Skip to main content
SpringerLink
Log in

Backfill support’s backfill and operation properties and evaluation

充填采煤液压支架充填与运转特性及评价

  • Published:
Journal of Central South University Aims and scope Submit manuscript

    We’re sorry, something doesn't seem to be working properly.

    Please try refreshing the page. If that doesn't work, please contact support so we can address the problem.

Abstract

To ensure compacted backfilling, it is essential to ensure the reliability of the performance of a solid backfill support, key equipment for integrating backfilling and mining. To evaluate the backfilling performance of a backfill support, the concept of backfill and operation properties is proposed in this study. Moreover, it is elaborated in terms of five aspects, namely, structural property, supporting property, tamping property, mechanical response property, and geological adaptation property, which are specifically reflected by 14 indexes including the supporting intensity and vertical roof gap. Seven separate evaluation indexes are selected to build a backfill and operation properties based system for evaluating the design schemes of the backfill support via a multi-index comprehensive evaluation method; then, the evaluation method and process together with measures to control the backfill and operation properties are proposed. By using this system, 11 schemes for optimizing the ZC5200/14.5/3 backfill support at Zhaizhen Coal Mine are evaluated, and scheme #10 is found to show superior vertical roof gap and other backfill and operation properties, thus demonstrating the reasonability of the evaluation system. On this basis, the backfill support research framework of designing initial scheme, optimizing design scheme, selecting the best evaluation indexes, evaluating optimizing scheme, and evaluating operation properties is built; this should serve as an important reference for further studies on the roof controlling performance of a backfill support.

摘要

充填采煤液压支架是充填采煤技术实现充采一体化的核心设备,其性能的可靠性是实现致密充 填的关键。为评价充填采煤液压支架的充填性能,本文提出充填运转特性的概念,并从结构特性、支 护特性、夯实特性、力学响应特性及地质适应特性5 个方面阐述其内涵,具体通过支护强度、夯实空 顶距等14 个指标综合体现。选择其中7 个独立的评价指标,采用多指标综合评价方法,构建了基于 充填运转特性的充填采煤液压支架设计方案评价体系,给出了评价的方法与流程,以及充填运转特性 工程控制措施。运用该体系评价了翟镇矿ZC5200/14.5/30 型充填采煤液压支架的11 个优化方案,评 选出的10#最佳方案在夯实离顶距等充填运转特性指标上具有明显优势,验证了评价体系的合理性。 基于此构建了“初始方案设计、设计方案优化、评价指标优选、优化方案评价、运转特性控制”的充填 采煤液压支架研究框架,为深入研究充填采煤液压支架控顶性能提供借鉴。

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. ZHANG Ji, ZHOU Yue, HUANG Yang. Integrated technology of fully mechanized solid backfill mining [J]. Coal Science and Technology, 2012, 40(11): 10–13. DOI: 10.13199/j.cst.2012.11.16.zhangjx.008. (in Chinese)

    Google Scholar 

  2. ZHANG JI-xiong, ZHOU Nan., HUANG Yang, ZHANG Qiang. Impact law of the bulk ratio of backfilling body to overlying strata movement in fully mechanized bacifilling mining [J]. Journal of Mining Science, 2011, 47(1): 73–84. DOI: 10.1134/S1062739147010096. (in Chinese)

    Article  Google Scholar 

  3. MIAO Xie, ZHANG JI-xiong, GUO Guang-Li. Study on waste-filling method and technology in fully-mechanized coal mining [J]. Journal of the China Coal Society, 2010, 35(1): 1–6. DOI: 10.13225/j.cnki.jccs.2010.01.006. (in Chinese)

    Google Scholar 

  4. MIAO Xie. Principle of underground pressure control in fully-mechanized coal mining with solid filling and force analysis of mining support [J]. Journal of China University of Mining and Technology, 2010, 39(6): 795–801. (in Chinese)

