Abstract
This study proposed the design, fabrication, and assembly of membrane integrity detection instruments in membrane bioreactors (MBR) based on fluorescence spectroscopy. Based on the PARAFAC model, we found that the peak at 280/335 nm strengthened after membrane breakage. The peak at 340/430 nm reflected the sludge concentration in the MBR and reduced the influence of internal filtration effects on detection. Therefore, we determined that the dual-LED light source excitation detection system can detect tryptophan-like substances at 280 nm (T-peak) and humic acid at 340 nm (C-peak). T-peak was identified as the core index indicating membrane integrity. Moreover, the C-peak is the reference indicator factor for a sensitive response to changes in the sludge concentration. The portable fluorescence instrument exhibited high sensitivity and good feedback accuracy compared to particle counting and turbidity detection, where the log reduction value was greater than 3.5. This overcomes the disadvantage of false alarms in particle counters and is not affected by the position of the pump system. This portable instrument provides a flexible and highly sensitive method for the assessment of industrial membrane integrity.
References
Antony A, Blackbeard J, Leslie G (2012). Removal efficiency and integrity monitoring techniques for virus removal by membrane processes. Critical Reviews in Environmental Science and Technology, 42(9): 891–933
Banerjee A, Lambertson M, Lozier J, Colvin C (2001). Monitoring membrane integrity using high sensitivity laser turbidimetry. Water Science and Technology: Water Supply, 1(5–6): 273–276
Bridgeman J, Baker A, Brown D, Boxall J (2015). Portable LED fluorescence instrumentation for the rapid assessment of potable water quality. Science of the Total Environment, 524–525: 338–346
Bridgeman J, Baker A, Carliell-Marquet C, Carstea E (2013). Determination of changes in wastewater quality through a treatment works using fluorescence spectroscopy. Environmental Technology, 34(23): 3069–3077
Carstea E M, Bridgeman J, Baker A, Reynolds D M (2016). Fluorescence spectroscopy for wastewater monitoring: a review. Water Research, 95: 205–219
Choi S H, Yang J, Suh C, Cho J (2011). Use of fluorescent silica particles for checking the integrity of microfiltration membranes. Journal of Membrane Science, 367(1–2): 306–313
Deluhery J, Rajagopalan N (2008). Use of paramagnetic particles in membrane integrity testing. Journal of Membrane Science, 318(1–2): 176–181
Farahbakhsh K, Smith D (2004). Estimating air diffusion contribution to pressure decay during membrane integrity tests. Journal of Membrane Science, 237(1–2): 203–212
Giglia S, Krishnan M (2008). High sensitivity binary gas integrity test for membrane filters. Journal of Membrane Science, 323(1): 60–66
Gitis V, Haught R C, Clark R M, Gun J, Lev O (2006). Application of nanoscale probes for the evaluation of the integrity of ultrafiltration membranes. Journal of Membrane Science, 276(1–2): 185–192
Guo H, Wyart Y, Perot J, Nauleau F, Moulin P (2010a). Application of magnetic nanoparticles for UF membrane integrity monitoring at low-pressure operation. Journal of Membrane Science, 350(1–2): 172–179
Guo H, Wyart Y, Perot J, Nauleau F, Moulin P (2010b). Low-pressure membrane integrity tests for drinking water treatment: a review. Water Research, 44(1): 41–57
Heijnen M, Buchta P, Winkler R, Berg P (2013). Calculating particle log reduction values based on pressure decay tests on Multibore® hollow fibre membranes. Desalination and Water Treatment, 51(22–24): 4245–4252
Hornstra L M, Da Silva T R, Blankert B, Heijnen L, Beerendonk E, Cornelissen E R, Medema G (2019). Monitoring the integrity of reverse osmosis membranes using novel indigenous freshwater viruses and bacteriophages. Environmental Science. Water Research & Technology, 5(9): 1535–1544
Johnson W T (1998). Predicting log removal performance of membrane systems using in-situ integrity testing. Filtration & Separation, 35(1): 26–29
Krahnstöver T, Hochstrat R, Wintgens T (2019). Comparison of methods to assess the integrity and separation efficiency of ultrafiltration membranes in wastewater reclamation processes. Journal of Water Process Engineering, 30: 100646
Li P, Dong L, Jin H, Yang J, Tu Y, Wang C, He Y (2022). Fluorescence detection of phosphate in an aqueous environment by an aluminum-based metal-organic framework with amido functionalized ligands. Frontiers of Environmental Science & Engineering, 16(12): 159
Li W T, Jin J, Li Q, Wu C F, Lu H, Zhou Q, Li A M (2016). Developing LED UV fluorescence sensors for online monitoring DOM and predicting DBPs formation potential during water treatment. Water Research, 93: 1–9
