Abstract
The kinetic behavior of a commercial γ-Al2O3 catalyst for the methanol to dimethyl ether (DME) dehydration reaction has been investigated using a differential fixed bed reactor at the pressure range 1–16 barg within a temperature range of 260–380 °C. The experimental runs were performed in a wide range of feed to water ratios. The experiments were designed by general full factorial design (GEFD) and a novel rate equation has been developed which exhibited the best fitting with our experimental data. Based on the analysis of variance (ANOVA), the following order of importance for operating conditions was obtained when the objective function is the yield of DME: Temperature >Water % in feed >Pressure. In addition, the optimum operating conditions for the maximum yield of DME, were found at T= 380°C, P=16 barg and zero wt% of water in the feed.
Similar content being viewed by others
References
F. Yaripour, F. Baghaei, I. Schmidt and J. Perregaard, Catal. Commun., 6, 147 (2005).
T. Takeguchi, K. Yanagisawa, T. Inui and M. Inoue, Appl. Catal. A: Gen., 192, 201 (2000).
S.D. Kim, S. C. Baek, Y. Lee, K. Jun and M. J. Kim, Appl. Catal. A: Gen., 309, 139 (2006).
M. Xu, J.H. Lunsforf, D.W. Goodman and A. Bhattacharyya, Appl. Catal. A: Gen., 149, 289 (1997).
S. H. Ahn, S. H. Kim, K. B. Jung and H. S. Hahm, Korean J. Chem. Eng., 25, 466 (2008).
A. T. Aguayo, J. Erena, I. Sierra, M. Olazar and J. Bilbao, Catal. Today, 106, 265 (2005).
S.B. Lee, W. Cho, D.K. Park and E. S. Yoon, Korean J. Chem. Eng., 23, 522 (2006).
Y. D. Yoo, S. J. Lee and Y. Yun, Korean J. Chem. Eng., 24, 350 (2007).
H. M. Shim, S. J. Lee, Y.D. Yoo, Y. S. Yun and H. T. Kim, Korean J. Chem. Eng., 26, 641 (2009).
K. Takeishi and H. Suzuki, Appl. Catal. A: Gen., 260, 111 (2004).
V. Vishwanathan, K.-W. Jun, J.-W. Kim and H.-S. Roh, Appl. Catal. A: Gen., 276, 251 (2004).
V. S. Kumar, A. H. Padmasri, C.V.V. Satyanayana, I.A.K. Reddy, B. D. Raju and K. S. R. Rao, Catal. Commun., 7, 745 (2006).
D. Mao, W. Yang, J. Xia, B. Zhang, Q. Song and Q. Chen, J. Catal., 230, 140 (2005).
G. Buelna and Y. S. Lin, Micro. Meso. Mater., 30, 359 (1999).
G. Buelna and Y. S. Lin, Micro. Meso. Mater., 42, 67 (2001).
Z.-M. Wang and Y. S. Lin, J. Catal., 174, 43 (1998).
Z. Nie, H. Liu, D. Liu, W. Ying and D. Fang, J. Nat. Gas Chem., 14, 22 (2005).
G. Bercic and J. Levec, Ind. Eng. Chem. Res., 31, 1035 (1992).
J.M. Camplo, A. Garcia, J. F. Herencia, D. Luna, J.M. Marinas and A. A. Romero, J. Catal., 151, 307 (1999).
F. Arena, R. Dario and A. Parmaliana, Appl. Catal. A: Gen., 170, 127 (1998).
D.C. Montgomery, Design and analysis of experiments, John Wiley and Sons, New York (1996).
G. E. Dieter, Engineering design: A material and processing approach, McGraw-Hill, Inc., New York (1991).
M. S. Phadke, Quality engineering using robust design, Prentice-Hall, Englewood Cliffs, NJ (1989).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Moradi, G., Yaripour, F., Abbasian, H. et al. Intrinsic reaction rate and the effects of operating conditions in dimethyl ether synthesis from methanol dehydration. Korean J. Chem. Eng. 27, 1435–1440 (2010). https://doi.org/10.1007/s11814-010-0238-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-010-0238-z