iran 18:285–295. https://doi.org/10.1016/j.scient.2011.05.035
Korkmaz S (2011) A review of active structural control: challenges for engineering informatics. Comput Struct 89:2113–2132. https://doi.org/10.1016/j.compstruc.2011.07.010
El-Khoury O, Adeli H (2013) Recent advances on vibration control of structures under dynamic loading. Arch Comput Methods Eng 20:353–360. https://doi.org/10.1007/s11831-013-9088-2
Ghaedi K, Ibrahim Z, Adeli H, Javanmardi A (2017) Invited Review: recent developments in vibration control of building and bridge structures. J VibroEng 19:3564–3580. https://doi.org/10.21595/jve.2017.18900
Gutierrez Soto M, Adeli H (2013) Tuned mass dampers. Arch Comput Methods Eng. 20:419–431. https://doi.org/10.1007/s11831-013-9091-7
Di Sarno L, Elnashai AS (2005) Innovative strategies for seismic retrofitting of steel and composite structures. Earthq Eng Struct Dyn 7:115–135. https://doi.org/10.1002/pse.195
Dargush GF, Sant RS (2005) Evolutionary aseismic design and retrofit of structures with passive energy dissipation. Earthq Eng Struct Dyn 34:1601–1626. https://doi.org/10.1002/eqe.497
DesRoches R, Delemont M (2002) Seismic retrofit of simply supported bridges using shape memory alloys. Eng Struct 24:325–332. https://doi.org/10.1016/S0141-0296(01)00098-0
Javanmardi A (2014) Non-linear test of precast subframe subjected to cyclic lateral loadings. Universiti Teknologi Malaysia
Javanmardi A, Abadi R, Marsono AK, Tap M, Ibrahim Z, Ahmad A (2015) Correlation of stiffness and natural frequency of precast frame system. Appl Mech Mater 735:141–144. https://doi.org/10.4028/www.scientific.net/AMM.735.141
Ghaedi K, Ibrahim Z, Jameel M, Javanmardi A, Khatibi H (2018) Seismic response analysis of fully base isolated adjacent buildings with segregated foundations. Adv Civ Eng. https://www.hindawi.com/journals/ace/aip/4517940/
Javanmardi, A., Ibrahim, Z., & Ghaedi, K. (2018, October). Development of a new hybrid precast beam-to-column connection. In IOP Conference Series: Materials Science and Engineering (Vol. 431, No. 11, p. 112002). IOP Publishing.
Prucz JC, Kokkinos F, Spyrakos CC (1989) Advanced joining concepts for passive vibration control. J Aerosp Eng 1:193–205
Ali HM, Abdel-Ghaffar AM (1995) Modeling of rubber and lead passive-control bearings for seismic analysis. J Struct Eng 121:1134–1144. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:7(1134)
Tirca LD, Foti D, Diaferio M (2003) Response of middle-rise steel frames with and without passive dampers to near-field ground motions. Eng Struct 25:169–179. https://doi.org/10.1016/S0141-0296(02)00132-3
Ibrahim RA (2008) Recent advances in nonlinear passive vibration isolators. J Sound Vib 314:371–452. https://doi.org/10.1016/j.jsv.2008.01.014
Parulekar YM, Reddy GR (2009) Passive response control systems for seismic response reduction: a state-of-the-art review. Int J Struct Stab Dyn 9:151–177
Martinelli P, Mulas MG (2010) An innovative passive control technique for industrial precast frames. Eng Struct 32:1123–1132. https://doi.org/10.1016/j.engstruct.2009.12.038
Javanmardi A, Ghaedi K, Ibrahim Z, Khatibi H (2016) Nonlinear seismic behavior of a based isolated cable-stayed bridge. In: Shahid Beheshti University (ed) 4th international congress on civil engineering, architecture and urban development, Civilica, Tehran. https://www.civilica.com/Paper-ICSAU04-ICSAU04_0204.html