Liu S, Shang E, Liu J, Wang Y, Bolan N, Kirkham M, Li Y (2022). What have we known so far for fluorescence staining and quantification of microplastics: a tutorial review. Frontiers of Environmental Science & Engineering, 16(1): 8
Naismith J (2005). Membrane integrity-Direct turbidity measurement of filtrate from MF membrane modules at an operating potable water treatment plant. Desalination, 179(1–3): 25–30
Panigrahi S K, Mishra A K (2019). Inner filter effect in fluorescence spectroscopy: as a problem and as a solution. Journal of Photochemistry and Photobiology C, Photochemistry Reviews, 41: 100318
Pype M L, Donose B C, Marti L, Patureau D, Wery N, Gernjak W (2016). Virus removal and integrity in aged RO membranes. Water Research, 90: 167–175
Rodríguez-Vidal F J, García-Valverde M, Ortega-Azabache B, González-Martínez À, Bellido-Fernández A (2020). Characterization of urban and industrial wastewaters using excitation-emission matrix (EEM) fluorescence: searching for specific fingerprints. Journal of Environmental Management, 263: 110396
Sheng G P, Yu H Q (2006). Characterization of extracellular polymeric substances of aerobic and anaerobic sludge using three-dimensional excitation and emission matrix fluorescence spectroscopy. Water Research, 40(6): 1233–1239
Shutova Y, Baker A, Bridgeman J, Henderson R (2016). On-line monitoring of organic matter concentrations and character in drinking water treatment systems using fluorescence spectroscopy. Environmental Science. Water Research & Technology, 2(4): 749–760
Singh S, Henderson R K, Baker A, Stuetz R M, Khan S J (2015). Online fluorescence monitoring of RO fouling and integrity: analysis of two contrasting recycled water schemes. Environmental Science. Water Research & Technology, 1(5): 689–698
Stedmon C A, Bro R (2008). Characterizing dissolved organic matter fluorescence with parallel factor analysis: a tutorial. Limnology and Oceanography: Methods, 6(11): 572–579
Vera M, Cruz S, Boleda M, Mesa J, Martin-Alonso J, Casas S, Gibert O, Cortina J (2017). Fluorescence spectroscopy and parallel factor analysis as a dissolved organic monitoring tool to assess treatment performance in drinking water trains. Science of the Total Environment, 584–585: 1212–1220
Wang Y, Jia H, Wang J, Cheng B, Yang G, Gao F (2018). Impacts of energy distribution and electric field on membrane fouling control in microbial fuel cell-membrane bioreactor (MFC-MBR) coupling system. Bioresource Technology, 269: 339–345
Ward J S, Lapworth D J, Read D S, Pedley S, Banda S T, Monjerezi M, Gwengweya G, Macdonald A M (2021). Tryptophan-like fluorescence as a high-level screening tool for detecting microbial contamination in drinking water. Science of the Total Environment, 750:141284
Xin C, Cheng Z, You Z, Bai H, Wang J (2020). Using EEM fluorescence to characterize the membrane integrity of membrane bioreactor (MBR). Journal of Membrane Science, 610: 118356
Xin C, Wang J, Jia H, Wen H, Li J (2019). Hollow fiber membrane integrity warning device based on laser extinction particles detection technology. Separation and Purification Technology, 224: 295–303
Yu J, Xiao K, Xue W, Shen Y X, Tan J, Liang S, Wang Y, Huang X (2020). Excitation-emission matrix (EEM) fluorescence spectroscopy for characterization of organic matter in membrane bioreactors: principles, methods and applications. Frontiers of Environmental Science & Engineering, 14(2): 31
Acknowledgements
This study was financially supported by the Research Agricultural Project of Tianjin (China) (No. JBGG202207), the support of Cangzhou Institute of Tiangong University (China) (No. TGCYY-F-0103) and Beijing Nova Program (China) (No. Z201100006820040). We also thanks for Analytical & Testing Center of Tiangong University (China) for SEM work.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of Interest The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.
Additional information
Highlights
• Double fluorescence peaks model is used to characterize membrane integrity.
• Tryptophan-like substances are used to detect membrane breakage.
• Double fluorescence peaks combination reduces the inner filter effect influence.
• The detection of the instrument is less affected by backwashing operation.
Supplementary Material
Rights and permissions
About this article
Cite this article
Yu, Y., Xin, C., Liu, Y. et al. Portable fluorescence instrument for detecting membrane integrity in membrane bioreactor (MBR). Front. Environ. Sci. Eng. 18, 23 (2024). https://doi.org/10.1007/s11783-024-1783-8
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11783-024-1783-8