    Google Scholar 

  5. WANG Jia, YANG Sheng. Research on support-rock system in solid back-filling methods [J]. Journal of the China Coal Society, 2010, 35(11): 1821–1826. DOI: 10.13225/j.cnki.jccs.2010.11.010. (in Chinese)

    Google Scholar 

  6. CUI Yong, GUO Hai, JIN Tao. Design and study of six-legged supporting solid-filling hydraulic support [J]. Mining & Processing Equipment, 2011, 39(7): 21–24. DOI: 10.16816/j.cnki.ksjx.2011.07.006. (in Chinese)

    Google Scholar 

  7. ZHANG Qiang, ZHANG Ji, TAI Yang, JIA Hong, LI Meng. Study of factors influencing the gap between backfill hydraulic support and roof [J]. Journal of China University of Mining and Technology, 2014, 43(5): 757–764. DOI: 10.13247/j.cnki.jcumt.000200. (in Chinese)

    Google Scholar 

  8. ZHANG Qiang, ZHANG Ji, TAI Yang, JU Feng, SUN Qiang. The theoretical research on basic characteristics of backfilling hydraulic support and its application [J]. Journal of Mining and Safety Engineering, 2014, 31(6): 845–851. DOI: 10.13545/j.issn1673-3363.2014.06.003. (in Chinese)

    Google Scholar 

  9. ZHANG Qiang, ZHANG Ji, WU Xiao, HUANG Yan, ZHOU Nan. Roof gap rationality research of backfilling-coal mining hydraulic support [J]. Journal of the China Coal Society, 2013, 38(8): 1325–1330. DOI: 10.13225/j.cnki.jccs.2013.08.014. (in Chinese)

    Google Scholar 

  10. JUNKER M, WITTHAUS H. Progress in the research and application of coal mining with stowing [J]. International Journal of Mining Science and Technology, 2013, 23(1): 7–12. DOI: 10.1016/j.ijmst.2013.01.002.

    Article  Google Scholar 

  11. XU Jun, TAN Fu, JU Feng, AN Bai. Principle and structure of backfill supports with six props [J]. China Mining Magazine, 2011, 20(4): 101–104. DOI: 10.3969/j.issn.1004-4051.2011.04.027. (in Chinese)

    Google Scholar 

  12. BI Jin. Research on hydraulic powered support for coal mining with material backfilling [J]. Coal Science Technology, 2010, 38(11): 85–89. DOI: 10.13199/j.cst.2010.11.90.bijm.013. (in Chinese)

    Google Scholar 

  13. WANG Hai, LIU Geng, YANG Zhan. Multi-criteria comprehensive evaluation method of mechanical product design scheme [J]. Journal of Harbin Institute of Technology, 2014, 46(3): 99–103. DOI: 10.11918/hitxb20140317. (in Chinese)

    Google Scholar 

  14. SU Wei. Review and recognition on the research of multi-index comprehensive evaluation in China [J]. Statistical Research, 2012, 29(8): 98–107. DOI: 10.3969/j.issn.1002-4565.2012.08.016.

    Google Scholar 

  15. LI Peng, YU Guo-Yan. Survey on the multi-index comprehensive evaluation method [J]. Development & Innovation of Machinery & Electrical Products, 2009, 22(4): 24–25+28. DOI: 10.3969/j.issn.1002-6673.2009.04.010. (in Chinese)

    MathSciNet  Google Scholar 

  16. ZHANG Qiang, ZHANG Ji, JU Feng, GENG Dian. Backfill body's compression ratio design and control theory research in solid backfill coal mining [J]. Journal of the China Coal Society, 2014, 39(1): 64–71. DOI: 10.13225/j.cnki.jccs.2013.1239. (in Chinese)

    Google Scholar 

  17. ZHANG Ji. Study on strata movement controlling by raw waste backfilling with fully-mechanized coal winning technology and its engineering applications [D]. Xuzhou: China University of Mining and Technology, 2008. (in Chinese)

