Abstract
The reliability of a vertical breakwater is calculated using direct integration methods based on joint density functions. The horizontal and uplifting wave forces on the vertical breakwater can be well fitted by the lognormal and the Gumbel distributions, respectively. The joint distribution of the horizontal and uplifting wave forces is analyzed using different probabilistic distributions, including the bivariate logistic Gumbel distribution, the bivariate lognormal distribution, and three bivariate Archimedean copulas functions constructed with different marginal distributions simultaneously. We use the fully nested copulas to construct multivariate distributions taking into account related variables. Different goodness fitting tests are carried out to determine the best bivariate copula model for wave forces on a vertical breakwater. We show that a bivariate model constructed by Frank copula gives the best reliability analysis, using marginal distributions of Gumbel and lognormal to account for uplifting pressure and horizontal wave force on a vertical breakwater, respectively. The results show that failure probability of the vertical breakwater calculated by multivariate density function is comparable to those by the Joint Committee on Structural Safety methods. As copulas are suitable for constructing a bivariate or multivariate joint distribution, they have great potential in reliability analysis for other coastal structures.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Balas, C. E., and Koc, L., 2002. Risk assessment of vertical breakwaters–A case study in Turkey. China Ocean Engineering, 16(1): 123–134.
Burcharth, H. F., Sorensen, J. D., and Christian, E., 1994. On the evaluation of failure probability of monolithic vertical wall breakwaters. Proceedings of Wave Barriers in Deepwaters. Yokosuka, Japan, 458–468.
Castillo, C., Minguez, R., Castillo, E., and Losada, M. A., 2006. An optimal engineering design method with failure rate constraints and sensitivity analysis. Application to composite breakwaters. Coastal Engineering, 53(1): 1–25.
Corbella, S., and Stretch, D. D., 2012. Predicting coastal erosion trends using non-stationary statics and process-based models. Coastal Engineering, 70: 40–49.
Corbella, S., and Stretch, D. D., 2013. Simulating a multivariate sea storm using Archimedean copulas. Coastal Engineering, 76: 68–78.
Dong, H. K., and Woo, S. P., 2005. Neural network for design and reliability analysis of rubble mound breakwaters. Ocean Engineering, 32: 1332–1349.
Dong, S., Gao, J. G., Li, X., and Wei, Y., 2015. A storm surge intensity classification based on extreme water level and concomitant wave height. Journal of Ocean University of China, 14(2): 237–244.
Eryilmaz, S., 2011. Estimation in coherent reliability systems through copulas. Reliability Engineering & System Safety, 96(5): 564–568.
Gumbel, E. J., 1961. Bivariate logistic distributions. Journal of the American Statistical Association, 56: 335–349.
Goda, K., 2010. Statistical modeling of joint probability distribution using copula: Application to peak and permanent displacement seismic demands. Structural Safety, 32(2): 112–123.
Goda, Y., and Takagi, H., 2000. A reliability design method of caisson breakwaters with optimal wave heights. Coastal Engineering Journal, 42(4): 357–387.
Grimaldi, S., and Serinaldi, F., 2006. Asymmetric copula in multivariate flood frequency analysis. Advances in Water Resources, 29(8): 1155–1167.
Hasofer, A. M., and Lind, N. C., 1974. Exact and invariant second-moment code format. Journal of the Engineering Mechanics Division, 100(1): 111–121.
Hofert, M., 2011. Efficiently sampling nested Archimedean copulas. Computational Statistics and Data Analysis, 55(1): 57–70.
Kaidi, S., Rouainia, M., and Ouahsine, A., 2012. Stability of breakwaters under hydrodynamic loading using a coupled DDA/FEM approach. Ocean Engineering, 55: 62–70.
Kiureghian, A. D., Lin, H. Z., and Hwang, S. J., 1987. Second order reliability approximations. Journal of Engineering mechanics, 113(8): 1208–1225.
Knut, O. R., 1990. Reliability analysis of a coastal dike. Coastal Engineering, 14(1): 43–56.