Javanmardi A, Ibrahim Z, Ghaedi K, Jameel M, Khatibi H, Suhatril M (2017) Seismic response characteristics of a base isolated cable-stayed bridge under moderate and strong ground motions. Arch Civ Mech Eng 17:419–432. https://doi.org/10.1016/j.acme.2016.12.002
Javanmardi A, Ibrahim Z, Ghaedi K, Jameel M, Usman H, Gordan M (2018) Seismic response of a base isolated cable-stayed bridge under near-fault ground motion excitations. Sci Res J 15:1–14
Javanmardi A, Ibrahim Z, Ghaedi K, Khan NB, Ghadim HB (2018) Seismic isolation retrofitting solution for an existing steel cable-stayed bridge. PLoS ONE 13:1–22. https://doi.org/10.1371/journal.pone.0200482
Wang JN, Munfakh GA (2014) Buildings and bridges equipped with passive dampers under seismic actions: modeling and analysis. Encycl Earthq Eng. https://doi.org/10.1007/978-3-642-36197-5
Skinner RI, Kelly JM, Heine AJ (1974) Hysteretic dampers for earthquake-resistant structures. Earthq Eng Struct Dyn 3:287–296. https://doi.org/10.1002/eqe.4290030307
Kobori T, Miura Y, Fukuzawa E (1992) Development and application of hysteresis steel dampers. In: Tenth world conference on earthquake engineering, pp 2341–2346
Nakashima M, Saburi K, Tsuji B (1996) Energy input and dissipation behaviour of structures with hysteretic dampers. Earthq Eng Struct Dyn 25:483–496. https://doi.org/10.1002/(SICI)1096-9845(199605)25:5%3c483:AID-EQE564%3e3.0.CO;2-K
FEMA-416 (2007) Interim testing protocols for determining the seismic performance characteristics of structural and nonstructural components. Federal Emergency Management Agency, Washington, DC (USA)
Bannantine JA, Comer JJ, Handrock JL (1990) Fundamental of metal fatigue analysis. Prentice Hall, Englewood Cliffs
Azevedo J, Calado L (1994) Hysteretic behaviour of steel members: analytical models and experimental tests. J Constr Steel Res 29:71–94. https://doi.org/10.1016/0143-974X(94)90057-4
Miller D, Doh J-H (2014) A simple hybrid damping device with energy-dissipating and re-centering characteristics for special structures. Struct Des Tall Spec Build. 24:421–439. https://doi.org/10.1002/tal
Kelly JM, Skinner RI, Heine AJ (1972) Mechanisms of energy absorption in special devices for use in earthquake resistant structures. Bull N Z Natl Soc Earthq Eng 5:63–88
Tyler RG (1978) Tapered steel energy dissipators for earthquake resistant structures. Bull N Z Natl Soc Earthq Eng 11:282–294
Pinelli JP, Craig JI, Goodno BJ, Hsu C-C (1993) Passive control of building response using energy dissipating cladding connections. Earthq Spectra 9:529–546. https://doi.org/10.1193/1.1585728
Y Takeda, Y Kimura, K Yoshioka, N Furuya, Y Takemoto (1976) An experimental study on braces encased in steel tube and mortal. In: Annual meeting architectural Institute of Japan, pp 1041–1042
Wada A, Saeki E, Takeuchi T, Watanabe A (1989) Development of unbonded brace, Column, Nippon Steel Publication, p 115
Black C, Makris N, Aiken ID (2004) Component testing, seismic evaluation and characterization of buckling-restrained braces. Pacific Earthquake Engineering Research Center. J Struct Eng 130:880–894. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:6(880)
Black C, Makris N, Aiken ID (2002) Component testing, stability analysis and characterization of buckling-restrained unbonded braces (TM). Pacific Earthquake Engineering Research Center.
