Abstract
The phase behavior curves of binary and ternary system were measured for poly(alkyl methacrylate) in supercritical CO2, as well as for the poly(alkyl methacrylate)+dimethyl ether (DME) (or 1-butene) in CO2. The solubility curves are reported for the poly(alkyl methacrylate)+DME in supercritical CO2 at temperature from (300 to 465) K and a pressure from (3.66 to 248) MPa. Also, The high-pressure static-type apparatus of cloud-point curve was tested by comparing the measured phase behavior data of the poly(methyl methacrylate) [PMMA]+CO2+20.0 and 30.4 wt% methyl methacrylate (MMA) system with literature data of 10.4, 28.8 and 48.4 wt% MMA concentration. The phase behavior data for the poly(alkyl methacrylate)+CO2+DME mixture were measured in changes of the pressure-temperature (p, T) slope and with DME concentrations. Also, the cloud-point pressure for the poly(alkyl methacrylate)+1- butene solution containing supercritical CO2 shows from upper critical solution temperature (UCST) region to lower critical solution temperature (LCST) region at concentration range from (0.0 to 95) wt% 1-butene at below 455 K and at below 245MPa.
Similar content being viewed by others
References
E. J. Beckman, J. Supercrit. Fluids, 28, 121 (2004).
J. L. Kendall, D.A. Canrlas, J. L. Young and J.M. DeSimone, Chem. Rev., 99, 543 (1999).
J.-J. Luo, K. Wu, T. Cook and J. Li, Polym. Mater. Sci. Eng., 91, 711 (2004).
S.D. Yoon, C.R. Kim and H. S. Byun, Fluid Phase Equilib., 365, 97 (2014).
S. Kazarian, Drugs Pharm. Sci., 138, 343 (2004).
J.C. Lee, C.R. Kim and H. S. Byun, Korean J. Chem. Eng., 31, 2266 (2014).
Y.-T. Shieh and K.-H. Liu, J. Polym. Sci. Part B: Polym. Phys., 42, 2479 (2004).
F. Rindfleisch, T.P. DiNoia and M.A. McHugh, J. Phys. Chem., 100, 15581 (1996).
S. Liu, H.Y. Lee, S.D. Yoon, K. P. Yoo and H. S. Byun, Ind. Eng. Chem. Res., 48, 7821 (2009).
C. F. Kirby and M. A. McHugh, Chem. Rev., 99, 565 (1999).
R. Dohrn, Fluid Phase Equilib., 106, 213 (1995).
M. Christov and R. Dohrn, Fluid Phase Equilib., 202, 153 (2002).
R. Dohrn, Fluid Phase Equilib., 288, 1 (2010).
J.M. S. Fonseca, R. Dohrn and S. Peper, Fluid Phase Equilib., 300, 1 (2011).
C.W. Haschets and A.D. Shine, Macromolecules, 26, 5052 (1993).
H. S. Byun and M. A. McHugh, Ind. Eng. Chem. Res., 39, 4658 (2000).
E. Maderek, G. V. Schulz and B. A. Wolf, Eur. Polym. J., 19, 963 (1983).
M. Lora and M. A. McHugh, Fluid Phase Equilib., 157, 285 (1999).
Y. S. Jang, Y. S. Choi and H. S. Byun, Korean J. Chem. Eng., 32, 958 (2015).
S. E. Kim, S.D. Yoon, K. P. Yoo and H. S. Byun, Korean J. Chem. Eng., 26, 199 (2009).
P.K. Behrenst and S. I. Sandle, J. Chem. Eng. Data, 28, 52 (1983).
C.Y. Tsang and W.B. Streett, J. Chem. Eng. Data, 26, 155 (1981).
S.G. Nam and B.C. Lee, Korean J. Chem. Eng., 30, 474 (2013).
R.D. Chirico, M. Frenkel, V.V. Diky, K. N. Marsh and R. C. Wilhoit, J. Chem. Eng. Data, 48, 1344 (2003).
S.D. Yoon and H. S. Byun, J. Chem. Thermodyn., 71, 91 (2014).
B. E. Poling, J. M. Prausnitz and J. P. O’Connell, The Properties of Gases and Liquid, 5th Ed.; McGraw-Hill, New York (2001).
K. L. Albrecht, F.P. Stein, S. J. Han, C. J. Gregg and M. Radosz, Fluid Phase Equilib., 117, 84 (1996).
B.A. Wolf and G. J. Blaum, J. Polym. Sci., Polym. Phys. Ed., 13, 1115 (1975).
D. Patterson, Pure Appl. Chem., 31, 133 (1972).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Choi, YS., Chio, SW. & Byun, HS. Phase behavior for the poly(alkyl methacrylate)+supercritical CO2+DME mixture at high pressures. Korean J. Chem. Eng. 33, 277–284 (2016). https://doi.org/10.1007/s11814-015-0208-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-015-0208-6