Abstract
Optimized 2×2 switches based on silicon-on-insulator (SOI) were demonstrated. In the design, single mode rib waveguides and multimode interferences (MMIs) are connected by tapered waveguides to reduce the mode coupling loss between the two types of waveguides. The average insertion loss of the switches is about −16.9 dB and the excess loss of one is measured of −1.3 dB. The worst crosstalk is larger than 25 dB. Experimental results indicate that some of the main characteristics of optical switches are improved in the modified design, which is according with theoretic analysis. The novel design can be used to improve the characteristics of optical switch matrixes based on 2×2 switch units.
Similar content being viewed by others
References
Eric Cassan, Suzanne Laval, Sébastien Lardenois, and Alain Koster, IEEE Journal of selected topic in quantum electronics, 9(2003), 460.
Hongzhen Wei, Jinzhong Yu, Xiaofeng Zhang, and Zhongli Liu, Optics Letters., 26(2001), 878.
A House, R Whitemen, L Kling, S Day, A Knights, D Hogan, F Hopper, and M Asghari, OFC2003, 2 (2003), 449.
Jingwei Liu, Jinzhong Yu, Shaowu Chen, and Zhiyong Li, IEEE Photonics Technology Letters., 17 (2005), 1187.
R M Lorenzo, C Lorente, E J Abril, and M. Lopez, IEEE. Proc. Optoelectronics, 145 (1998), 65.
Jinsong Xia, Jinzhong Yu, Yanping Li, and Shaowu Chen, Optical Engineering, 43 (2004), 1953.
Author information
Authors and Affiliations
Corresponding author
Additional information
This work was supported in part by the National Science Foundation of China (Grant No.60577044) and the Ministry of Science and Technology “973” Plan (No.2006CB302803)
Rights and permissions
About this article
Cite this article
Li, Zy., Chen, Sw. & Yu, Jz. Optimization of silicon-on-insulator based optical switch using tapered waveguides. Optoelectron. Lett. 3, 326–328 (2007). https://doi.org/10.1007/s11801-007-7008-0
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11801-007-7008-0