Zhao J, Wu B, Ou J (2011) A novel type of angle steel buckling-restrained brace: cyclic behavior and failure mechanism. Earthq Eng Struct Dyn 40:1083–1102. https://doi.org/10.1002/eqe
Hao X-Y, Li H-N, Li G, Makino T (2014) Experimental investigation of steel structure with innovative H-type steel unbuckling braces. Struct Des Tall Spec Build 24:421–439. https://doi.org/10.1002/tal
Dongbin Z, Xin N, Peng P, Mengzi W, Kailai D, Yabin C (2016) Experimental study and finite element analysis of a buckling-restrained brace consisting of three steel tubes with slotted holes in the middle tube. J Constr Steel Res 124:1–11. https://doi.org/10.1016/j.jcsr.2016.05.003
Bergman DM (1987) Evaluation of cyclic testing of steel-plate devices for added damping and stiffness. Department of Civil Engineering, University of Michigan
Tsai K-C, Chen H-W, Hong C-P, Su Y-F (1993) Design of steel triangular plate energy absorbers for seismic-resistant construction. Earthq Spectra 9:505–528. https://doi.org/10.1193/1.1585727
Shih M-H, Sung W-P, Go C-G (2004) Investigation of newly developed added damping and stiffness device with low yield strength steel. J Zhejiang Univ Sci 5:326–334. https://doi.org/10.1631/jzus.2004.0326
Shih M-H, Sung WP (2005) A model for hysteretic behavior of rhombic low yield strength steel added damping and stiffness. Comput Struct 83:895–908. https://doi.org/10.1016/j.compstruc.2004.11.012
Han Q, Jia J, Xu Z, Bai Y, Song N (2014) Experimental evaluation of hysteretic behavior of rhombic steel plate dampers. Adv Mech Eng 9:99. https://doi.org/10.1155/2014/185629
Li H, Li G (2007) Experimental study of structure with “dual function” metallic dampers. Eng Struct 29:1917–1928. https://doi.org/10.1016/j.engstruct.2006.10.007
Chan RWK, Albermani F (2008) Experimental study of steel slit damper for passive energy dissipation. Eng Struct 30:1058–1066. https://doi.org/10.1016/j.engstruct.2007.07.005
Ghabraie K, Chan R, Huang X, Xie YM (2010) Shape optimization of metallic yielding devices for passive mitigation of seismic energy. Eng Struct 32:2258–2267. https://doi.org/10.1016/j.engstruct.2010.03.028
Karavasilis TL, Kerawala S, Hale E (2012) Hysteretic model for steel energy dissipation devices and evaluation of a minimal-damage seismic design approach for steel buildings. J Constr Steel Res 70:358–367. https://doi.org/10.1016/j.jcsr.2011.10.010
Jie Z, Li A, Tong G (2015) Analytical and experimental study on mild steel dampers with non-uniform vertical slits. Earthq Eng Eng Vib 14:111–123. https://doi.org/10.1007/s11803-015-0010-9
Hedayat AA (2015) Prediction of the force displacement capacity boundary of an unbuckled steel slit damper. J Constr Steel Res 114:30–50. https://doi.org/10.1016/j.jcsr.2015.07.003
Oh S-H, Kim Y-J, Ryu H-S (2009) Seismic performance of steel structures with slit dampers. Eng Struct 31:1997–2008. https://doi.org/10.1016/j.engstruct.2009.03.003
Garivani S, Aghakouchak AA, Shahbeyk S (2016) Numerical and experimental study of comb-teeth metallic yielding dampers. Int J Steel Struct 16:177–196. https://doi.org/10.1007/s13296-016-3014-z
Fan S, Ding Z, Du L, Shang C, Liu M (2016) Nonlinear finite element modeling of two-stage energy dissipation device with low-yield-point steel. Int J Steel Struct 16:1107–1122. https://doi.org/10.1007/s13296-016-0029-4
Wang Y-P, Chien C-SC (2009) A study on using pre-bent steel strips as seismic energy-dissipative devices. Earthq Eng Struct Dyn 38:1009–1026. https://doi.org/10.1002/eqe
