Abstract
Precise control of fiber diameter during electrospinning is very crucial for many applications. A systematic and quantitative study on the effects of processing variables enables us to control the properties of electrospun nanofibers. In this contribution, response surface methodology (RSM) was employed to quantitatively investigate the simultaneous effects of four of the most important parameters, namely solution concentration (C), spinning distance (d), applied voltage (V) and volume flow rate (Q), on mean fiber diameter (MFD) as well as standard deviation of fiber diameter (StdFD) in electrospinning of polyvinyl alcohol (PVA) nanofibers.
This is a preview of subscription content, access via your institution.
Similar content being viewed by others
References
G. I. Taylor, Proc. Roy. Soc. London, 313, 453 (1969).
J. Doshi and D. H. Reneker, J. Electrostatics, 35, 151 (1995).
H. Fong and D. H. Reneker, Electrospinning and the formation of nanofibers, in: D.R. Salem (Ed.), Structure formation in polymeric fibers, Hanser, Cincinnati (2001).
D. Li and Y. Xia, Adv. Mater., 16, 1151 (2004).
R. Derch, A. Greiner and J.H. Wendorff, Polymer nanofibers prepared by electrospinning, in: J. A. Schwarz, C. I. Contescu and K. Putyera (Eds.), Dekker encyclopedia of nanoscience and nanotechnology, CRC, New York (2004).
A. K. Haghi and M. Akbari, Phys. Stat. Sol. A, 204, 1830 (2007).
P.W. Gibson, H. L. Schreuder-Gibson and D. Rivin, AIChE J., 45, 190 (1999).
M. Ziabari, V. Mottaghitalab and A. K. Haghi, Korean J. Chem. Eng., 25, 923 (2008).
Z.M. Huang, Y. Z. Zhang, M. Kotaki and S. Ramakrishna, Compos. Sci. Technol., 63, 2223 (2003).
M. Li, M. J. Mondrinos, M.R. Gandhi, F.K. Ko, A. S. Weiss and P. I. Lelkes, Biomaterials, 26, 5999 (2005).
E.D. Boland, B. D. Coleman, C. P. Barnes, D.G. Simpson, G. E. Wnek and G. L. Bowlin, Acta Biomater., 1, 115 (2005).
J. Lannutti, D. Reneker, T. Ma, D. Tomasko and D. Farson, Mater. Sci. Eng. C, 27, 504 (2007).
J. Zeng, L. Yang, Q. Liang, X. Zhang, H. Guan, C. Xu, X. Chen and X. Jing, J. Control. Release, 105, 43 (2005).
E. R. Kenawy, G. L. Bowlin, K. Mansfield, J. Layman, D.G. Simpson, E. H. Sanders and G. E. Wnek, J. Control. Release, 81, 57 (2002).
M. S. Khil, D. I. Cha, H.-Y. Kim, I.-S. Kim and N. Bhattarai, J. Biomed. Mater. Res. Part B: Appl. Biomater., 67, 675 (2003).
B.M. Min, G. Lee, S.H. Kim, Y. S. Nam, T. S. Lee and W.H. Park, Biomaterials, 25, 1289 (2004).
X.H. Qin and S.Y. Wang, J. Appl. Polym. Sci., 102, 1285 (2006).
H. S. Park and Y. O. Park, Korean J. Chem. Eng., 22, 165 (2005).
J. S. Kim and D. H. Reneker, Poly. Eng. Sci., 39, 849 (1999).
S.W. Lee, S.W. Choi, S. M. Jo, B. D. Chin, D.Y. Kim and K.Y. Lee, J. Power Sources, 163, 41 (2006).
C. Kim, J. Power Sources, 142, 382 (2005).
N. J. Pinto, A. T. Johnson, A. G. MacDiarmid, C. H. Mueller, N. Theofylaktos, D. C. Robinson and F.A. Miranda, Appl. Phys. Lett., 83, 4244 (2003).
D. Aussawasathien, J.-H. Dong and L. Dai, Synthetic Met., 54, 37 (2005).
S.-Y. Jang, V. Seshadri, M.-S. Khil, A. Kumar, M. Marquez, P. T. Mather and G. A. Sotzing, Adv. Mater., 17, 2177 (2005).
