Skip to main content
Log in

Design and implementation of the optical fiber control and transmission module in multi-channel broadband digital receiver

  • Published:
Optoelectronics Letters Aims and scope Submit manuscript

Abstract

An optical fiber control and transmission module is designed and realized based on Virtex-7 field programmable gata array (FPGA), which can be applied in multi-channel broadband digital receivers. The module consists of sampling data transfer submodule and multi-channel synchronous sampling control submodule. The sampling data transmission in 4× fiber link channel is realized with the self-defined transfer protocol. The measured maximum data rate is 4.97 Gbyte/s. By connecting coherent clocks to the transmitter and receiver endpoints and using the self-defined transfer protocol, multi-channel sampling control signals transferred in optical fibers can be received synchronously by each analog-to-digital converter (ADC) with high accuracy and strong anti-interference ability. The module designed in this paper has certain reference value in increasing the transmission bandwidth and the synchronous sampling accuracy of multi-channel broadband digital receivers.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Bueno E. J., Hernandez A. and Rodriguez F. J., IEEE Transactions on Industrial Electronics 56, 654 (2009).

    Article  Google Scholar 

  2. Kam D. G., Ritter M. B., Beukema T. J., IEEE Transactions on Advanced Packaging 32, 328 (2009).

    Article  Google Scholar 

  3. Cao Jian-wen, Design of High Speed Serial Bus System, Harbin Engineering University, 8 (2008).

    Google Scholar 

  4. Mike Peng Li, Joel Martinez and Derek Vaughan, Electronic Engineering Times 16, 35 (2012).

    Google Scholar 

  5. Masato Yoshida, Tatsunori Omiya, Keisuke Kasai and Masataka Nakazawa, Real-time FPGA-based Coherent Optical Receiver for 1 Gsymbol/s, 64 QAM Transmission, Optical Fiber Communication Conference, 1 (2011).

    Google Scholar 

  6. He Lin-fei, Tian Jia-yue and Zhang Xiao-lin, Application of Electronic Technique 39, 77 (2013).

    Google Scholar 

  7. Reuter L., Weigel R. and Fischer G., A 16-channel Synchronous Sampling power Measurement System for Wireless Health Assistance Devices, IEEE International Symposium on Medical Measurements and Applications Proceedings, 1 (2012).

    Chapter  Google Scholar 

  8. Yang Yuan-yuan, Electronic Information Warfare Technology 29, 65 (2014).

    Google Scholar 

  9. Predehl K., Grosche G. and Raupach S. M. F., Science 336, 441 (2012).

    Article  ADS  Google Scholar 

  10. 7 Series FPGAs GTX/GTH Transceivers, USA, Xilinx Corporation, April 22, 100 (2013).

  11. LogiCORE IP Aurora 64B/66B v7.3 Product Guide, USA, Xilinx Corp, December 18, 33 (2012).

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Ying-xiao Zhao  (赵英潇).

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhao, Yx., Zhang, Y., Fan, Lj. et al. Design and implementation of the optical fiber control and transmission module in multi-channel broadband digital receiver. Optoelectron. Lett. 10, 369–373 (2014). https://doi.org/10.1007/s11801-014-4109-4

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11801-014-4109-4

Keywords

Navigation