Hsu HL, Halim H (2017) Improving seismic performance of framed structures with steel curved dampers. Eng Struct 130:99–111. https://doi.org/10.1016/j.engstruct.2016.09.063
Nakashima M, Iwai S, Iwata M, Takeuchi T, Konomi S, Akazawa T, Saburi K (1994) Energy dissipation behaviour of shear panels made of low yield steel. Earthq Eng Struct Dyn 23:1299–1313. https://doi.org/10.1002/eqe.4290231203
Abebe DY, Jeong SJ, Getahune BM, Segu DZ, Choi JH (2015) Hysteretic characteristics of shear panel damper made of low yield point steel. Mater Res Innov 19:902–910. https://doi.org/10.1179/1432891714Z.0000000001219
Chen Z, Ge H, Usami T (2005) Hysteretic performance of shear panel dampers. Adv Steel Struct 2:1223–1228
Chen Z, Ge H, Usami T (2006) Hysteretic model of stiffened shear panel dampers. J Struct Eng 132:478–483. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:3(478)
Zhang C, Zhang Z, Zhang Q (2012) Static and dynamic cyclic performance of a low-yield-strength steel shear panel damper. J Constr Steel Res 79:195–203. https://doi.org/10.1016/j.jcsr.2012.07.030
Deng K, Pan P, Sun J, Liu J, Xue Y (2014) Shape optimization design of steel shear panel dampers. J Constr Steel Res 99:187–193. https://doi.org/10.1016/j.jcsr.2014.03.001
Chan RWK, Albermani F, Kitipornchai S (2008) Evaluation of yielding shear panel device for passive energy dissipation. J Constr Steel Res 91:14–25. https://doi.org/10.1016/j.jcsr.2013.08.013
Chan RWK, Albermani F, Kitipornchai S (2013) Experimental study of perforated yielding shear panel device for passive energy dissipation. J Constr Steel Res 91:14–25. https://doi.org/10.1016/j.jcsr.2013.08.013
Sahoo DR, Singhal T, Taraithia SS, Saini A (2015) Cyclic behavior of shear-and-flexural yielding metallic dampers. J Constr Steel Res 114:247–257. https://doi.org/10.1016/j.jcsr.2015.08.006
Deng K, Pan P, Li W, Xue Y (2015) Development of a buckling restrained shear panel damper. J Constr Steel Res 106:311–321. https://doi.org/10.1016/j.jcsr.2015.01.004
Kato S, Kim YB, Nakazawa S, Ohya T (2005) Simulation of the cyclic behavior of J-shaped steel hysteresis devices and study on the efficiency for reducing earthquake responses of space structures. J Constr Steel Res 61:1457–1473. https://doi.org/10.1016/j.jcsr.2005.03.006
Deng K, Pan P, Wang C (2013) Development of crawler steel damper for bridges. J Constr Steel Res 85:140–150. https://doi.org/10.1016/j.jcsr.2013.03.009
Özkaynak H (2017) Model proposal for steel cushions for use in reinforced concrete frames. KSCE J Civ Eng 21:2717–2727. https://doi.org/10.1007/s12205-017-0477-1
Benavent-Climent A (2010) A brace-type seismic damper based on yielding the walls of hollow structural sections. Eng Struct 32:1113–1122. https://doi.org/10.1016/j.engstruct.2009.12.037
Benavent-Climent A, Morillas L, Vico JM (2015) A study on using wide-flange section web under out-of-plane flexure for passive energy dissipation. Earthq Eng Struct Dyn 44:657–675. https://doi.org/10.1002/eqe
Maleki S, Bagheri S (2010) Pipe damper, part I: experimental and analytical study. J Constr Steel Res 66:1088–1095. https://doi.org/10.1016/j.jcsr.2010.03.010
Maleki S, Mahjoubi S (2013) Dual-pipe damper. J Constr Steel Res 85:81–91. https://doi.org/10.1016/j.jcsr.2013.03.004
Maleki S, Mahjoubi S (2014) Infilled-pipe damper. J Constr Steel Res 98:45–58. https://doi.org/10.1016/j.jcsr.2014.02.015
Franco JM, Cahís X, Gracia L, López F (2010) Experimental testing of a new anti-seismic dissipator energy device based on the plasticity of metals. Eng Struct 32:2672–2682. https://doi.org/10.1016/j.engstruct.2010.04.037