Liu, Y., and Xie, S. L., 1993. Determination of partial factors for the vertical breakwaters. Port Engineering Technology, (4): 1–5 (in Chinese).
Ma, M. W., Ren, L. L., Song, S. B., Song, J. L., and Jiang, S. H., 2013. Goodness-of-fit tests for multi-dimensional copulas: Expanding application to historical drought data. Water Science and Engineering, 6(1): 18–30.
Mase, H., Tsujio, D., Yasuda, T., and Mori, N., 2013. Stability analysis of composite breakwater with wave-dissipating blocks considering increase in sea levels, surges and waves due to climate change. Ocean Engineering, 71: 58–65.
Mehmet, L. K., 2009. Risk assessment of a vertical breakwater using possibility and evidence theories. Ocean Engineering, 36: 1060–1066.
Mehmet, L. K., and Can, E. B., 2012. Reliability analysis of a rubble mound breakwater using theory of fuzzy random variables. Applied Ocean Research, 39: 83–88.
Nelsen, R. B., 2005. An Introduction to Copulas. 2nd edition. Springer, New York, 17–24.
Onoufriou, T., and Forbes, V. J., 2001. Developments in structural system reliability assessments of fixed steel offshore platforms. Reliability Engineering & System Safety, 71(2): 189–199.
Qie, L. W., and Li, Y. B., 2004. Reliability index of caisson breakwaters for load variables correlated. China Ocean Engineering, 18(4): 577–584.
Repko, P. H. A. J. M., Van, G. H. G. V., and Vrijling, J. K., 2004. Bivariate description of offshore wave conditions with physics-based extreme value statistics. Applied Ocean Research, 26: 162–170.
Roberto, M., and Enrique, C., 2009. Reliability-based optimization in engineering using decomposition techniques and FORMS. Structural Safety, 31(3): 214–223.
Suh, K. D., Kim, S. W., Kim, S., and Cheon, S., 2013. Effects of climate change on stability of caisson breakwaters in different water depths. Ocean Engineering, 71: 103–112.
Takayama, T., and Ikeda, N., 1992. Estimation of sliding failure probability of present breakwaters for probabilistic design. Report of the Port and Harbour Research Institute, 31(5): 3–32.
Tang, X. S., Li, D. Q., Zhou, C. B., and Phoon, K. K., 2013. Modeling bivariate distribution using copulas and its application to component reliability analysis. Engineering Mechanics, 30(12): 8–17, 42 (in Chinese).
Tarkan, E., 2009. Fuzzy logic approach to conventional rubble mound structures design. Expert Systems with Applications, 36(3): 4162–4170.
Waal, D. J. D., and Gelder, P. H. A. J. M. V., 2005. Modelling of extreme wave heights and periods through copulas. Extremes, 8(4): 345–356.
Xie, S. L., and Liu, Y., 1992. Reliability based design of vertical breakwaters. Proceedings of International Conference on Port Development for the Next Millennium. Hong Kong Institution of Engineers, Hong Kong, 419–423.
Xie, S. L., and Liu, Y., 1994. Design method of breakwaters based on reliability theory. Acta Oceanologica Sinica, 16(5): 126–129 (in Chinese).
Yue, S., 2000. The Gumbel logistic model for representing a multivariate storm event. Advances in Water Resources, 24(2): 179–185.
Zeng, X. X., Ren, J. C., Wang, Z., and Marshall, S., 2013. Copulas for statistical signal processing (Part I): Extensions and generalization. Signal Processing, 94: 691–702.
Zhang, W., and Cui, W. C., 1997. Direct integration method about structural reliability. Journal of Shanghai Jiaotong University, 31(2): 114–116 (in Chinese).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Dong, S., Li, J., Li, X. et al. Study of vertical breakwater reliability based on copulas. J. Ocean Univ. China 15, 232–240 (2016). https://doi.org/10.1007/s11802-016-2692-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11802-016-2692-7