S.-H. Tan, R. Inai, M. Kotaki and R. Ramakrishna, Polymer, 46, 6128 (2005).
A. Ziabicki, Fundamentals of fiber formation: The science of fiber spinning and drawing, Wiley, New York (1976).
A. Podgóski, A. Bałazy and L. Gradoń, Chem. Eng. Sci., 61, 6804 (2006).
B. Ding, M. Yamazaki and S. Shiratori, Sens. Actuators B, 106, 477 (2005).
J.R. Kim, S.W. Choi, S.M. Jo, W. S. Lee and B.C. Kim, Electrochim. Acta, 50, 69 (2004).
L. Moroni, R. Licht, J. de Boer, J. R. de Wijn and C.A. van Blitterswijk, Biomaterials, 27, 4911 (2006).
T. Wang and S. Kumar, J. Appl. Polym. Sci., 102, 1023 (2006).
W. Cui, X. Li, S. Zhou and J. Weng, J. Appl. Polym. Sci., 103, 3105 (2007).
S. Sukigara, M. Gandhi, J. Ayutsede, M. Micklus and F. Ko, Polymer, 45, 3701 (2004).
S.Y. Gu, J. Ren and G. J. Vancso, Eur. Polym. J., 41, 2559 (2005).
S. Y. Gu and J. Ren, Macromol. Mater. Eng., 290, 1097 (2005).
O. S. Yördem, M. Papila and Y. Z. Menceloğlu, Mater. Design, 29, 34 (2008).
I. Sakurada, Polyvinyl alcohol fibers, CRC, New York (1985).
F. L. Marten, Vinyl alcohol polymers, in: H. F. Mark (Ed.), Encyclopedia of polymer science and technology, 3rd ed., vol. 8, Wiley (2004).
Y.D. Kwon, S. Kavesh and D.C. Prevorsek, U.S. Patent, 4,440,711 (1984).
S. Kavesh and D. C. Prevorsek, U.S. Patent, 4,551,296 (1985).
H. Tanaka, M. Suzuki and F. Uedo, U.S. Patent, 4,603,083 (1986).
G. Paradossi, F. Cavalieri, E. Chiessim, C. Spagnoli and M. K. Cowman, J. Mater. Sci.: Mater. Med., 14, 687 (2003).
G. Zheng-Qiu, X. Jiu-Mei and Z. Xiang-Hong, Biomed. Mater. Eng., 8, 75 (1998).
M. Oka, K. Ushio, P. Kumar, K. Ikeuchi, S.H. Hyon, T. Nakamura and H. Fujita, P. I. Mech. Eng. H, 214, 59 (2000).
K. Burczak, E. Gamian and A. Kochman, Biomaterials, 17, 2351 (1996).
J.K. Li, N. Wang and X. S. Wu, J. Control. Release, 56, 117 (1998).
A. S. Hoffman, Adv. Drug Delivery Rev., 43, 3 (2002).
J. Zeng, A. Aigner, F. Czubayko, T. Kissel, J.H. Wendorff and A. Greiner, Biomacromolecules, 6, 1484 (2005).
K. H. Hong, Polym. Eng. Sci., 47, 43 (2007).
M. Ziabari, V. Mottaghitalab and A. K. Haghi, Korean J. Chem. Eng., 25, 919 (2008).
M. Ziabari, V. Mottaghitalab and A.K. Haghi, Braz. J. Chem. Eng., 26, 53 (2009).
M. Ziabari, V. Mottaghitalab, S. T. McGovern and A. K. Haghi, Nanoscale Res. Lett., 2, 597 (2007).
M. Ziabari, V. Mottaghitalab and A. K. Haghi, Korean J. Chem. Eng., 25, 905 (2008).
L.H. Sperling, Introduction to physical polymer science, 4th ed., Wiley, New Jersey (2006).
J.C. J. F. Tacx, H.M. Schoffeleers, A.G. M. Brands and L. Teuwen, Polymer, 41, 947 (2000).