Javanmardi A, Ghaedi K, Ibrahim Z, Muthu KU (2018) Seismic pounding mitigation of an existing cable-stayed bridge using metallic dampers. In: IABSE conference—engineering the developing world, International Association for Bridge and Structural Engineering, Kuala Lumpur, Malaysia, pp 617–623
Wang H, Zhou R, Zong ZH, Wang C, Li AQ (2012) Study on seismic response control of a single-tower self-anchored suspension bridge with elastic-plastic steel damper. Sci China Technol Sci 55:1496–1502. https://doi.org/10.1007/s11431-012-4826-5
Yamazaki S, Usami T, Nonaka T (2016) Developing a new hysteretic type seismic damper (BRRP) for steel bridges. Eng Struct 124:286–301. https://doi.org/10.1016/j.engstruct.2016.06.033
Ghaedi K, Ibrahim Z, Javanmardi A, Rupakhety R (2018) Experimental study of a new bar damper device for vibration control of structures subjected to earthquake loads. J Earthq Eng 00:1–19. https://doi.org/10.1080/13632469.2018.1515796
Ghaedi K, Ibrahim Z, Javanmardi A (2018, October). A new metallic bar damper device for seismic energy dissipation of civil structures. In: IOP Conference Series: Materials Science and Engineering. IOP Publishing, vol 431, No 12, p 122009
Motamedi M, Nateghi-A F (2018) Study on mechanical characteristics of accordion metallic damper. J Constr Steel Res 142:68–77. https://doi.org/10.1016/j.jcsr.2017.12.010
Aghlara R, Tahir MM (2018) A passive metallic damper with replaceable steel bar components for earthquake protection of structures. Eng Struct 159:185–197. https://doi.org/10.1016/j.engstruct.2017.12.049
Aghlara R, Tahir MM, Bin Adnan A (2018) Experimental study of Pipe-Fuse Damper for passive energy dissipation in structures. J Constr Steel Res 148:351–360. https://doi.org/10.1016/j.jcsr.2018.06.004
De Matteis G, Mazzolani FM, Panico S (2007) Pure aluminium shear panels as dissipative devices in moment-resisting steel frames. Int Assoc Earthq Eng 36:841–859. https://doi.org/10.1002/eqe
De Matteis G, Brando G, Mazzolani FM (2011) Hysteretic behaviour of bracing-type pure aluminium shear panels by experimental tests. Earthq Eng Struct Dyn 40:1143–1162. https://doi.org/10.1002/eqe
Rai DC, Annam PK, Pradhan T (2013) Seismic testing of steel braced frames with aluminum shear yielding dampers. Eng Struct 46:737–747. https://doi.org/10.1016/j.engstruct.2012.08.027
Robinson WH, Greenbank LR (1976) An extrusion energy absorber suitable for the protection of structures during an earthquake. Earthq Eng Struct Dyn 4:251–259. https://doi.org/10.1002/eqe.4290040306
Soydan C, Yuksel E, Irtem E (2014) The behavior of a steel connection equipped with the lead extrusion damper. Adv Struct Eng 17:25–39. https://doi.org/10.1260/1369-4332.17.1.25
Curadelli RO, Riera JD (2007) Design and testing of a lead damper for seismic applications. Proc Inst Mech Eng Part C J Mech Eng Sci 221(2007):159–164. https://doi.org/10.1243/0954406jmes254
Cheng S, Du S, Yan X, Guo Q, Xin Y (2017) Experimental study and numerical simulation of clapboard lead damper. Proc Inst Mech Eng Part C J Mech Eng Sci 231:1688–1698. https://doi.org/10.1177/0954406215621339
de la Llera JC, Esguerra C, Almazán JL (2004) Earthquake behavior of structures with copper energy dissipators. Earthq Eng Struct Dyn 33:329–358. https://doi.org/10.1002/eqe.354
Briones B, de la Llera JC (2014) Analysis, design and testing of an hourglass-shaped ETP-copper energy dissipation device. Eng Struct 79:309–321
Casciati F, Faravelli L, Petrini L (1998) Energy dissipation in shape memory alloy devices. Comput Civ Infrastruct Eng 13:433–442. https://doi.org/10.1111/0885-9507.00121
