Abstract
This paper presents a technique to reproduce compatible seismograms involving permanent displacement effects at sites close to the fault source. A multi-objective evolutionary algorithm is used to minimize the differences between the response spectra and multi-tapered power spectral densities corresponding to the recorded and simulated waveforms. The multi-taper method is used to reduce the spectral leakage that is inherent in the Fourier transformed form of waveforms, leading to a reduction of variance in power spectral amplitudes, thus permitting the calibration of the two sets of data. The technique is implemented using the 1998-Fandoqa (Iran) earthquake data and the results are compared with the actual observed data. Additionally, a comparison is made with a SAR interferometry study leading to fair agreement with the reported dislocation along the main fault. The simulation procedure and results are discussed and assessed concluding that, although the technique may be associated with uncertainties, it can still be used to reproduce waveforms at near source sites that include permanent dislocation, and can be used for seismic performance evaluation of structures in the region under study.
Similar content being viewed by others
Reference
Akkar S and Boore DM (2009), “On Baseline Corrections and Uncertainty in Response Spectra for Baseline Variations Commonly Encountered in Digital Accelerograph Records,” Bulletin of Seismology Society of America, 99: 1671–1690.
Archuleta RJ and Frazier GA (1978), “Threedimensional Numerical Simulation of Dynamic Faulting in a Half-space,” Bulletin of the Seismological Society of America, 68: 541–572.
Ashkpour Motlagh Sh and Mostafazadeh M (2008), “Source Parameters of the Mw 6.6 Fandoqa (SE Iran) Earthquake of March 14, 1998,” JSEE, 10(1): 1–10.
Berberian M, Jackson JA, Fielding E, Parsons BE, Priestley K, Qorashi M, Talebian M, Walker R, Wright TJ and Baker C (2001), “The 1998 March 14 Fandoqa Earthquake (Mw 6.6) in Kerman Province, Southeast Iran: Re-rupture of the 1981 Sirch Earthquake Fault, Triggering of Slip on Adjacent Thrusts and the Active Tectonics of the Gowk Fault Zone,” Geophys. J. Int., 146: 371–398.
Beresnev IA and Atkinson GM (1997), “Modeling finitefault radiation from the ωnspectrum,” Bulletin of the Seismological Society of America, 87(1): 67–84.
Beresnev IA and Atkinson GM (2002), “Source Parameters of Earthquakes in Eastern and Western North America Based on Finite-fault Modeling,” Bulletin of the Seismological Society of America, 92: 695–710.
BHRC (Building and Housing Research Center), Iran Strong Motion Network (ISMN), http://www.bhrc.ac.ir/Portal/Default.aspx?alias=www.bhrc.ac.ir/Portal/ismnen.
Blasco X, Herrero JM, Sanchis J and Martinez M (2008), “A New Graphical Visualization of n-dimensional Pareto Front for Decision-making in Multiobjective Optimization,” Information Sciences, 178: 3908–3924.
Boore DM (1983), “Stochastic Simulation of Highfrequency Ground Motions Based on Seismological Models of the Radiated Spectra,” Bulletin of the Seismological Society of America, 73: 1865–1894.
Boore DM (2001), “Effect of Baseline Corrections on Displacement and Response Spectra for Several Recordings of the 1999 Chi-Chi, Taiwan, Earthquake,” Bulletin of the Seismological Society of America, 91: 1199–1211.
Boore DM, Stephens CD and Joyner WB (2002), “Comments on Baseline Correction of Digital Strong-Motion Data: Examples from the 1999 Hector Mine, California, Earthquake,” Bulletin of the Seismological Society of America, 92(4): 1543–1560.
Bouchon M, Toksoz N, Karabulut H, Bouin MP, Dietrich M, Aktar M and Edie M (2000), “Seismic Imaging of the 1999 Izmit (Turkey) Rupture Inferred from the Nearfault Recordings,” Geophys. Res. Lett., 27: 3013–3016.
Bray JD and Rodriguez-Marek A (2004), “Characterization of Forward-directivity Ground Motions in the Near-fault Region,” Soil Dynamics and Earthquake Engineering, 24: 815–828.
Brune JN (1970), “Tectonic Stress and the Spectra of Seismic Shear Waves from Earthquakes,” J. Geophys. Res., 75: 4997–5010.
Coello A and Lechuga MS (2002), “Mopso: A Proposal for Multiple Objective Particle Swarm Optimization,” IEEE Proceedings: World Congress on Computational Intelligence (CEC2002), pp.1051–1056.