F.K. Ko, Nanofiber technology, in: Y. Gogotsi (Ed.), Nanomaterials handbook, CRC, Boca Raton (2006).
A. Koski, K. Yim and S. Shivkumar, Mater. Lett., 58, 493 (2004).
D.C. Montgomery, Design and analysis of experiments, 5th ed., Wiley, New York (1997).
A. Dean and D. Voss, Design and analysis of experiments, Springer, New York (1999).
G. E. P. Box and N. R. Draper, Response surfaces, mixtures, and ridge analyses, Wiley, New Jersey (2007).
K.M. Carley, N.Y. Kamneva and J. Reminga, Response surface methodology, CASOS Technical Report, CMU-ISRI-04-136 (2004).
S. Weisberg, Applied linear regression, 3rd ed., Wiley, New Jersey (2005).
C. Zhang, X. Yuan, L. Wu, Y. Han and J. Sheng, Eur. Polym. J., 41, 423 (2005).
Q. Li, Z. Jia, Y. Yang, L. Wang and Z. Guan, Preparation and properties of poly(vinyl alcohol) nanofibers by electrospinning, Proceedings of IEEE International Conference on Solid Dielectrics, Winchester, U.K. (2007).
C. Mit-uppatham, M. Nithitanakul and P. Supaphol, Macromol. Chem. Phys., 205, 2327 (2004).
Y. J. Ryu, H. Y. Kim, K. H. Lee, H. C. Park and D. R. Lee, Eur. Polym. J., 39, 1883 (2003).
T. Jarusuwannapoom, W. Hongrojjanawiwat, S. Jitjaicham, L. Wannatong, M. Nithitanakul, C. Pattamaprom, P. Koombhongse, R. Rangkupan and P. Supaphol, Eur. Polym. J., 41, 409 (2005).
S.C. Baker, N. Atkin, P. A. Gunning, N. Granville, K. Wilson, D. Wilson and J. Southgate, Biomaterials, 27, 3136 (2006).
S. Sukigara, M. Gandhi, J. Ayutsede, M. Micklus and F. Ko, Polymer, 44, 5721 (2003).
X. Yuan, Y. Zhang, C. Dong and J. Sheng, Polym. Int., 53, 1704 (2004).
C. S. Ki, D. H. Baek, K. D. Gang, K. H. Lee, I. C. Um and Y. H. Park, Polymer, 46, 5094 (2005).
J.M. Deitzel, J. Kleinmeyer, D. Harris and N.C. Beck Tan, Polymer, 42, 261 (2001).
C. J. Buchko, L. C. Chen, Y. Shen and D. C. Martin, Polymer, 40, 7397 (1999).
J. S. Lee, K. H. Choi, H. D. Ghim, S. S. Kim, D. H. Chun, H.Y. Kim and W. S. Lyoo, J. Appl. Polym. Sci., 93, 1638 (2004).
S. F. Fennessey and R. J. Farris, Polymer, 45, 4217 (2004).
S. Kidoaki, I.K. Kwon and T. Matsuda, Biomaterials, 26, 37 (2005).
X. Zong, K. Kim, D. Fang, S. Ran, B. S. Hsiao and B. Chu, Polymer, 43, 4403 (2002).
D. Li and Y. Xia, Nano. Lett., 3, 555 (2003).
W.-Z. Jin, H.-W. Duan, Y.-J. Zhang and F.-F. Li, Nonafiber membrane of EVOH-based ionomer by electrospinning, Proceedings of the 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Zhuhai, China (2006).
X.M. Mo, C.Y. Xu, M. Kotaki and S. Ramakrishna, Biomaterials, 25, 1883 (2004).
S. Zhao, X. Wu, L. Wang and Y. Huang, J. Appl. Polym. Sci., 91, 242 (2004).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ziabari, M., Mottaghitalab, V. & Haghi, A.K. A new approach for optimization of electrospun nanofiber formation process. Korean J. Chem. Eng. 27, 340–354 (2010). https://doi.org/10.1007/s11814-009-0309-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-009-0309-1