    Google Scholar 

  18. ZHANG Ji, LI Jiang, AN Tai, HUANG Yan. Deformation characteristic of key stratum overburden by raw waste backfilling with fully-mechanized coal minning technology [J]. Journal of China Coal Society, 2011, 36(10): 357–362. DOI: 10.13225/j.cnki.jccs.2010.03.008. (in Chinese)

    Google Scholar 

  19. HUANG Yan, ZHANG Ji, AN Bai, ZHANG Qiang. Overlying strata movement law in fully mechanized coal mining and backfilling longwall face by similar physical simulation [J]. Journal of Mining Science, 2011, 47(5): 618–627. DOI: 10.1134/S1062739147050108.

    Article  Google Scholar 

  20. LI Jian, ZHANG Ji, HUANG Yan, ZHANG Qiang, XU Jun. An investigation of surface deformation after fully mechanized, solid back fill mining [J]. International Journal of Mining Science and Technology, 2012, 22(4): 453–457. DOI: 10.3969/j.issn.2095-2686.2012.04.002.

    Article  Google Scholar 

  21. ZHOU Yue, ZHANGJi xiong, NIE Shou, ZHANG Qiang, ZHOU Nan. Mechanical analysis and kinematic simulation of a hydraulic support used in backfilling and the coal mining face [J]. Journal of China University of Mining and Technology, 2012, 41(3): 366–370. (in Chinese)

    Google Scholar 

  22. HUANG Yan. Ground control theory and application of solid dense backfill in coal mines [D]. Xuzhou: China University of Mining and Technology, 2012. (in Chinese)

    Google Scholar 

  23. ZHOU Yue, CHEN Yong, ZHANG Ji, HE Qi. Control principle and technology of final compression ratio of backfilling materials [J]. Journal of Mining and Safety Engineering, 2012, 29(3): 351–356. (in Chinese)

    Google Scholar 

  24. HUANG Yan, ZHANG Ji, DU Jie. Timedependence of backfilling body in fully mechanized backfilling mining face [J]. Journal of China University of Mining and Technology, 2012, 41(5): 697–701. (in Chinese)

    Google Scholar 

  25. HUANG Yan, ZHANG JI-xiong, ZHANG Qiang, NIE Shou. Backfilling technology of substituting waste and fly ash for coal underground in China coal mining area [J]. Environmental Engineering and Management Journal, 2011, 10(6): 769–775.

    Google Scholar 

  26. HUANG Yan, ZHANG Ji, NIE Shou, AN Bai. Strata movement control due to bulk factor of backfilling body in fully mechanized backfilling mining face [J]. Journal of Mining and Safety Engineering, 2012, 29(2): 162–167. DOI: 10.3969/j.issn.1673-3363.2012.02.003. (in Chinese)

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. School of Mechatronic Engineering, China University of Mining and Technology, Xuzhou, 221116, China

    Qiang Zhang  (张强) & Chang-long Du  (杜长龙)

  2. State Key Laboratory of Coal Resources and Safe Mining, School of Mines, China University of Mining and Technology, Xuzhou, 221116, China

    Qiang Zhang  (张强), Ji-xiong Zhang  (张吉雄), Jia-qi Wang  (王佳奇), Meng Li  (李猛) & Wen-yue Qi  (齐文跃)

Authors
  1. Qiang Zhang  (张强)
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Chang-long Du  (杜长龙)
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Ji-xiong Zhang  (张吉雄)
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Jia-qi Wang  (王佳奇)
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Meng Li  (李猛)
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Wen-yue Qi  (齐文跃)
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Ji-xiong Zhang  (张吉雄).

Additional information

Foundation item: Project(2017QNA21) supported by Fundamental Research Funds for the Central Universities, China; Project supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD), China

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhang, Q., Du, Cl., Zhang, Jx. et al. Backfill support’s backfill and operation properties and evaluation. J. Cent. South Univ. 25, 1524–1534 (2018). https://doi.org/10.1007/s11771-018-3845-1

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11771-018-3845-1

Key words

关键词

Search

Navigation