Abstract
Real-time analysis of the deformation of surface coatings using laser-induced fluorescence microscopy (LIFM) has been demonstrated. An SiO2-TiO2 coating film doped with a fluorescent material by the sol-gel process was used, so that the changes in fluorescence intensity before and after corrosion could be monitored.
Similar content being viewed by others
References
D. I. Rozenfel, Corrosion inhibitors, McGraw-Hill Companies (1981).
A. L. Rudd, C. B. Breslin and F. Mansfeld, Corrosion Science, 42(2), 275 (2000).
G. P. Bierwagen, L. He, J. Li, L. Ellingson and D. E. Tallman, Progress in Organic Coatings, 39(1), 67 (2000).
C. J. Brinker and G.W. Scherer, Sol-gel science: The physics and chemistry of sol-gel processing, Academic Press (1990).
L. L. Hench and J. K. West, Chemical Reviews, 90(1), 33 (1990).
T. Q. Qiu and C. L. Tien, Int. J. Heat Mass Transfer, 35(3), 719 (1992).
H. E. Cline and T. R. Anthony, J. Appl. Phys., 48(9), 3895 (1977).
J. Mazumder and W. M. Steen, J. Appl. Phys., 51(2), 941 (1980).
Y. I. Nissim, A. Lietoila, R. B. Gold and J. F. Gibbons, J. Appl. Phys., 51(1), 274 (1980).
A. M. Prokhorov, V. I. Konov, I. Ursu and I. N. Mihailescu, Laser heating of metals, Adam Hilger (1990).
A.A. Panova, P. Pantano and D. R. Walt, Anal. Chem., 69(8), 1635 (1997).
J. R. Epstein and D. R. Walt, Chem. Soc. Rev., 32(4), 203 (2003).
M. Büchler, T. Watari and W. H. Smyrl, Corrosion Science, 42(9), 1661 (2000).
V. S. Agarwala, P. L. Reed and S. S. Ahmad, Corrosion Detection and Monitoring-A Review, CORROSION 2000 (2000).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lee, J. Real-time deformation monitoring of sol-gel-induced SiO2-TiO2 films using laser-induced fluorescence microscopy for corrosion protection. Korean J. Chem. Eng. 28, 1770–1772 (2011). https://doi.org/10.1007/s11814-011-0028-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-011-0028-2