Sepúlveda J, Boroschek R, Herrera R, Moroni O, Sarrazin M (2008) Steel beam-column connection using copper-based shape memory alloy dampers. J Constr Steel Res 64:429–435. https://doi.org/10.1016/j.jcsr.2007.09.002
Zhang Y, Zhu S (2007) A shape memory alloy-based reusable hysteretic damper for seismic hazard mitigation. Smart Mater Struct 16:1603–1613. https://doi.org/10.1088/0964-1726/16/5/014
Dolce M, Cardone D, Marnetto R (2000) Implementation and testing of passive control devices based on shape memory alloys. Earthq Eng Struct Dyn 29:945–968. https://doi.org/10.1002/1096-9845(200007)29:7%3c945:AID-EQE958%3e3.0.CO;2-%23
Dolce M, Cardone D, Ponzo FC, Valente C (2005) Shaking table tests on reinforced concrete frames without and with passive control systems. Earthq Eng Struct Dyn 34:1687–1717. https://doi.org/10.1002/eqe.501
Ma H, Cho C (2008) Feasibility study on a superelastic SMA damper with re-centring capability. Mater Sci Eng, A 473:290–296. https://doi.org/10.1016/j.msea.2007.04.073
Ma H, Yam MCH (2011) Modelling of a self-centring damper and its application in structural control. J Constr Steel Res 67:656–666. https://doi.org/10.1016/j.jcsr.2010.11.014
Mata P, Barbat AH, Oller S, Boroschek R (2008) Constitutive and geometric nonlinear models for the seismic analysis of RC structures with energy dissipators. Arch Comput Methods Eng 15:489–539. https://doi.org/10.1007/s11831-008-9024-z
Ge H, Chen X, Matsui N (2011) Seismic demand on shear panel dampers installed in steel-framed bridge pier structures. J Earthq Eng 15:339–361. https://doi.org/10.1080/13632469.2010.491892
Kim DK, Dargush GF, Hu JW (2013) Cyclic damage model for E-shaped dampers in the seismic isolation system. J Mech Sci Technol 27:2275–2281. https://doi.org/10.1007/s12206-013-0610-0
A Javanmardi, Z Ibrahim, K Ghaedi, H Khatibi (2017) Numerical analysis of vertical pipe damper. In: 39th IABSE symposium engineering the future. International Association for Bridge and Structural Engineering, Vancouver, Canada, pp 2974–2980
Vasdravellis G, Karavasilis TL, Uy B, Asce M (2012) Design rules, experimental evaluation, and fracture models for high-strength and stainless-steel hourglass shape energy dissipation devices. J Struct Eng 140:04014087. https://doi.org/10.1061/(asce)st.1943-541x.0001014
Saffari H, Hedayat AA, Nejad MP (2013) Post-Northridge connections with slit dampers to enhance strength and ductility. J Constr Steel Res 80:138–152. https://doi.org/10.1016/j.jcsr.2012.09.023
Maleki S, Bagheri S (2010) Pipe damper, part II: application to bridges. J Constr Steel Res 66:1096–1106. https://doi.org/10.1016/j.jcsr.2010.03.011
Shen X, Camara A, Ye A (2015) Effects of seismic devices on transverse responses of piers in the Sutong Bridge. Earthq Eng Eng Vib 14:611–623. https://doi.org/10.1007/s11803-015-0049-7
Vasseghi A (2011) Energy dissipating shear key for precast concrete girder bridges. Sci Iran 18:296–303. https://doi.org/10.1016/j.scient.2011.05.036
Bayat M, Abdollahzadeh G (2011) Analysis of the steel braced frames equipped with ADAS devices under the far field records. Lat Am J Solids Struct 8:163–181. https://doi.org/10.1590/S1679-78252011000200004
Mahjoubi S, Maleki S (2014) Seismic performance assessment of steel frames equipped with a novel passive damper using a new damper performance index. Struct Control Heal Monit. https://doi.org/10.1002/stc
Kim J, Jeong J (2016) Seismic retrofit of asymmetric structures using steel plate slit dampers. J Constr Steel Res 120:232–244. https://doi.org/10.1016/j.jcsr.2016.02.001
