Abstract
The mixing performance of a new type of mixing equipment which has several fin oscillators on a pair of shafts with a vibrating motor was investigated. This mixing equipment, which is mainly used for industrial plating processes, was usually operated at a vibrating frequency of about 40 Hz with the amplitude 1 mm. The flow visualization in this equipment showed that the flow in the vessel at laminar flow region was vertically divided into two distinct symmetric regions. The numerical simulation of the flow and the mixing patterns agreed well with the visualization result at laminar flow region.
References
Y. S. Lee, S.G. Lee and J. S. Kim, Korean Chem. Eng. Res, 33, 46 (1995).
Y. S. Lee, M. G. Kim and Y. Kato, Korean Chem. Eng. Res, 39, 536 (2001).
S. Hiraoka, Y. Tada, Y. Kato, A. Matsuura, T. Yamaguchi and Y. S. Lee, J. Chem. Eng. Japan, 34, 1499 (2001).
Y. S. Lee and Y. Kato, J. Korean Ind. Eng. Chem., 16, 698 (2005).
R. Ohmasa, Kagaku Souchi, 36, 100 (1994).
Y. Kato, S. Hiraoka, Y. Tada, K. Mase, R. Ohmasa, T. Yamaguchi, S. T. Koh and Y. S. Lee, J. Chem. Eng. Japan, 34, 649 (2002).
Y. Kato, S. Hiraoka, Y. Tada, A. Matuura, S. Fukumoto, R. Ohmasa, S. T. Koh and Y. S. Lee, Kagaku Kogaku Ronbunshu, 29, 596 (2003).
Y. Kato, S. Hiraoka, Y. Tada, A. Matuura, S. Fukumoto, R. Ohmasa, S. T. Koh and Y. S. Lee, Kasika Jyouhou Gakkai Ronbunshu, 23, 88 (2003).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kato, Y., Hiraoka, S., Fukumoto, S. et al. Flow visualization and numerical analysis of a new mixing equipment with vibratory fins. Korean J. Chem. Eng. 27, 1–5 (2010). https://doi.org/10.1007/s11814-009-0287-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-009-0287-3