Fieldsend JE and Singh S (2002), “A Multi-objective Algorithm Based upon Particle Swarm Optimization, an Efficient Data Structure and Turbulence,” The 2002 U.K. Workshop on Computational Intelligence, U.K., pp.34–44.
Hisada Y and Bielak J (2003), “A Theoretical Method for Computing Near-fault Ground Motions in Layered Half-Spaces Considering Static Offset Due to Surface Faulting, with a Physical Interpretation of Fling Step and Rupture Directivity,” Bulletin of the Seismological Society of America, 90(2): 387–400.
Hu X and Eberhart R (2002), “Multiobjective Optimization Using Dynamic Neighborhood Particle Swarm Optimization,” IEEE Proceedings: World Congress on Computational Intelligence (CEC2002), pp.1677–1681.
IIEES (International Institute of Earthquake Engineering and Seismology), http://www.iiees.ac.ir/English.
Iwan WD, Moser MA and Peng CY (1985), “Some Observations on Strong-motion Earthquake Measurement Using a Digital Accelerograph,” Bulletin of the Seismological Society of America, 75: 1225–1246.
Kennedy J and Eberhart RC (1995), “Particle Swarm Optimization,” PhD Thesis, IEEE International Conference On Neural Networks, Perth, Australia, pp.1942–1948.
Mai PM and Beroza GC (2003), “A Hybrid Method for Calculating Near-source, Broadband Seismograms: Application to Strong Motion Prediction,” Phys. Earth Planet. Int., 137(1–4): 183–199.
Mostaghim S (2004), “Multi-objective Evolutionary Algorithms,” PhD Thesis, Paderbon University.
Nicknam A and Eslamian Y (2010), “A Hybrid Method for Simulating Near-source, Broadband Seismograms: Application to the 2003 Bam Earthquake (Mw 6.5),” Tectonophysics, 487: 46–58.
Nicknam A and Eslamian Y (2011), “An EGF-based Methodology for Predicting Compatible Seismograms in Spectral Domain Using GA,” Geophysical Journal International, 185: 557–573.
Park J, Lindberg CR and Vernon FL (1987), “Multitaper Spectral Analysis of High-frequency Seismograms,” Journal of Geophysical Research, 92: 12675–12684.
Percival DB and Walden AT (1998), Spectral Analysis for Physical Applications, Cambridge University Press, First published 1993, Reprinted with Correction 1998.
Prieto GA, Parker RL, Thomson DJ, Vernon FL and Graham RL (2007), “Reducing the Bias of Multitaper Spectrum Estimates,” Geophysical Journal International, 171: 1269–1281.
Somerville PG, Smith NF, Graves RW and Abrahamson NA (1997), “Modification of Empirical Strong Ground Motion Attenuation Relations to Include the Amplitude and Duration Effects of Rupture Directivity,” Seism. Res. Lett., 68: 199–222.
Spudich P and Archuleta R (1987), “Techniques for Earthquake Ground Motion Calculation with Applications to Source Parameterization of Finite Faults,” Bolt BA, Seismic Strong Motion Synthetics, OrlandoFL: Academic Press, pp.205–265.
Thomson DJ (1982), “Spectrum Estimation and Harmonic Analysis,” Proceedings of the IEEE, Vol.70, pp.1055–1096.
Ventura CE, Archila M, Bebamzadeh A and Liam Finn WD (2011), “Large Coseismic Displacements and Tall Buildings,” The Structural Design of Tall and Special Buildings, 20: S85–S9.
Xie LL, Xu LJ and Adrian Rodriguez-Marek (2005), “Representation of Near-fault Pulse-type Ground Motions,” Earthquake Engineering and Engineering Vibration, 4(2): 191–199.
Zhang XZ, Hu JJ, Xie LL and Wang HY (2006), “Kinematic Source Model for Simulation of Near-fault Ground Motion Field Using Explicit Finite Element Method,” Earthquake Engineering and Engineering Vibration, 5(1): 19–28.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Nicknam, A., Hosseini, A., Jamnani, H.H. et al. Reproducing fling-step and forward directivity at near source site using of multi-objective particle swarm optimization and multi taper. Earthq. Eng. Eng. Vib. 12, 529–540 (2013). https://doi.org/10.1007/s11803-013-0194-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11803-013-0194-9