Mahmoudi M, Abdi MG (2012) Evaluating response modification factors of TADAS frames. J Constr Steel Res 71:162–170. https://doi.org/10.1016/j.jcsr.2011.10.015
Chen Z, Dai Z, Huang Y, Bian G (2013) Numerical simulation of large deformation in shear panel dampers using smoothed particle hydrodynamics. Eng Struct 48:245–254. https://doi.org/10.1016/j.engstruct.2012.09.008
Benavent-Climent A, Mota-Páez S (2017) Earthquake retrofitting of R/C frames with soft first story using hysteretic dampers: energy-based design method and evaluation. Eng Struct 137:19–32. https://doi.org/10.1016/j.engstruct.2017.01.053
Mohammadi RK, Nasri A, Ghaffary A (2017) TADAS dampers in very large deformations. Int J Steel Struct 17:515–524. https://doi.org/10.1007/s13296-017-6011-y
Deng K, Pan P, Su Y, Xue Y (2015) Shape optimization of U-shaped damper for improving its bi-directional performance under cyclic loading. Eng Struct 93:27–35. https://doi.org/10.1016/j.engstruct.2015.03.006
Usami T, Lu Z, Ge H (2005) A seismic upgrading method for steel arch bridges using buckling-restrained braces. Earthq Eng Struct Dyn 34:471–496. https://doi.org/10.1002/eqe.442
Shen X, Wang X, Ye Q, Ye A (2017) Seismic performance of Transverse Steel Damper seismic system for long span bridges. Eng Struct 141:14–28. https://doi.org/10.1016/j.engstruct.2017.03.014
Li G, Jiang Y, Zhang S, Zeng Y, Li Q (2015) Seismic design or retrofit of buildings with metallic structural fuses by the damage-reduction spectrum. Earthq Eng Eng Vib 14:85–96. https://doi.org/10.1007/s11803-015-0008-3
Vargas R, Bruneau M (2007) Effect of supplemental viscous damping on the seismic response of structural systems with metallic dampers. J Struct Eng 133:1434–1444. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:10(1434)
Vargas R, Bruneau M (2009) Experimental response of buildings designed with metallic structural fuses. II. J Struct Eng 135:394–403. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:4(394)
Mazzolani FM (2008) Innovative metal systems for seismic upgrading of RC structures. J Constr Steel Res 64:882–895. https://doi.org/10.1016/j.jcsr.2007.12.017
Mazzolani FM, Della Corte G, D’Aniello M (2009) Experimental analysis of steel dissipative bracing systems for seismic upgrading. J Civ Eng Manag 15:7–19. https://doi.org/10.3846/1392-3730.2009.15.7-19
I Nuzzo, D Losanno, G Serino, LMB Rotondo (2014) A seismic-resistant precast R. C. system equipped with shear link dissipators for residential buildings. In: Second international conference in advance civil, structural and environmental engineering, vol 2, pp 249–254. https://doi.org/10.15224/978-1-63248-030-9-52
Tagawa H, Yamanishi T, Takaki A, Chan RWK (2016) Cyclic behavior of seesaw energy dissipation system with steel slit dampers. J Constr Steel Res 117:24–34. https://doi.org/10.1016/j.jcsr.2015.09.014
Acknowledgements
The authors gratefully acknowledge the supported given by University Malaya Research Grant (UMRG—Project No. RP004A/13AET).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
On behalf of all authors, the corresponding author states that there is no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Javanmardi, A., Ibrahim, Z., Ghaedi, K. et al. State-of-the-Art Review of Metallic Dampers: Testing, Development and Implementation. Arch Computat Methods Eng 27, 455–478 (2020). https://doi.org/10.1007/s11831-019-09329-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11831-019-09329-9